| Item Id- |
Origin |
Product Image |
Item Name |
Price |
Quantity |
wp836 wop |
Winchester Original Part |
|
ORIGINAL Buttplate screw with Flowered engraved in the head for the Winchester 1906, along with the 1902 and 1904 single-shot 22 rifles. These screws... |
$14.25
CLICK HERE
for More Info
or to Order
|
0 |
wp728 pin |
|
|
This is the pin magazine ring on the 1873 and 1892 lever action Winchester rifle using 25-20/32-20 cal. |
$2.85
CLICK HERE
for More Info
or to Order |
40 |
wp727-a pin |
|
|
This is the pin that holds the hanger on the Winchester model 1886 lever action rifle. |
$3.10
CLICK HERE
for More Info
or to Order |
33 |
wp726 pin |
|
|
This pin goes through the base of the Magazine Hanger (magazine ring) (part number 726) and holds the outer magazine tube from sliding out. This part... |
$3.65
CLICK HERE
for More Info
or to Order |
70 |
wp723 pin |
|
|
This is the pin the holds the magazine tight against the rear Magazine Hanger (magazine ring). It slides into a hole in the base of the rear mag... |
$2.25
CLICK HERE
for More Info
or to Order |
320 |
wp71-f |
|
|
Spring cover screw Winchester 1892 , 1894 , 1873 lever action. It also fits Winchester model 65, 66, 55, 53,1876 and model 53. This screw... |
$3.75
CLICK HERE
for More Info
or to Order |
129 |
wp69 |
|
|
Buttplate screw Winchester 1906, along with the Remington .22 rifles, Marlin and Stevens 22 rifles. These screws are one inch long with the FLAT... |
$3.20
CLICK HERE
for More Info
or to Order
|
0 |
wp66-b |
|
|
This is the tang screw (stock screw) Winchester 1890 Special or the 1906 EXPERT pump .22. It is longer than a standard tang screw, and attaches the... |
$6.50
CLICK HERE
for More Info
or to Order |
40 |
wp64-b1 |
|
|
This is the screw that attaches the Spring brass trap door on the buttplate of the Winchester 1866, 1876 and 1873 lever action rifles. The... |
$4.50
CLICK HERE
for More Info
or to Order |
25 |
wp622-b |
|
|
This is the tang screw also called stock screw Winchester model 64 rifle and 1887 lever action shotgun. This screw holds the stock onto the receiver. |
$9.95
CLICK HERE
for More Info
or to Order |
8 |
wp613 |
|
|
This screw attaches the lower tang to the main receiver on the rifle. There is one screw on each side. On the 2nd model lower tang the... |
$3.25
CLICK HERE
for More Info
or to Order |
19 |
wp605-b |
|
|
This is the screw that holds on the side plate on the FIRST and second model Winchester 1873. This only fits rifles that have a serial number below... |
$9.45
CLICK HERE
for More Info
or to Order |
22 |
wp601-b |
|
|
This is the receiver side tang screw FIRST model 1873. This screw attatches the lower receiver tang to the main frame on the rifle. The length is... |
$6.00
CLICK HERE
for More Info
or to Order |
13 |
wp580 |
|
|
This is the front guard screw Winchester model 70 pre 64. Also called the magazine cover hinge polate screw. |
$4.00
CLICK HERE
for More Info
or to Order |
96 |
wp58 |
|
|
This screw provides tension to the main spring (hammer spring (mainspring)) resulting in more pressure when the hammer strikes the firing pin when... |
$3.85
CLICK HERE
for More Info
or to Order |
329 |
wp579 |
|
|
This is the rear guard screw Winchester model 70 pre 64. |
$4.80
CLICK HERE
for More Info
or to Order |
97 |
wp578 |
|
|
This is the middle guard screw Winchester model 70 pre 64. |
$4.00
CLICK HERE
for More Info
or to Order |
98 |
wp57 |
|
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.95
CLICK HERE
for More Info
or to Order |
765 |
wp561 wop |
Winchester Original Part |
|
This is the bushing that the takedown screw goes through on the Winchester model 63 and 1903 rifle. |
$10.25
CLICK HERE
for More Info
or to Order
|
0 |
wp520 |
|
|
Tang Screw custom made extra LONG so it can be fit to any number of Winchester Lever Action rifles. It retains all... |
$8.25
CLICK HERE
for More Info
or to Order |
344 |
wp515 wop |
Winchester Original Part |
|
The is the bolt Winchester model 61 that attaches the stock to the reciever |
$8.50
CLICK HERE
for More Info
or to Order
|
0 |
wp502-c wop |
Winchester Original Part |
|
This is an ORIGINAL finger lever pin. The pin fits Winchester model 1894/64/55 and holds the finger lever to the bolt, providing a pivot lever to... |
$7.50
CLICK HERE
for More Info
or to Order |
1 |
wp48-a |
|
|
Takedown (Assembly)replacement (NEW) screw for either a Winchester 1890 - 1906 - 62 - 62A pump 22 rifle. This secures receiver to the trigger... |
$22.45
CLICK HERE
for More Info
or to Order |
9 |
wp473 |
|
|
This is the pin that holds the magazine plug in on the inner magazine tube Winchester model 63 |
$4.25
CLICK HERE
for More Info
or to Order |
9 |
wp47 |
|
|
This screw holds the main spring (hammer spring (mainspring)) in place. The screw goes through the lower tang and is attached to the anterior portion... |
$3.65
CLICK HERE
for More Info
or to Order |
70 |
wp43 |
|
|
Action slide handle (Forearm) screw for Winchester 1890 pump 22. This screw will fit all three models (1st 2nd and 3rd) of the 1890 and all 1906... |
$3.85
CLICK HERE
for More Info
or to Order |
98 |
wp41 |
|
|
This is the forearms screw also called the action slide handle screw. This is the screw that holds on the wooden forearm on the model 61 Winchester... |
$3.85
CLICK HERE
for More Info
or to Order |
198 |
wp40 |
|
|
This is the tang screw (also called the stock screw) Winchester 1890 and 1906 and model 62, 62A. This screw holds the stock to the receiver. |
$5.75
CLICK HERE
for More Info
or to Order |
249 |
wp349-b wop |
Winchester Original Part |
|
These are ORIGINAL screws that secure the forearm cap of the Winchester model 63 and 1903 to the tenon attached to the underside dovetail of the... |
$5.75
CLICK HERE
for More Info
or to Order |
6 |
wp349-a |
|
|
These are NEW BUTTPLATE SCREWS for THE 1903 AND 63 Winchester metal buttplate. These screws are shorter screw so they will not split the... |
$6.25
CLICK HERE
for More Info
or to Order |
38 |
wp330 wop |
Winchester Original Part |
|
ORIGINAL Winchester 1900, 1902, 59 trigger pin - also fits model 36. This pin goes completely through the stock and holds the trigger in place.... |
$9.00
CLICK HERE
for More Info
or to Order |
7 |
wp316-a wop |
Winchester Original Part |
|
Trigger pin ORIGINAL model 1904, 58, 60 and 60A Winchester single shot rifles. This pin fits sideways through the trigger and entire stock on the... |
$12.75
CLICK HERE
for More Info
or to Order |
19 |
wp302-a wop |
Winchester Original Part |
|
This is an ORIGINAL trigger guard screw for Winchester models 1900, 1902, 1904, 58, 67, 67A, 68, 69, 69A, 72 and 59. There are 2 screws needed... |
$5.75
CLICK HERE
for More Info
or to Order |
4 |
wp231 wop |
Winchester Original Part |
|
These are ORIGINAL large style slot head buttplate screws for regular black hardened plastic, crescent style and carbine style metal buttplates on... |
$8.25
CLICK HERE
for More Info
or to Order |
21 |
wp23-b |
|
|
This is the tang screw (stock screw) Winchester 1906 EXPERT and the very rare 1890 pistol grip pump THAT IS USED TO ATTACH A TANG SIGHT. The screw... |
$8.25
CLICK HERE
for More Info
or to Order |
18 |
wp23-a wop |
Winchester Original Part |
|
This is AN ORIGINAL takedown screw (also called the assembly screw) for the Winchester model 1903 and model 63. The stop pin for this part is p110... |
$39.50
CLICK HERE
for More Info
or to Order |
1 |
wp169-a wop |
Winchester Original Part |
|
Toggle Link Pin ORIGINAL for all Winchester 1873 rifles. |
$9.95
CLICK HERE
for More Info
or to Order
|
0 |
wp168-c wop |
Winchester Original Part |
|
This is an ORIGINAL finger lever latch (also called the finger lever catch) Winchester 1873 2nd and 3rd model. It fits all 1876 model... |
$56.00
CLICK HERE
for More Info
or to Order
|
0 |
wp168-b wop |
Winchester Original Part |
|
Finger Lever catch spring ORIGINAL for all Winchester 1873 guns. |
$32.00
CLICK HERE
for More Info
or to Order
|
0 |
wp168-a wop |
Winchester Original Part |
|
Finger Lever catch pin ORIGINAL for the Winchester 1873. This small pointed pin inserts through the finger-lever latch post and holds the... |
$6.40
CLICK HERE
for More Info
or to Order |
1 |
wp167-a wop |
Winchester Original Part |
|
This is an ORIGINAL Hammer PIN Winchester 1873. If you prefer to have a new PIN please see part number p124. Note: after approximately serial number... |
$9.50
CLICK HERE
for More Info
or to Order |
3 |
wp161-d wop |
Winchester Original Part |
|
Dust Cover spring screw ORIGINAL Winchester 1873 rifle and 1876 |
$6.75
CLICK HERE
for More Info
or to Order
|
0 |
wp161-a wop |
Winchester Original Part |
|
Dust Cover Stop screw ORIGINAL, Winchester 1873 2nd or 3rd model rifle and 1876 |
$6.75
CLICK HERE
for More Info
or to Order
|
0 |
wp160-b wop |
Winchester Original Part |
|
This is an ORIGINAL Plug screw that fits into the upper tang on the 1890 or 1906, 1903, 62, 62A, 63 1866 1873 1876 1892 1894 1886 1895, model 53 and... |
$4.75
CLICK HERE
for More Info
or to Order
|
0 |
wp153-b wop |
Winchester Original Part |
|
Takedown screw lock plunger spring ORIGINAL model 1903 and early 63 Winchester semiautomatic rifles. |
$2.50
CLICK HERE
for More Info
or to Order |
4 |
wp153-a wop |
Winchester Original Part |
|
Takedown screw lock ORIGINAL model 1903 and only the very early 63 Winchester rifles. |
$12.00
CLICK HERE
for More Info
or to Order |
6 |
wp130 wop |
Winchester Original Part |
|
This is the stop screw Winchester model 63 and 1903 extractor plunger. This screw is on the left side of the breech right in front of the extractor. |
$7.50
CLICK HERE
for More Info
or to Order |
2 |
wp1294-b wop |
Winchester Original Part |
|
Sear Spring Screw Winchester 1897 |
$3.75
CLICK HERE
for More Info
or to Order
|
0 |
wp119 |
|
|
This is the carrier stop screw Winchester model 61 |
$4.10
CLICK HERE
for More Info
or to Order
|
0 |
wp118 |
|
|
This is the Firing Pin Retracting Plunger Winchester model 61 pump .22 |
$3.50
CLICK HERE
for More Info
or to Order
|
0 |
wp114 wop |
Winchester Original Part |
|
This is the screw that holds in the ejector on the Winchester model 63 and 1903 .22 rifle |
$7.50
CLICK HERE
for More Info
or to Order |
1 |
wp112 |
|
|
These are the screws that securen the forearm cap of the Winchester model 63 and 1903 to the tenon attached to the underside of the barrel. They have... |
$4.50
CLICK HERE
for More Info
or to Order |
18 |
T767 |
|
|
One of the most effective lubricating and penetrating oils, that flows into the tiniest of crevices. This is the penetrating oil of choice... |
$23.50
CLICK HERE
for More Info
or to Order |
3 |
T722-a |
|
|
A MUST for anyone removing pins from guns - a Grace 4 piece BRASS starter Pin Punch Set that starts the pins for removal from their holes. ... |
$25.00
CLICK HERE
for More Info
or to Order
|
0 |
set94post-c wop |
Winchester Original Part |
|
This is an ORIGINAL discounted external screw set Winchester model 94 POST 64 Top eject Carbine. Your serial number should be from approximately... |
$82.00
CLICK HERE
for More Info
or to Order
|
0 |
set94post-c |
|
|
This is a discounted external screw set Winchester model 94 POST 64 Top eject Carbine. Your serial number should be from approximately 2,700,000 -... |
$55.75
CLICK HERE
for More Info
or to Order |
78 |
set9006-spec |
|
|
This discounted set consists of all of the external screws on the Winchester 1890 Deluxe and 1906 Expert (Both have pistol grip stocks) IF YOU HAVE A... |
$31.50
CLICK HERE
for More Info
or to Order |
18 |
set9006 wop |
Winchester Original Part |
|
This is for the person restoring Winchester guns who wants ORIGINAL parts - here is a packet of all original external screws Winchester 1890 and 1906... |
$49.00
CLICK HERE
for More Info
or to Order
|
0 |
set73-r wop |
Winchester Original Part |
|
This is a set of ORIGINAL screws for the Third Model1873 Sporting rifle. The set includes 2 Forearm-cap screws (wp56); 2 Finger lever spring/ Carrier... |
$96.00
CLICK HERE
for More Info
or to Order
|
0 |
set70 guard |
|
|
There are three guard screws on the Winchester model 70 pre 64: Front, Middle and Rear. All Three screws are included in this set. wp578... |
$12.95
CLICK HERE
for More Info
or to Order |
29 |
set62 |
|
|
This set consists of all of the external screws on the Winchester model 62 .22 cal rifle. Quite often, non-hollow ground screwdrivers are... |
$22.00
CLICK HERE
for More Info
or to Order |
40 |
set1895-c |
|
|
This is a discounted external screw set Winchester 1895 lever action CARBINE. (If your gun has a screw on the underside of your FORForearm rather... |
$46.56
CLICK HERE
for More Info
or to Order |
30 |
set1894-r wop |
Winchester Original Part |
|
A complete set of Winchester Factory ORIGINAL screws 1894 pre-64 SPORTING RIFLE. Each screw comes with label and in an individual pocket. THESE ARE... |
$49.00
CLICK HERE
for More Info
or to Order
|
0 |
set1894-c wop |
Winchester Original Part |
|
A complete set of Winchester Factory ORIGINAL screws 1894 pre-64 CARBINE. Each screw comes with label and in an individual pocket. THESE ARE ORIGINAL... |
$50.00
CLICK HERE
for More Info
or to Order
|
0 |
set1892-r |
|
|
This discounted set consists of all of the external screws on the Winchester 1892 RIFLE. (if you have 2 barrel bands that hold on forearm and... |
$38.50
CLICK HERE
for More Info
or to Order |
984 |
set1892-c |
|
|
This discounted set consists of all of the external screws on the Winchester 1892 CARBINE. (if you have a Forearm cap that uses 2 screws to hold the... |
$38.50
CLICK HERE
for More Info
or to Order |
16 |
set1886-r |
|
|
This discounted set consists of all of the external screws on the Winchester 1886 lever-action RIFLE (if you have 2 barrel bands that hold on forearm... |
$32.50
CLICK HERE
for More Info
or to Order |
14 |
set1886-c |
|
|
This discounted set consists of all of the external screws on the Winchester 1886 and lever action CARBINE (if you have a Forearm cap that uses 2... |
$38.75
CLICK HERE
for More Info
or to Order |
53 |
set1876-r |
|
|
This is an external screw set Winchester 1876 lever-action rifle. All screws are machined here in the U.S. to Winchester factory specs. Each screw is... |
$51.00
CLICK HERE
for More Info
or to Order |
43 |
set1873-r3 |
|
|
This is a discounted screw set Winchester 1873 3rd/ THIRD model lever action RIFLE. (If your gun has a barrel band rather than a forearm cap that... |
$63.25
CLICK HERE
for More Info
or to Order |
14 |
set1873-r2 |
|
|
This is a discounted external screw set Winchester 1873 2nd (SECOND) lever action RIFLE. (If your gun has a barrel band rather than a forearm cap... |
$69.75
CLICK HERE
for More Info
or to Order |
41 |
set1873-r1 |
|
|
This is a discounted external screw set Winchester 1873 1ST (FIRST) model lever action RIFLE. (If your gun has a barrel band rather than a forearm... |
$72.25
CLICK HERE
for More Info
or to Order |
42 |
set1873-c3 |
|
|
This is a discounted external screw set Winchester 1873 3rd (THIRD) model lever action CARBINE. (If your gun has a Forearm CAP rather than a barrel... |
$67.50
CLICK HERE
for More Info
or to Order |
42 |
set1873-c2 |
|
|
This is a discounted external screw set Winchester 1873 2nd (SECOND) model lever action CARBINE. (If your gun has a FORForearm CAP rather than a... |
$71.75
CLICK HERE
for More Info
or to Order |
56 |
set1873-c1 |
|
|
This is a discounted external screw set Winchester 1873 1ST (FIRST) model lever action CARBINE. (If your gun has a Forearm CAP rather than a barrel... |
$73.25
CLICK HERE
for More Info
or to Order |
63 |
set Scope |
|
|
If your rifle previously had a receiver mounted sight or scope it most likely used these holes. The screws that were used to hold the mount onto the... |
CLICK HERE
for More Info
or to Order |
200 |
set 1894-r |
|
|
This discounted set consists of all of the external screws on the Winchester 1894 RIFLE. (if you have 2 barrel bands that hold on forearm and... |
$39.50
CLICK HERE
for More Info
or to Order |
256 |
set 1894-c |
|
|
This discounted set consists of all of the external screws on the Winchester 1894 CARBINE made before 1964. (if you have a forForearm cap that uses 2... |
$39.50
CLICK HERE
for More Info
or to Order |
184 |
sav13-SCREW for Buttplate savop |
Savage Original Part |
|
This is an ORIGINAL Savage Buttplate SCREW. This screw also fits into the end hole of the trigger guard and attaches to the stock wood. |
$12.25
CLICK HERE
for More Info
or to Order |
1 |
s99-b sop |
Stevens Original Part |
|
Firing Pin Retainer Screw model 44 Stevens |
$4.75
CLICK HERE
for More Info
or to Order
|
0 |
s96-b sop |
Stevens Original Part |
|
Trigger Spring screw model 44 Stevens. This is an ORIGINAL Stevens part. |
$4.75
CLICK HERE
for More Info
or to Order |
1 |
s95-b sop |
Stevens Original Part |
|
TRIGGER SCREW model 44 Stevens. This is an ORIGINAL Stevens part. |
$4.95
CLICK HERE
for More Info
or to Order
|
0 |
s93-b sop |
Stevens Original Part |
|
Hammer Screw Stevens model 44 rolling block rifle. |
$5.50
CLICK HERE
for More Info
or to Order |
1 |
s9-b |
|
|
NEW Screw for Finger lever Stevens Favorite 22 rifle. Late production 1915 version with a thin (0.065") head. - also Breech bolt screw... |
$6.75
CLICK HERE
for More Info
or to Order |
12 |
s9-a |
|
|
Screw NEW for Finger lever Stevens Favorite 22 rifle. This screwfits early production rifles, and has a thick head (0.95")-with strong threads. |
$6.75
CLICK HERE
for More Info
or to Order |
18 |
s88 sop |
Stevens Original Part |
|
Stock ORIGINALTang Screw -- for the Upper and Lower tang on a Stevens model 70 and late Favorite rifles. This is a wood screw that goes through... |
$8.95
CLICK HERE
for More Info
or to Order
|
0 |
s71-b sop |
Stevens Original Part |
|
Stock screw for Stevens Crackshot. The upper tang and lower tang screw are the same size so two are needed to attach the receiver to the stock for... |
$9.00
CLICK HERE
for More Info
or to Order
|
0 |
s7-a short |
|
|
Screw for Forearm on a Stevens Favorite. The screw fits Favorite MODELS 1889, 1894, AND 1915. This screw holds the 6" wood forearm to... |
$9.50
CLICK HERE
for More Info
or to Order |
11 |
s7-a long |
|
|
Screw for the later and longer Forearm on a Stevens Favorite. The screw fits Favorite MODELS that have the 8" wood forearm to the barrel. |
$9.50
CLICK HERE
for More Info
or to Order |
1 |
s42-b sop |
Stevens Original Part |
|
Screw that holds the trigger spring in place on a Stevens Crackshot. This is an ORIGINAL part. Also fits Crackshot, Ideal, late Favorite,... |
$3.50
CLICK HERE
for More Info
or to Order |
3 |
s39-b sop |
Stevens Original Part |
|
Screw for securing the Mainspring of a Stevens 16 Crackshot ORIGINAL |
$4.95
CLICK HERE
for More Info
or to Order |
2 |
s30-b |
|
|
Screw for the Breech Block on a Stevens Crackshot. This screw goes across the receiver and holds the breech-block in place. |
$3.49
CLICK HERE
for More Info
or to Order |
8 |
s3-b sop |
Stevens Original Part |
|
SCREW for a Metal Butt plate ORIGINAL for Stevens Favorite .22 (will also fit Crackshot, Junior 14 and 141/2, and Savage Model 12 stocks)... |
$6.50
CLICK HERE
for More Info
or to Order |
5 |
s29-a |
|
|
A NEW Barrel (takedown) Screw for Stevens Crackshot (model 17) |
$23.00
CLICK HERE
for More Info
or to Order |
5 |
s146 sop |
Stevens Original Part |
|
An ORIGINAL Takedown (barrel) Screw for the Stevens Marksman 12 |
$36.00
CLICK HERE
for More Info
or to Order |
9 |
s14-b |
|
|
Screw that holds the trigger spring in place on a Stevens Favorite. This is a QUALITY NEW part. Also fits the trigger spring on the... |
$4.50
CLICK HERE
for More Info
or to Order |
10 |
s132-c sop |
Stevens Original Part |
|
Mainspring Plunger SCREW for Stevens Marksman 12 and 101 rifle ORIGINAL |
$9.00
CLICK HERE
for More Info
or to Order
|
0 |
s13-b sop |
Stevens Original Part |
|
This is an ORIGINAL Trigger SCREW for the early Stevens Favorite rifle. The trigger Screw is for securing the Trigger of a Stevens Favorite... |
$5.95
CLICK HERE
for More Info
or to Order
|
0 |
s129-b sop |
Stevens Original Part |
|
Screw ORIGINAL for the Hammer on a Stevens Marksman 12 and the Model 101. |
$5.25
CLICK HERE
for More Info
or to Order |
4 |
s128-c sop |
Stevens Original Part |
|
PIN for the Link on a Stevens Marksman 12 and 101 rifle ORIGINAL part |
$9.50
CLICK HERE
for More Info
or to Order |
3 |
s128-b sop |
Stevens Original Part |
|
Screw for the Link on a Stevens Marksman 12 and 101 rifle ORIGINAL part. This screw holds the link attached to the fingert lever. |
$12.50
CLICK HERE
for More Info
or to Order |
2 |
s127-b sop |
Stevens Original Part |
|
Screw ORIGINAL for the Joint between the frame and the barrel sleeve on a Stevens Marksman 12 AND mODEL 101. |
$16.25
CLICK HERE
for More Info
or to Order |
1 |
s12-b |
|
|
This is a NEW thick head Screw for the Hammer/trigger on 1889/1894 Stevens Favorite rifles. The head is 0.095 inches thick |
$3.25
CLICK HERE
for More Info
or to Order |
24 |
s118-b |
|
|
Lower Tang WOOD Screw on a Stevens model 70 , Favorite and other models that have wood screws for tang attachment |
$4.95
CLICK HERE
for More Info
or to Order |
14 |
s118-a |
|
|
Mainspring sSCREW for the Stevens Favorite that has mainspring with hole. This part was used in the late 1894 Stevens Favorite rifles... |
$5.95
CLICK HERE
for More Info
or to Order |
1 |
s113-b2 sop |
Stevens Original Part |
|
Screw (Dummy) for the Barrel PIN on the Stevens model 70 Visible Loader. This pin screws into the barrel pin, on the right side of the... |
$5.95
CLICK HERE
for More Info
or to Order
|
0 |
s112-a sop |
Stevens Original Part |
|
ORIGINAL Tang PLUG Screw on a Stevens model 70 , Favorite, Ideal, Marksman and other models that can have tang sights |
$6.95
CLICK HERE
for More Info
or to Order |
5 |
s111-c sop |
Stevens Original Part |
|
Trigger SCREW for a Stevens Marksman 12 and 101. Also fits little scout and late Stevens Favorite triggers ORIGINAL |
$5.25
CLICK HERE
for More Info
or to Order |
3 |
s11-b sop |
Stevens Original Part |
|
Screw for securing the Mainspring of a Stevens Favorite ORIGINAL |
$5.95
CLICK HERE
for More Info
or to Order |
1 |
s101-b sop |
Stevens Original Part |
|
Breech block PIN model 44 Stevens. This is an ORIGINAL Stevens part. |
$5.15
CLICK HERE
for More Info
or to Order |
1 |
s10-a1 sop |
Stevens Original Part |
|
Link PIN for the Stevens Favorite - and ORIGINAL Stevens part for the mid- and later-production Favorites. This pin holds the link in the... |
$4.50
CLICK HERE
for More Info
or to Order |
1 |
s1-a sop |
Stevens Original Part |
|
Screws ORIGINAL for Stevens Crackshot,Favorite, Ideal, Marksman, and other SMALL Stevens 22 rifles.buttplate. These screws are placed from top... |
$7.95
CLICK HERE
for More Info
or to Order |
4 |
rp168-b thick neck |
Remington Original Part |
|
This is the ORIGINAL Buttplate Screw from Remiongton 22 bolt action rifles. This screw was used on models like the 33, 32, 31 and 12B and... |
$9.25
CLICK HERE
for More Info
or to Order |
1 |
p172 |
|
|
This is the PIN for the trigger on a Winchester 1886 lever action rifle. The pin holds the trigger into the tang on the 1886 rifle and carbine. |
$6.50
CLICK HERE
for More Info
or to Order |
10 |
p170 |
|
|
In 1935 Winchester changed its locking system from using the protrusion on the firing pin as the breech bolt lock to this new system. If you... |
$11.50
CLICK HERE
for More Info
or to Order |
6 |
p169-b wop |
Winchester Original Part |
|
This is an ORIGINAL locking bolt pin stop screw Winchester 1892, 65 and model 53. It secures the locking bolt pin in place to prevent it from backing... |
$9.75
CLICK HERE
for More Info
or to Order |
1 |
p167 |
|
|
This is the finger lever lock jointvpin Winchester 1895. It is the smaller of the two split pins on the type 3 finger lever. It connects the bottom... |
$8.75
CLICK HERE
for More Info
or to Order
|
0 |
p166 |
|
|
This is the finger lever link pin Winchester 1895. It is a split pin that connects the top part of the loop on the finger lever to the rest of the... |
$6.25
CLICK HERE
for More Info
or to Order
|
0 |
p164 wop |
Winchester Original Part |
|
This is an original pin that holds the magazine plug on a Winchester 1890, 1906, 62 in the inner magazine tube |
$4.25
CLICK HERE
for More Info
or to Order |
3 |
p161 |
|
|
This is the firing pin stop pin Winchester model 62 pump .22 |
$4.25
CLICK HERE
for More Info
or to Order |
6 |
p160 |
|
|
This is the pin that holds the assembly screw lock in place on the model 1903 and very early 63 Winchester |
$2.50
CLICK HERE
for More Info
or to Order |
25 |
p159 wop |
Winchester Original Part |
|
Trigger Pin Winchester model 63 - 1903. This in goes through the trigger guard and secures the trigger in place. |
$2.50
CLICK HERE
for More Info
or to Order
|
0 |
p157 wop |
Winchester Original Part |
|
Hammer Pin model 63 Winchester ORIGINAL - also fits the 1903 Winchester. |
$3.25
CLICK HERE
for More Info
or to Order
|
0 |
p156 |
|
|
This is the Finger lever bushing Winchester 1886. ORIGINAL This bushing is what raises the locking bolts up. It is also what attaches the... |
$28.00
CLICK HERE
for More Info
or to Order
|
0 |
p155 |
|
|
This is the friction stud Winchester 189 a nd mod 53. This little stud has a spring behind it (part number wp566) and a pin (p147) that holds it into... |
$6.00
CLICK HERE
for More Info
or to Order
|
0 |
p154 wop |
Winchester Original Part |
|
This is the carrier stop Winchester 1892 in 25-20 and 32-20 cal rifles. A pin holds the carrier stop and carrier stop spring in on the left side of... |
$8.75
CLICK HERE
for More Info
or to Order |
5 |
p153 wop |
Winchester Original Part |
|
This is the carrier stop Winchester 1892 in 38-40 and 44-40 cal rifles. A pin holds the carrier stop and carrier stop spring in on the left side of... |
$10.75
CLICK HERE
for More Info
or to Order
|
0 |
p152 wop |
Winchester Original Part |
|
This is an ORIGINAL pin for the hammer spring (mainspring) abutment on the Winchester model 63 and 1903 |
$7.25
CLICK HERE
for More Info
or to Order |
12 |
p151-a wop |
Winchester Original Part |
|
This is the pin that holds in the magazine plug to the inner mag tube Winchester model 63 |
$4.25
CLICK HERE
for More Info
or to Order |
5 |
p150 |
|
|
This is the pin that holds in the cartridge cut off (wp137) Winchester model 63. |
$3.25
CLICK HERE
for More Info
or to Order
|
0 |
