Screws and Pins

This is for the person restoring Winchester guns who wants ORIGINAL parts - here is a packet of all original external screws Winchester 1890 and 1906...

This is a set of ORIGINAL screws for the Third Model1873 Sporting rifle. The set includes 2 Forearm-cap screws (wp56); 2 Finger lever spring/ Carrier...

A complete set of Winchester Factory ORIGINAL screws 1894 pre-64 SPORTING RIFLE. Each screw comes with label and in an individual pocket. THESE ARE...

ORIGINAL Buttplate screw with Flowered engraved in the head for the Winchester 1906, along with the 1902 and 1904 single-shot 22 rifles. These screws...

This is the carrier stop Winchester 1892 in 25-20 and 32-20 cal rifles. A pin holds the carrier stop and carrier stop spring in on the left side of...

Dust Cover spring screw ORIGINAL Winchester 1873 rifle and 1876 

This is the pin that holds the ejector in on the Winchester model 61

This is the stop screw Winchester model 63 and 1903 extractor plunger. This screw is on the left side of the breech right in front of the extractor.

Finger Lever catch pin ORIGINAL for the Winchester 1873.  This small pointed pin inserts through the finger-lever latch post and holds the...

This is an ORIGINAL finger lever pin. The pin fits Winchester model 1894/64/55 and holds the finger lever to the bolt, providing a pivot lever to...

These are ORIGINAL screws that secure the forearm cap of the Winchester model 63 and 1903 to the tenon attached to the underside dovetail of the...

This is an ORIGINAL Hammer PIN Winchester 1873. If you prefer to have a new PIN please see part number p124. Note: after approximately serial number...

This is the pin that hold the hammer in place on the Winchester model 61

This is the pin that hold the hammer spring (mainspring) guide rod in place.

This is an ORIGINAL locking bolt pin Winchester 1892, model 65 and 53. This pin connects the left and right locking bolts with the finger lever. It...

This is an original pin that holds the magazine plug on a Winchester 1890, 1906, 62 in the inner magazine tube

The is the bolt Winchester model 61 that attaches the stock to the reciever

This is the bushing that the takedown screw goes through on the Winchester model 63 and 1903 rifle.

Takedown screw lock plunger spring ORIGINAL model 1903 and early 63 Winchester semiautomatic rifles.

This is an ORIGINAL trigger guard screw for Winchester models 1900, 1902, 1904, 58, 67, 67A, 68, 69, 69A, 72 and 59. There are 2 screws needed...

Trigger pin ORIGINAL model 1904, 58, 60 and 60A Winchester single shot rifles. This pin fits sideways through the trigger and entire stock on the...

This is an ORIGINAL Plug screw that fits into the upper tang on the 1890 or 1906, 1903, 62, 62A, 63 1866 1873 1876 1892 1894 1886 1895, model 53 and...

Screw (Dummy) for the Barrel PIN on the Stevens model 70 Visible Loader.  This pin screws into the barrel pin, on the right side of the...

SCREW for a Metal Butt plate ORIGINAL for Stevens Favorite .22 (will also fit Crackshot, Junior 14 and 141/2,  and Savage Model 12 stocks)...

Firing Pin Retainer Screw model 44 Stevens

Hammer Screw Stevens model 44 rolling block rifle.

Link PIN for the Stevens Favorite - and ORIGINAL Stevens part for the mid- and later-production Favorites.  This pin holds the link in the...

Screw for the Link  on a Stevens Marksman 12 and 101 rifle ORIGINAL part.  This screw holds the link attached to the fingert lever.

Screw for securing the Mainspring of a Stevens Favorite ORIGINAL

Stock ORIGINALTang Screw -- for the Upper and Lower tang on a Stevens model 70 and late Favorite rifles.  This is a wood screw that goes through...

Stock screw for Stevens Crackshot. The upper tang and lower tang screw are the same size so two are needed to attach the receiver to the stock for...

TRIGGER SCREW model 44 Stevens. This is an ORIGINAL Stevens part.

Trigger Spring screw model 44 Stevens. This is an ORIGINAL Stevens part.

This is an ORIGINAL Savage Buttplate SCREW.  This screw also fits into the end hole of the trigger guard and attaches to the stock wood. 

If your rifle previously had a receiver mounted sight or scope it most likely used these holes. The screws that were used to hold the mount onto the...

This discounted set consists of all of the external screws on the Winchester 1886 and lever action CARBINE (if you have a Forearm cap that uses 2...

This discounted set consists of all of the external screws on the Winchester 1890 Deluxe and 1906 Expert (Both have pistol grip stocks) IF YOU HAVE A...

This is a discounted external screw set Winchester model 94 POST 64 Top eject Carbine. Your serial number should be from approximately 2,700,000 -...

There are three guard screws on the Winchester model 70 pre 64: Front, Middle and Rear.  All Three screws are included in this set.  wp578...

This is a discounted external screw set Winchester 1873 1ST (FIRST) model lever action RIFLE. (If your gun has a barrel band rather than a forearm...

This is a discounted external screw set Winchester 1873 2nd (SECOND) lever action RIFLE. (If your gun has a barrel band rather than a forearm cap...

This is a discounted screw set Winchester 1873 3rd/ THIRD model lever action RIFLE. (If your gun has a barrel band rather than a forearm cap that...

This discounted set consists of all of the external screws on the Winchester 1892 RIFLE. (if you have 2 barrel bands that hold on forearm and...

This is a discounted external screw set Winchester 1895 lever action CARBINE. (If your gun has a screw on the underside of your FORForearm rather...

This is the forearms screw also called the action slide handle screw. This is the screw that holds on the wooden forearm on the model 61 Winchester...

Takedown (Assembly)replacement (NEW) screw for either a Winchester 1890 - 1906 - 62 - 62A pump 22 rifle. This secures receiver to the trigger...

Screw for the Breech Block on a Stevens Crackshot. This screw goes across the receiver and holds the breech-block in place.

These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the...

Buttplate screw Winchester 1906, along with the Remington .22 rifles, Marlin and Stevens 22 rifles. These screws are one inch long with the FLAT...

This is the pin that holds the carrier lever to the carrier on the Winchester 1890, 1906, 62 or 62A

This is the carrier stop screw Winchester model 61

This is the pin that holds in the cartridge cut off (wp137) Winchester model 63.

This is the cartridge stop pin Winchester model 1892. It fits all callibers

This is the pin that holds the .22 cal extractor onto the top of the breech bolt on the Winchester .22 cal 1873 Rifle.

This is the extractor pin Winchester 1873 large .38 and .44 cal extractor.

This extractor pin is used on the Winchester models 1890, 1906, 62 and 62A. It goes in to0 the top of the bolt on the right side and down...

This is the Finger lever bushing Winchester 1886.  ORIGINAL This bushing is what raises the locking bolts up. It is also what attaches the...

This pin sits in the goove on the finger lever latch spring and holds the finger lever latch on to the receiver Winchester 1873 3rd model. And on...

This is the finger lever lock jointvpin Winchester 1895. It is the smaller of the two split pins on the type 3 finger lever. It connects the bottom...

Screw NEW for Finger lever Stevens Favorite 22 rifle. This screwfits early production rifles, and has a thick head (0.95")-with strong threads.

This is the finger lever pin joins the tip of the lever to the bolt. It provides a pivot lever to move the bolt back and forth on the Winchester 1886...

This is the pin that holds the finger lever into the receiver of the Winchester 1873 rifles. This pin goes through the receiver and finger lever and...

This pin retains the firing pin in the breechbolt on the Winchester 1895

This is the Firing Pin Retracting Plunger Winchester model 61 pump .22

This is the firing pin stop pin Winchester model 62 pump .22