Screws and Pins

Screw that holds the trigger spring in place on a Stevens Crackshot. This is an ORIGINAL part.  Also fits Crackshot, Ideal, late Favorite,...

Screw that holds the trigger spring in place on a Stevens Favorite. This is a QUALITY NEW  part.  Also fits the trigger spring on the...

TRIGGER SCREW model 44 Stevens. This is an ORIGINAL Stevens part.

Trigger Pin Winchester model 63 - 1903. This in goes through the trigger guard and secures the trigger in place.

ORIGINAL Winchester 1900, 1902, 59  trigger pin - also fits model 36. This pin goes completely through the stock and holds the trigger in place....

This is the PIN for the trigger on a Winchester 1886 lever action rifle. The pin holds the trigger into the tang on the 1886 rifle and carbine.

This is the pin Winchester 1892 and 1894 that holds in the trigger and sear in the lower tang. The Winchester 1892 uses a 1 piece trigger and sear so...

Toggle Link Pin ORIGINAL for all Winchester 1873 rifles.

Both the front and rear toggle link pins were the same dimention Winchester 1873. This pin will fit the front or the rear of the toggle links

This is the tang screw (stock screw) Winchester 1890 Special or the 1906 EXPERT pump .22. It is longer than a standard tang screw, and attaches the...

Stock screw for Stevens Crackshot. The upper tang and lower tang screw are the same size so two are needed to attach the receiver to the stock for...

This is the tang screw also called stock screw Winchester model 64 rifle and 1887 lever action shotgun. This screw holds the stock onto the receiver.

ORIGINAL Tang PLUG Screw on a Stevens model 70 , Favorite, Ideal, Marksman and other models that can have tang sights

This is the pin that holds the assembly screw lock in place on the model 1903 and very early 63 Winchester

This is the bushing that the takedown screw goes through on the Winchester model 63 and 1903 rifle.

Stock ORIGINALTang Screw -- for the Upper and Lower tang on a Stevens model 70 and late Favorite rifles.  This is a wood screw that goes through...

This is the receiver side tang screw FIRST model 1873. This screw attatches the lower receiver tang to the main frame on the rifle. The length is...

This is the screw that holds on the side plate on the FIRST and second model Winchester 1873. This only fits rifles that have a serial number below...

The sear pin will fit both type 1 and Type 2 recievers on the Winchester model 1895

A MUST for anyone removing pins from guns - a Grace 4 piece BRASS starter Pin Punch Set that starts the pins for removal from their holes. ...

This screw provides tension to the main spring (hammer spring (mainspring)) resulting in more pressure when the hammer strikes the firing pin when...

Mainspring sSCREW for the Stevens Favorite that has mainspring with hole.  This part was used in the late 1894 Stevens Favorite rifles...

Screw for securing the Mainspring of a Stevens Favorite ORIGINAL

This is the pin magazine ring on the 1873 and 1892 lever action Winchester rifle using 25-20/32-20 cal.

This is the pin that holds the magazine plug in on the inner magazine tube Winchester model 63

This is the pin that holds the hanger on the Winchester model 1886 lever action rifle.

This is an ORIGINAL locking bolt pin Winchester 1892, model 65 and 53. This pin connects the left and right locking bolts with the finger lever. It...

This is an ORIGINAL locking bolt pin stop screw Winchester 1892, 65 and model 53. It secures the locking bolt pin in place to prevent it from backing...

Screw for the Link  on a Stevens Marksman 12 and 101 rifle ORIGINAL part.  This screw holds the link attached to the fingert lever.

PIN for the Link on a Stevens Marksman 12 and 101 rifle ORIGINAL part

One of the most effective lubricating and penetrating oils, that flows into the tiniest of crevices.  This is the penetrating oil of choice...

This is the pin that holds the stirrup onto the hammer. The stirrup is what the mainspring (or hammer spring (mainspring)) attaches to putting...

This is the pin that hold the hammer spring (mainspring) guide rod in place.

This is the pin that holds the hammer spring (mainspring) abutment in place on the later production Winchester model 62A rifles. This pin goes right...

Screw ORIGINAL for the Hammer on a Stevens Marksman 12 and the Model 101.

This is the pin that hold the hammer in place on the Winchester model 61

Hammer Pin model 63 Winchester ORIGINAL - also fits the 1903 Winchester.

This is the rear guard screw Winchester model 70 pre 64.

This is the front guard screw Winchester model 70 pre 64.  Also called the magazine cover hinge polate screw.

This is the friction stud stop pin Winchester 1894, model 64 and model 55. It slides into the groove cut into the friction stud (wp158 and holds the...

Screw for Forearm on a Stevens Favorite.  The screw fits Favorite MODELS 1889, 1894, AND 1915. This screw holds the 6" wood forearm to...

This is the screw that holds on the forearm cap Winchester model 94 POST 64 for the COMMEMARATIVE one screw style  Fore arm cap (e.g.,...

These are the screws that securen the forearm cap of the Winchester model 63 and 1903 to the tenon attached to the underside of the barrel. They have...

This is the firing pin stop pin Winchester model 63 and 1903. The pin holds the firing pin in place on the model 63 and on the model 1903, this pin...

This pin fits the Winchester model 62 or 62A. 2 pins located on the left side of bolt, go down through the firing pin stop to hold...

This is the pin that holds the Winchester 1873 .22 cal firing pin, or piston to the breech bolt. The firing pin set up was different on the .22 cals...

This pin retains the firing pin in the breechbolt on the Winchester 1895

This is the pin that holds the finger lever into the receiver of the Winchester 1873 rifles. This pin goes through the receiver and finger lever and...

This is the finger lever pin joins the tip of the lever to the bolt. It provides a pivot lever to move the bolt back and forth on the Winchester 1886...

This is an ORIGINAL finger lever pin. The pin fits Winchester model 1894/64/55 and holds the finger lever to the bolt, providing a pivot lever to...

NEW Screw for Finger lever Stevens Favorite 22 rifle. Late production 1915 version with a thin (0.065") head. - also Breech bolt screw...

This is the finger lever link pin Winchester 1895. It is a split pin that connects the top part of the loop on the finger lever to the rest of the...

This pin sits in the goove on the finger lever latch spring and holds the finger lever latch on to the receiver Winchester 1873 3rd model. And on...

Finger Lever catch spring ORIGINAL for all Winchester 1873 guns.

This is the Finger lever bushing Winchester 1886.  ORIGINAL This bushing is what raises the locking bolts up. It is also what attaches the...

This is the extractor pin that fits the Winchester model 1894 , 64, 55. and 1892 . This is also the pin that is used on the 1894 and 1895...

The is the extractor pin Winchester 1876 all cals.

This is the pin that holds the .32 cal extractor onto the top of the breech bolt on the Winchester .32 cal 1873 Rifles.

This is the ejector stop pin Winchester 1894 (pre 64). The ejector stop pin hole is 3/64 inches behind the front of the ejector. The pin is flush...

This is the pin that holds the ejector in on the Winchester model 61

Dust Cover spring screw ORIGINAL Winchester 1873 rifle and 1876 

This is the pin that holds the cartridge stop (wp3A) in the carrier of the Winchester 1906 and 62 or 62A. If you have a carrier that only holds the...

This is the pin cartridge cut off on the Winchester model 61. It is also lower extractor

This is the carrier stop pin Winchester model 61

This is the carrier stop Winchester 1892 in 25-20 and 32-20 cal rifles. A pin holds the carrier stop and carrier stop spring in on the left side of...