Item Id |
Origin |
Product Image |
Item Name |
Price |
Quantity+ |
p126 |
|
|
This is the safety catch pin Winchester 1873, 1894 and 1876 lever action rifle. This pin holds the safety bar in the lower tang (also called trigger... |
$3.25 CLICK HERE for More Info or to Order |
32 |
wp727-a pin |
|
|
This is the pin that holds the hanger on the Winchester model 1886 lever action rifle. |
$3.10 CLICK HERE for More Info or to Order |
35 |
p111 |
|
|
This extractor pin is used on the Winchester models 1890, 1906, 62 and 62A. It goes in to0 the top of the bolt on the right side and down... |
$3.50 CLICK HERE for More Info or to Order |
36 |
p122 |
|
|
This is the pin that holds the trigger and sear in place on the Winchester model 1873 lower tang. Up to serial number 28,000 this pin was inside of... |
$3.25 CLICK HERE for More Info or to Order |
37 |
wp349-a |
|
|
These are NEW BUTTPLATE SCREWS for THE 1903 AND 63 Winchester metal buttplate. These screws are shorter screw so they will not split the... |
$6.25 CLICK HERE for More Info or to Order |
40 |
wp728 pin |
|
|
This is the pin magazine ring on the 1873 and 1892 lever action Winchester rifle using 25-20/32-20 cal. |
$2.85 CLICK HERE for More Info or to Order |
40 |
wp66-b |
|
|
This is the tang screw (stock screw) Winchester 1890 Special or the 1906 EXPERT pump .22. It is longer than a standard tang screw, and attaches the... |
$6.50 CLICK HERE for More Info or to Order |
40 |
set62 |
|
|
This set consists of all of the external screws on the Winchester model 62 .22 cal rifle. Quite often, non-hollow ground screwdrivers are... |
$22.00 CLICK HERE for More Info or to Order |
42 |
set1873-r1 |
|
|
This is a discounted external screw set Winchester 1873 1ST (FIRST) model lever action RIFLE. (If your gun has a barrel band rather than a forearm... |
$72.25 CLICK HERE for More Info or to Order |
43 |
set1873-r2 |
|
|
This is a discounted external screw set Winchester 1873 2nd (SECOND) lever action RIFLE. (If your gun has a barrel band rather than a forearm cap... |
$69.75 CLICK HERE for More Info or to Order |
43 |
set1873-c3 |
|
|
This is a discounted external screw set Winchester 1873 3rd (THIRD) model lever action CARBINE. (If your gun has a Forearm CAP rather than a barrel... |
$67.50 CLICK HERE for More Info or to Order |
43 |
p110 |
|
|
This is the tiny little pin that goes into the end of the assembly screw (take down screw) on the Winchester 1890 - 1906, mod 62 and also fits... |
$2.55 CLICK HERE for More Info or to Order |
43 |
set1876-r |
|
|
This is an external screw set Winchester 1876 lever-action rifle. All screws are machined here in the U.S. to Winchester factory specs. Each screw is... |
$51.00 CLICK HERE for More Info or to Order |
45 |
p124 |
|
|
This is the pin that holds the hammer in place on the Winchester model 1873 |
$4.05 CLICK HERE for More Info or to Order |
47 |
set1886-c |
|
|
This discounted set consists of all of the external screws on the Winchester 1886 and lever action CARBINE (if you have a Forearm cap that uses 2... |
$38.75 CLICK HERE for More Info or to Order |
53 |
set1873-c2 |
|
|
This is a discounted external screw set Winchester 1873 2nd (SECOND) model lever action CARBINE. (If your gun has a FORForearm CAP rather than a... |
$71.75 CLICK HERE for More Info or to Order |
56 |
set1873-c1 |
|
|
This is a discounted external screw set Winchester 1873 1ST (FIRST) model lever action CARBINE. (If your gun has a Forearm CAP rather than a barrel... |
$73.25 CLICK HERE for More Info or to Order |
64 |
p120 |
|
|
This pin sits in the goove on the finger lever latch spring and holds the finger lever latch on to the receiver Winchester 1873 3rd model. And on... |
$4.50 CLICK HERE for More Info or to Order |
66 |
set1892-c |
|
|
This discounted set consists of all of the external screws on the Winchester 1892 CARBINE. (if you have a Forearm cap that uses 2 screws to hold the... |
$38.50 CLICK HERE for More Info or to Order |
70 |
wp726 pin |
|
|
This pin goes through the base of the Magazine Hanger (magazine ring) (part number 726) and holds the outer magazine tube from sliding out. This part... |
$3.65 CLICK HERE for More Info or to Order |
76 |
p131 |
|
|
This is the cartridge stop pin Winchester model 1892. It fits all callibers |
$3.25 CLICK HERE for More Info or to Order |
78 |
wp47 |
|
|
This screw holds the main spring (hammer spring (mainspring)) in place. The screw goes through the lower tang and is attached to the anterior portion... |
$3.65 CLICK HERE for More Info or to Order |
78 |
set94post-c |
|
|
This is a discounted external screw set Winchester model 94 POST 64 Top eject Carbine. Your serial number should be from approximately 2,700,000 -... |
$55.75 CLICK HERE for More Info or to Order |
80 |
p142 |
|
|
This is the friction stud stop pin Winchester 1894, model 64 and model 55. It slides into the groove cut into the friction stud (wp158 and holds the... |
$2.25 CLICK HERE for More Info or to Order |
87 |
wp580 |
|
|
This is the front guard screw Winchester model 70 pre 64. Also called the magazine cover hinge polate screw. |
$4.00 CLICK HERE for More Info or to Order |
96 |
wp579 |
|
|
This is the rear guard screw Winchester model 70 pre 64. |
$4.80 CLICK HERE for More Info or to Order |
97 |
wp578 |
|
|
This is the middle guard screw Winchester model 70 pre 64. |
$4.00 CLICK HERE for More Info or to Order |
98 |
wp43 |
|
|
Action slide handle (Forearm) screw for Winchester 1890 pump 22. This screw will fit all three models (1st 2nd and 3rd) of the 1890 and all 1906... |
$3.85 CLICK HERE for More Info or to Order |
113 |
wp71-f |
|
|
Spring cover screw Winchester 1892 , 1894 , 1873 lever action. It also fits Winchester model 65, 66, 55, 53,1876 and model 53. This screw... |
$3.75 CLICK HERE for More Info or to Order |
132 |
set 1894-c |
|
|
This discounted set consists of all of the external screws on the Winchester 1894 CARBINE made before 1964. (if you have a forForearm cap that uses 2... |
$39.50 CLICK HERE for More Info or to Order |
186 |
set Scope |
|
|
If your rifle previously had a receiver mounted sight or scope it most likely used these holes. The screws that were used to hold the mount onto the... |
CLICK HERE for More Info or to Order |
224 |
wp40 |
|
|
This is the tang screw (also called the stock screw) Winchester 1890 and 1906 and model 62, 62A. This screw holds the stock to the receiver. |
$5.75 CLICK HERE for More Info or to Order |
251 |
set 1894-r |
|
|
This discounted set consists of all of the external screws on the Winchester 1894 RIFLE. (if you have 2 barrel bands that hold on forearm and... |
$39.50 CLICK HERE for More Info or to Order |
271 |
wp723 pin |
|
|
This is the pin the holds the magazine tight against the rear Magazine Hanger (magazine ring). It slides into a hole in the base of the rear mag... |
$2.25 CLICK HERE for More Info or to Order |
321 |
wp58 |
|
|
This screw provides tension to the main spring (hammer spring (mainspring)) resulting in more pressure when the hammer strikes the firing pin when... |
$3.85 CLICK HERE for More Info or to Order |
330 |
wp520 |
|
|
Tang Screw custom made extra LONG so it can be fit to any number of Winchester Lever Action rifles. It retains all... |
$8.25 CLICK HERE for More Info or to Order |
346 |
p123 |
|
|
Both the front and rear toggle link pins were the same dimention Winchester 1873. This pin will fit the front or the rear of the toggle links |
$4.25 CLICK HERE for More Info or to Order |
461 |
wp57 |
|
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.95 CLICK HERE for More Info or to Order |
793 |
set1892-r |
|
|
This discounted set consists of all of the external screws on the Winchester 1892 RIFLE. (if you have 2 barrel bands that hold on forearm and... |
$38.50 CLICK HERE for More Info or to Order |
987 |