Item Id |
Origin |
Product Image |
Item Name |
Price+ |
Quantity |
set Scope |
|
|
If your rifle previously had a receiver mounted sight or scope it most likely used these holes. The screws that were used to hold the mount onto the... |
CLICK HERE for More Info or to Order |
194 |
manual-1894 |
|
|
This spiral bound book contains instructions on how to successfully disassemble your 1894 lever-action Winchester rifle. All 1894 rifles are... |
CLICK HERE for More Info or to Order |
481 |
mt-Large |
|
|
This is the LARGE CALIBER magazine tube for Winchester lever action rifle and carbine in models 1866, 1873, 1892, 1894 (pre and post 64), in... |
CLICK HERE for More Info or to Order |
9 |
wp533 |
Winchester Original Part |
|
This is a BLUED plug screw 8-40 thread. It is blued and ready to install. |
$2.00 CLICK HERE for More Info or to Order
|
0 |
wp46-a |
|
|
These BLUED plug screws fill the holes that were drilled scope on a model 70 Winchester receiver. They are also the screws Winchester PRE and POST 64... |
$2.75 CLICK HERE for More Info or to Order
|
0 |
c150 |
Winchester Original Part |
|
This is the pin that holds the firing pin striker in place on the Winchester model 94 POST 64 |
$3.25 CLICK HERE for More Info or to Order
|
0 |
c103-b |
Winchester Original Part |
|
This is the upper tang plug screw Winchester model 94 POST 64. It fills the hole behind the hammer where you would put the front screw tang mounted... |
$3.25 CLICK HERE for More Info or to Order
|
0 |
c158 |
Winchester Original Part |
|
This is the pin that holds the friction stud in place on the Winchester model 94 POST 64 link |
$3.65 CLICK HERE for More Info or to Order |
12 |
wp534 |
|
|
This is a BLUED plug screw 8-40 thread. These screws DO HAVE a little head on them and will not screw all the way through the receiver. This is the... |
$3.75 CLICK HERE for More Info or to Order
|
0 |
wp46-b |
|
|
This is a STAINLESS STEEL plug screw 8-40 thread. These screws DO HAVE a little head on them and will not screw all the way through the receiver.... |
$3.75 CLICK HERE for More Info or to Order |
72 |
c103-a |
Winchester Original Part |
|
This is the screw that holds on the front barrel band Winchester model 94 POST 64 carbine. The front band sits behind the front sight. NOTE if you... |
$4.05 CLICK HERE for More Info or to Order |
58 |
c180 |
|
|
This is the friction stud SPRING that goes in the stock Forearm of the link (link is the part that the finger lever goes through) This little... |
$4.15 CLICK HERE for More Info or to Order |
2 |
c130 |
|
|
This is the tang screw (stock screw) Winchester 94 POST 64. This screw attaches the wood stock to the receiver. (the XTR takes a different tang screw) |
$4.15 CLICK HERE for More Info or to Order
|
0 |
c109 |
Winchester Original Part |
|
This is the coil type trigger spring Winchester model 94 POST 64 |
$4.15 CLICK HERE for More Info or to Order
|
0 |
c101-a |
Winchester Original Part |
|
This is the screw that holds on the rear barrel band on the Winchester model 94 POST 64 carbine rifle. It goes through the wooden forearm. NOTE ir... |
$4.25 CLICK HERE for More Info or to Order |
76 |
c127-b |
Winchester Original Part |
|
This is the Rolled pin that attaches the finger lever to the link (part on under side of receiver) on the Winchester 94 POST 64. This is not... |
$4.25 CLICK HERE for More Info or to Order
|
0 |
c147 |
Winchester Original Part |
|
This is the screw that holds the hammer in place on the Winchester model 94 POST 64 |
$4.25 CLICK HERE for More Info or to Order |
169 |
c163 |
|
|
This is the link screw Winchester model 94 POST 64. It fits top eject and angle eject below serial number 5,550,001 |
$4.25 CLICK HERE for More Info or to Order |
117 |
c104-a |
Winchester Original Part |
|
This is the screw that attaches the Loading gate (spring cover) to the receiver of the Winchester model 94 POST 64. It is used with all... |
$4.25 CLICK HERE for More Info or to Order |
188 |
c164 |
|
|
This is the screw that puts tension on the underside of the mainspring on your Winchester 94 POST 64 rifles. |
$4.25 CLICK HERE for More Info or to Order |
21 |
wp540-c |
|
|
This is a STAINLESS STEEL straight plug screw 8-40 thread. If you are looking screw that has a positive stop, see part number wp46-b |
$4.25 CLICK HERE for More Info or to Order |
7 |
c102-a |
Winchester Original Part |
|
This is the carrier screw Winchester model 94 POST 64. Also fits the 94 lever shotgun model 9410 |
$4.50 CLICK HERE for More Info or to Order |
158 |
c118 |
Winchester Original Part |
|
This is the cartridge guide screw Winchester 94 POST 64. Will not work on cals 44 rem, 45C or 44-40 |
$4.50 CLICK HERE for More Info or to Order |
368 |
c184 |
|
|
This is the pin that holds the ejector in place on the Winchester 94 POST 64 top eject bolt. Also fits the 94-22 |
$4.50 CLICK HERE for More Info or to Order |
1 |
c141 |
Winchester Original Part |
|
This is the retaining screw(s) that hold the extracor in place on the Winchester 94 POST 64. |
$4.50 CLICK HERE for More Info or to Order |
23 |
c100-a |
|
|
This is the finger lever pin stop screw Winchester model 94 POST 64. The tip of this screw does not have threads on the Forearm. This screw is on the... |
$4.50 CLICK HERE for More Info or to Order |
38 |
wp595 |
|
|
This is the wood swivel stud that screws into forearm on rifles to attach sling to. |
$4.50 CLICK HERE for More Info or to Order |
18 |
c121 |
|
|
This is the magazine plug screw that goes through the magazine tube and holds in the magazine plug (part number C120) in place on the Winchester... |
$4.75 CLICK HERE for More Info or to Order |
142 |
c151 wop |
Winchester Original Part |
|
This is an ORIGINAL pin that holds the trigger and sear in place Winchester model 94 POST 64 |
$4.85 CLICK HERE for More Info or to Order |
15 |
wp57 |
|
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.95 CLICK HERE for More Info or to Order |
733 |
c153 |
Winchester Original Part |
|
This is the little spring that goes around the Forearm of the friction stud on the Winchester model 94 POST 64. |
$5.00 CLICK HERE for More Info or to Order
|
0 |
c108-b |
|
|
this is the pin that holds the safety bar aka trigger block into the lower tang on the Winchester model 94 POST 64. |
$5.00 CLICK HERE for More Info or to Order |
5 |
c152 |
Winchester Original Part |
|
This is the screw that holds on the front sight ramp on the Winchester model 94 POST 64. (this is front ramp that is removable--not soldered on) |
$5.00 CLICK HERE for More Info or to Order
|
0 |
c104-b |
Winchester Original Part |
|
This is the cartridge block screw .357 mag Winchester POST 64. It holds the cartridge block in place, part number C105B |
$5.25 CLICK HERE for More Info or to Order |
16 |
c126-a |
|
|
This is the screw that holds in the cartridge guides on the 44 rem and 45 colt caliber Winchester 94 POST 64 angle eject rifles. |
$5.25 CLICK HERE for More Info or to Order
|
0 |
c126-b |
|
|
This is the cartridge stop Winchester 94 POST 64 top eject 44 mag. This part keeps the cartridges in the mag tube and stops them from going under the... |
$5.25 CLICK HERE for More Info or to Order
|
0 |
c102-b |
Winchester Original Part |
|
This is the ejector spring Winchester 94 post 64. It will NOT fit 44 rem, 45 colt or 357 mag |
$5.25 CLICK HERE for More Info or to Order |
2 |
c170 |
|
|
This is the hammer stop plunger spring Winchester model 94 POST 64 |
$5.25 CLICK HERE for More Info or to Order
|
0 |
c192 |
|
|
This is the Hammer stop plunger Angle eject Winchester model 94 POST 64 |
$5.25 CLICK HERE for More Info or to Order |
9 |
c185 |
|
|
This is the plastic plug saddle ring hole on the receiver of the Winchester 94 POST 64. If you take your saddle ring off this plug will fill the... |
$5.25 CLICK HERE for More Info or to Order
|
0 |
c105-a |
Winchester Original Part |
|
This is the carrier spring screw Winchester model 94 POST 64. This holds the carrier spring (part number C117 or C143) to the receiver. |
$5.50 CLICK HERE for More Info or to Order |
149 |
c128-b |
Winchester Original Part |
|
This is an ORIGINAL retaining pin (2 are required) that holds the extractor in place on the Winchester 94 POST 64. |
$5.50 CLICK HERE for More Info or to Order
|
0 |
c100-b |
Winchester Original Part |
|
This is the link pin stop screw Winchester 94 POST 64. It fits rifles with serial number above 5,500,001, It also fits the model 9410 shotgun |
$5.50 CLICK HERE for More Info or to Order |
32 |
c140 |
Winchester Original Part |
|
This is the link pin Winchester 94 POST 64 over serial number 5,500,001. This pin attaches your link to the receiver. The screw that holds this pin... |
$5.50 CLICK HERE for More Info or to Order |
19 |
wp284 wop |
Winchester Original Part |
|
These are ORIGINAL style Phillips head buttplate screws FOR THE flat hard black plastic style buttplates found on the POST-64 Winchester... |
$5.75 CLICK HERE for More Info or to Order |
13 |
c193 |
|
|
This is the magazine plug screw that goes through the magazine tube and holds the magazine plug in place on the Winchester model 94 POST 64 ANGLE... |
$6.25 CLICK HERE for More Info or to Order |
10 |
c138-b |
|
|
This is the OUTER ejector spring 44 MAG ejector of the Winchester model 94 POST 64 Top eject. |
$6.50 CLICK HERE for More Info or to Order |
3 |
c138-a |
Winchester Original Part |
|
This is the ejector spring Winchester 94 POST 64. It fits calibers 44 rem, 357 magnum and 45 colt. |
$6.75 CLICK HERE for More Info or to Order
|
0 |
c149 |
Winchester Original Part |
|
This is the pin that holds the finger lever into the bolt on the Winchester model 94 POST 64. The finger lever pin stop screw, part number C100A is... |
$6.75 CLICK HERE for More Info or to Order |
24 |
c148 |
Winchester Original Part |
|
This is the firing pin striker Winchester model 94 POST 64 |
$7.45 CLICK HERE for More Info or to Order |
13 |
c106 |
|
|
This is the hammer spring (mainspring) also called the mainspring Winchester 94 POST 64. This is the coil type mainspring that fits over the hammer... |
$7.50 CLICK HERE for More Info or to Order |
9 |
c162 |
|
|
This is the pin that attaches the finger lever to the link (part on under side of receiver) on the Winchester 94 POST 64. This is not the pin that... |
$7.75 CLICK HERE for More Info or to Order
|
0 |
c107-b |
|
|
This is the hard to find saddle ring plug screw Winchester 94 POST 64. (it will not fit the pre 64 models) It has the correct 8x36 thread . If you... |
$7.85 CLICK HERE for More Info or to Order |
13 |
c165 |
|
|
This screw holds the mainspring onto the receiver on the Winchester 94 POST 64 rifles that have serial numbers 2,700,000-4,580,000. |
$8.00 CLICK HERE for More Info or to Order
|
0 |
wp231 wop |
Winchester Original Part |
|
These are ORIGINAL large style slot head buttplate screws for regular black hardened plastic, crescent style and carbine style metal buttplates on... |
$8.25 CLICK HERE for More Info or to Order |
21 |
wp520 |
|
|
Tang Screw custom made extra LONG so it can be fit to any number of Winchester Lever Action rifles. It retains all... |
$8.25 CLICK HERE for More Info or to Order |
344 |
c168 |
|
|
This is the TAPERED barrel band screw front band on the Winchester 94 POST 64. It fits band part number c167 |
$8.50 CLICK HERE for More Info or to Order
|
0 |
st207-c |
|
|
These are screws (you need two) that holds on the rear semi-buckhorn sight of the post-64 Winchester 94 rifle. The metal base is attached to the... |
$8.75 CLICK HERE for More Info or to Order |
75 |
c181 |
|
|
This is the friction stud that goes in the stock Forearm of the link (link is the part that the finger lever goes through) This little stud has a... |
$8.95 CLICK HERE for More Info or to Order
|
0 |
c114-c |
|
|
This is the Forearm cap SCREW for the Winchester 94 POST 64 Rifle. It holds the wood forearm onto the rifle with the ROUND or... |
$9.00 CLICK HERE for More Info or to Order |
3 |
c101-b |
Winchester Original Part |
|
This is the screw that holds on the forearm cap Winchester model 94 POST 64 for the COMMEMARATIVE one screw style Fore arm cap (e.g.,... |
$9.50 CLICK HERE for More Info or to Order |
17 |
ms73post-c wop |
Winchester Original Part |
|
This is an ORIGINAL magazine spring Winchester 94 POST-64 TOP EJECT CARBINE. This spring FITS A CARBINE AND COMES WITH instructions on how to... |
$9.75 CLICK HERE for More Info or to Order
|
0 |
mt25 |
|
|
This is the plastic magazine tube limiter 19 to 19 3/4 inch barrels on the Winchester model 94 POST 64 |
$10.00 CLICK HERE for More Info or to Order |
1 |
c183 |
|
|
This is the mainspring base Winchester 94 POST 64. It fits rifles with serial numbers 2,700,000-4,580,000. It sits under the mainspring (C182)and... |
$10.00 CLICK HERE for More Info or to Order |
5 |
ms73-94post wop |
Winchester Original Part |
|
This is the magazine spring Winchester 94 POST 64. This spring is ORIGINAL factory It is for all cals |
$10.75 CLICK HERE for More Info or to Order
|
0 |
c160 |
Winchester Original Part |
|
This is the friction stude Winchester model 64 POST 64. This part helps keep the link in place when the lever is closed. |
$12.00 CLICK HERE for More Info or to Order
|
0 |
c142 |
Winchester Original Part |
|
This is the cover carrier spring on the Winchester 94 POST 64 |
$14.25 CLICK HERE for More Info or to Order
|
0 |
c117 |
Winchester Original Part |
|
This is the carrier spring Winchester 94 POST 64 30-30 caliber rifles. |
$14.25 CLICK HERE for More Info or to Order |
29 |
c143 |
Winchester Original Part |
|
This is the carrier spring Winchester 94 POST 64 in 357 mag caliber. It is held in place by screw C105. |
$14.75 CLICK HERE for More Info or to Order |
4 |
c194-b wop |
Winchester Original Part |
|
Hammer Spur Extension Winchester 94 post-64 ORIGINAL. This is for the 9410 series of angle and top eject rifles. The threaded end... |
$16.00 CLICK HERE for More Info or to Order
|
0 |
c105-b |
Winchester Original Part |
|
This is the cartridge block 357 mag Winchester 94 POST 64. The screw used for this part is C104B |
$16.25 CLICK HERE for More Info or to Order |
8 |
c169 |
|
|
This is the magazine Forearm plug Winchester 94 POST 64. It has the rounded head with a slot in it. It fits the angle and top eject models. use screw... |
$16.50 CLICK HERE for More Info or to Order
|
0 |
st77 |
|
|
This is the front site Winchester 1894 pre and post 64 and model 70. It is .290 high and fits onto the ramp on the Forearm of the barrel. (also fits... |
$16.50 CLICK HERE for More Info or to Order
|
0 |
st73 |
|
|
This is the 26MR RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or screwed on the... |
$16.50 CLICK HERE for More Info or to Order
|
0 |
st75 |
|
|
This is the 29MR RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or screwed on the... |
$16.50 CLICK HERE for More Info or to Order
|
0 |
st5 |
|
|
This is the 31MR RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or screwed on the... |
$16.50 CLICK HERE for More Info or to Order
|
0 |
st6 |
|
|
This is the 31MR RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or screwed on the... |
$16.50 CLICK HERE for More Info or to Order
|
0 |
st29 |
|
|
34MR RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or screwed on the Forearm of... |
$16.50 CLICK HERE for More Info or to Order
|
0 |
st76 |
|
|
This is the 37MR RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or screwed on the... |
$16.50 CLICK HERE for More Info or to Order
|
0 |
st72 |
|
|
This is the 37MR RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or screwed on the... |
$16.50 CLICK HERE for More Info or to Order
|
0 |
c108-a |
Winchester Original Part |
|
This is the trigger stop also called the safety bar Winchester model 94 POST 64. The pin portion in the middle of this part comes down through the... |
$16.75 CLICK HERE for More Info or to Order |
20 |
c110-b |
Winchester Original Part |
|
This is the trigger Winchester 94 POST 64 |
$18.00 CLICK HERE for More Info or to Order |
9 |
c189 |
|
|
This is the sear Winchester model 94 POST 64 Angle Eject rifle. it fits serial numbers above 6 million. NOTE: Top ejects use a different shape sear... |
$18.75 CLICK HERE for More Info or to Order |
6 |
bp810 |
|
|
Buttplate Winchester model 94 post-64 and Winchester model 12 in 28 gauge. It is a reproduction of an original buttplate made from high quality... |
$21.25 CLICK HERE for More Info or to Order
|
0 |
st70 |
|
|
This is the 41MR RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or screwed on the... |
$21.50 CLICK HERE for More Info or to Order
|
0 |
st92 |
|
|
This is the 45MR RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or screwed on the... |
$21.50 CLICK HERE for More Info or to Order
|
0 |
st93 |
|
|
This is the 45MR RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or screwed on the... |
$21.50 CLICK HERE for More Info or to Order
|
0 |
st74 |
|
|
This is the front site Winchester 1894 pre and post 64 and model 70. It is .260 high and fits onto the ramp on the Forearm of the barrel. (also fits... |
$21.50 CLICK HERE for More Info or to Order
|
0 |
st68 |
|
|
This is the front site Winchester 1894 pre and post 64 and model 70. It is .410 high and fits onto the ramp on the Forearm of the barrel. (also fits... |
$21.50 CLICK HERE for More Info or to Order
|
0 |
st28 |
|
|
This is the front site Winchester 1894 pre and post 64 and model 70. It is .343 high and fits onto the ramp on the Forearm of the barrel. (also fits... |
$21.50 CLICK HERE for More Info or to Order
|
0 |
c122 wop |
|
|
This is an ORIGINAL metal follower magazine on a Winchester model 94 POST 64 (the follower 357 and 450 marlin is different)It will also fit... |
$22.50 CLICK HERE for More Info or to Order |
2 |
c173-c |
Winchester Original Part |
|
This is an ORIGINAL STRIPPED locking bolt POST-64 Winchester TOP EJECT model 94. The DOES NOT come with the firing pin striker and firing pin... |
$23.00 CLICK HERE for More Info or to Order |
2 |
c139 |
|
|
This is the magazine stud Winchester model 94 post 64 |
$23.50 CLICK HERE for More Info or to Order
|
0 |
c154 |
|
|
This is an ORIGINAL cartridge guide FOR THE LEFT side of a Winchester model 94 POST 64 30-30 cal receiver. |
$24.00 CLICK HERE for More Info or to Order |
16 |
bp803 |
|
|
This NEW buttplate fits Winchester models 60, 61, 1910, 67, 67A, 69, 72 and 1904. It is a reproduction of an original buttplate made from... |
$24.25 CLICK HERE for More Info or to Order
|
0 |
wp400 wop |
Winchester Original Part |
|
Winchester 1 inch Rear sling swivel stud. For Models 70 pre 64, Model 100 and 770 This is a Winchester original Part Fits 1... |
$25.00 CLICK HERE for More Info or to Order |
9 |
st132-b wop |
|
|
This is the ORIGINAL RAMP STYLE front sight. Its width of .340 inches makes it a perfect fit for most ramps that are either soldered or... |
$25.50 CLICK HERE for More Info or to Order
|
0 |
c190 wop |
|
|
this is the spring that holds the safety bar into the lower tang on the Winchester model 94 POST 64. |
$26.00 CLICK HERE for More Info or to Order
|
0 |
bp810 wop |
|
|
ORIGINAL Buttplate for the Winchester Model 94 post-64 and Winchester model 12 in 28 gauge. This is an original buttplate, made from high quality... |
$26.25 CLICK HERE for More Info or to Order |
10 |
c182 |
|
|
This is the mainspring (also called hammer spring (mainspring)) Winchester 94 POST 64 rifle. It fits rifles with serial numbers 2,700,000-4,580,000.... |
$26.50 CLICK HERE for More Info or to Order
|
0 |
c128-a wop |
Winchester Original Part |
|
This is the extractor for all cals other than .357 magnum. It fits Winchester model 94 POST 64. (the .357 mag extractor is part number c113) this is... |
$27.25 CLICK HERE for More Info or to Order |
9 |
c171 |
|
|
This is the sear Winchester model 94 POST 64. it fits serial numbers 2,700,00 to 4,580,000 top eject. NOTE: angle ejects use a different shape sear... |
$27.50 CLICK HERE for More Info or to Order
|
0 |
wp217-c wop |
Winchester Original Part |
|
This is a stripped bolt Winchester 94 post 64 Angle Eject (AE). This bolt uses the short ejector. |
$28.00 CLICK HERE for More Info or to Order |
8 |
c127 |
Winchester Original Part |
|
This is the trigger stop spring that the hammer spring (mainspring) guide rod sits in and ontop of Winchester 94 POST 64. |
$28.45 CLICK HERE for More Info or to Order
|
0 |
st40 |
|
|
This is the hard to find elevator used rear sporting rifle sight on early production lever action rifles. Predominantly Winchester 1873 1866 1886.... |
$28.75 CLICK HERE for More Info or to Order |
51 |
st21 |
|
|
This is the front sight cover Winchester 1894 pre and post 64 models. They are blued and ready to install! (it is not the same as the model 70... |
$29.50 CLICK HERE for More Info or to Order
|
0 |
st23-a |
|
|
This is the highest 4-step rear sight elevator for lever action Winchester rifles. This elevator fits 1873, 1886, 1894 (pre and post 64) and 1895.... |
$30.00 CLICK HERE for More Info or to Order
|
0 |
st23-b |
|
|
This is the 4-step rear sight elevator lever action Winchester rifles. This elevator fits 1873, 1886, 1894 (pre and post 64) and 1895. Winchester... |
$30.25 CLICK HERE for More Info or to Order
|
0 |
st23-c |
|
|
This is the 4-step rear sight elevator lever action Winchester rifles. This elevator fits 1873, 1886, 1894 (pre and post 64) and 1895. Winchester... |
$31.75 CLICK HERE for More Info or to Order |
3 |
c178-b |
|
|
This is the ejector Winchester 94 POST 64 and for the 44 mag caliber. This ejector uses 2 ejector springs, unlike the other cal ejectors. |
$32.00 CLICK HERE for More Info or to Order |
1 |
wp276 wop |
Winchester Original Part |
|
This is the magazine plug Post-64 Winchester model 94. This plug fits into the Forearm of the outer magazine tube and is held in place by magazine... |
$32.00 CLICK HERE for More Info or to Order
|
0 |
wp285-a wop |
Winchester Original Part |
|
Mainspring ORIGINAL (also called hammer spring (mainspring) POST 64 Winchester 94 rifle. It fits rifles with serial numbers 2,700,000-4,580,000. The... |
$32.00 CLICK HERE for More Info or to Order
|
0 |
c156 |
Winchester Original Part |
|
This is the front sight ramp Winchester model 94 POST 64. This uses the screws part number C152 to attach it to the barrel. |
$32.00 CLICK HERE for More Info or to Order
|
0 |
c120 |
|
|
This is AN ORIGINAL magazine plug Winchester model 94 POST 64. This fits into the Forearm of the magazine tube and is held in place by magazine plug... |
$32.45 CLICK HERE for More Info or to Order |
2 |
c146 |
Winchester Original Part |
|
This is the lower tang Winchester 94 POST 64 ANGLE eject model. It is blued and does not come with any of the other components ie trigger, springs... |
$34.00 CLICK HERE for More Info or to Order |
6 |
st22 |
Winchester Original Part |
|
This is an ORIGINAL rear sight elevator lever action Winchesters. It fits 1873, 1886, 1894 (pre and post 64) and 1895. This is the 3C elevator... |
$34.55 CLICK HERE for More Info or to Order
|
0 |
wp217-b wop |
Winchester Original Part |
|
This is an ORIGINAL bolt Winchester 94 POST 64 TOP EJECT 30/30. STRIPPED . Need is the firing pin, extractor, extractor pin, ejector,... |
$35.00 CLICK HERE for More Info or to Order |
2 |
c201-a |
Winchester Original Part |
|
This is the ejector post 64 Winchester model 94 Angle eject series This is a LONG ejector , about 2 1/8 inch long . spring for it is... |
$35.00 CLICK HERE for More Info or to Order |
2 |
c201-b |
Winchester Original Part |
|
This is the ejector post 64 Winchester Model 94 Angle eject series with larger attachment arm on distal end. This is a LONG ejector ,... |
$35.00 CLICK HERE for More Info or to Order |
3 |
wp217G-a model94-E stripped wop |
Winchester Original Part |
|
This is the lower tang Winchester 94 POST 64 TOP eject rifle. It is an ORIGINAL REALLY NICE assembly Stripped of the TRIGGER, SAFETY BAR, and... |
$35.00 CLICK HERE for More Info or to Order |
1 |
c135 |
Winchester Original Part |
|
This is the forearm tenon Winchester 94 POST 64. It is also called the forearm cap bracket. This part slides into groove on underside of barrel and... |
$35.00 CLICK HERE for More Info or to Order
|
0 |
c195-a |
Winchester Original Part |
|
This is the LEFT cartridge guide Winchester model 94 POST 64 44 caliber magnum. |
$36.50 CLICK HERE for More Info or to Order
|
0 |
c195-b |
Winchester Original Part |
|
This is the RIGHT SIDE cartridge guide Winchester model 94 POST 64 44 caliber magnum. |
$36.50 CLICK HERE for More Info or to Order
|
0 |
wp193-b wop |
Winchester Original Part |
|
This is an ORIGINAL safety bar, also called the safety catch Winchester 1894-1873-1876 lever action rifles. This part sits down in the lower tang... |
$36.50 CLICK HERE for More Info or to Order |
6 |
mt9422-lr |
|
|
This is the inner magazine tube Winchester 9422, .22 cal S, L, LR lever action rifle. It fits outer tubes that are approx. 19 1/4 inches long. The... |
$36.65 CLICK HERE for More Info or to Order |
11 |
c175-a |
|
|
This is the Loading gate (spring cover), also called spring cover Winchester 94 POST 64 in.357 mag. It fits .357 mag angle eject above serial number... |
$37.50 CLICK HERE for More Info or to Order |
4 |
c199 |
Winchester Original Part |
|
This is an ORIGINAL complete locking bolt for a side eject POST-64 Winchester 94. The bolt comes with the firing pin striker and firing pin... |
$37.50 CLICK HERE for More Info or to Order |
9 |
c173-a |
Winchester Original Part |
|
This is an ORIGINAL complete locking bolt POST-64 top eject Winchester model 94. The bolt comes with the firing pin striker and firing pin striker... |
$37.50 CLICK HERE for More Info or to Order |
4 |
c174 |
|
|
This is the front barrel band Winchester model 94 post 64 with a nickel finish. It will also fit the pre 64 1894 and the 1892 rifle. Use screw wp63 |
$38.00 CLICK HERE for More Info or to Order
|
0 |
c187 |
|
|
This is the hammer Winchester 94 POST 64 rifle. It fits serial numbers above 4,580,000. The mainspring and sear set up are pictured below. |
$38.00 CLICK HERE for More Info or to Order
|
0 |