| Item Id |
Origin |
Product Image |
Item Name |
Price |
Quantity+ |
wp42 |
|
|
This is the forearm screw also called the action slide handle screw. This screw that fits the model 62 and 62A action slide handle (wooden pump... |
$3.85
CLICK HERE
for More Info
or to Order
|
0 |
wp610-a |
|
|
This is the dust cover (mortise cover) spring Winchester 1873. It is held in place by a screw (wp607A) in a rectangular cut out on the front of the... |
$11.75
CLICK HERE
for More Info
or to Order
|
0 |
wp46-a |
|
|
These BLUED plug screws fill the holes that were drilled scope on a model 70 Winchester receiver. They are also the screws Winchester PRE and POST 64... |
$2.75
CLICK HERE
for More Info
or to Order
|
0 |
c130 |
|
|
This is the tang screw (stock screw) Winchester 94 POST 64. This screw attaches the wood stock to the receiver. (the XTR takes a different tang screw) |
$4.15
CLICK HERE
for More Info
or to Order
|
0 |
c173-c |
Winchester Original Part |
|
This is an ORIGINAL STRIPPED locking bolt POST-64 Winchester TOP EJECT model 94. The DOES NOT come with the firing pin striker and firing pin... |
$23.00
CLICK HERE
for More Info
or to Order |
2 |
p125 |
|
|
This is the pin that holds the finger lever into the receiver of the Winchester 1873 rifles. This pin goes through the receiver and finger lever and... |
$3.50
CLICK HERE
for More Info
or to Order |
4 |
wp48-a |
|
|
Takedown (Assembly)replacement (NEW) screw for either a Winchester 1890 - 1906 - 62 - 62A pump 22 rifle. This secures receiver to the trigger... |
$22.45
CLICK HERE
for More Info
or to Order |
9 |
bp800 |
|
|
This is a white buttplate spacer that sits between the buttstock and the buttplate. On the option file below choose the size that closest matches... |
CLICK HERE
for More Info
or to Order |
9 |
wp607-a |
|
|
This little screw holds on the dust cover (mortise cover) SPRING (part number 610A) on the Winchester 1873 and 1876 lever action rifle. It sits in... |
$4.25
CLICK HERE
for More Info
or to Order |
11 |
wp56 |
|
|
This is the screw that attaches the forForearm cap (which holds your wooden forForearm/ foregrip onto the rifle) to the forForearm cap tenon. There... |
$3.75
CLICK HERE
for More Info
or to Order |
16 |
wp595 |
|
|
This is the wood swivel stud that screws into forearm on rifles to attach sling to. |
$4.50
CLICK HERE
for More Info
or to Order |
19 |
wp64-b |
|
|
This is the screw (short) that goes into the magazine plug on the Winchester 1873/1892/1894/1886/ 1866 and model 53 lever action rifles. If you have... |
$3.85
CLICK HERE
for More Info
or to Order |
20 |
c164 |
|
|
This is the screw that puts tension on the underside of the mainspring on your Winchester 94 POST 64 rifles. |
$4.25
CLICK HERE
for More Info
or to Order |
21 |
wp71-j |
|
|
This is the tang screw Winchester 1873 - 1892 - 1894 - 1895 and model 55, 53. It is longer than the normal tang screw and made to hold on the Lyman... |
$5.95
CLICK HERE
for More Info
or to Order |
21 |
wp613 |
|
|
This screw attaches the lower tang to the main receiver on the rifle. There is one screw on each side. On the 2nd model lower tang the... |
$3.25
CLICK HERE
for More Info
or to Order |
22 |
wp67 |
|
|
This is the tang screw (also called the stock bolt) which attaches the stock to the gun. This screw goes down through the upper tang behind the... |
$5.75
CLICK HERE
for More Info
or to Order |
23 |
wp64-b1 |
|
|
This is the screw that attaches the Spring brass trap door on the buttplate of the Winchester 1866, 1876 and 1873 lever action rifles. The... |
$4.50
CLICK HERE
for More Info
or to Order |
25 |
wp59-a |
|
|
This is the forearm screw Winchester model 70 (pre 64)It goes into the forearm stud part number |
$6.50
CLICK HERE
for More Info
or to Order |
26 |
wp20-a wop |
Winchester Original Part |
|
Hammer for 1890 and 1906 and 62 Winchester, Pump 22 rifles. Original Winchester manufacture. It is complete with the pin and stirrup that the main... |
$27.00
CLICK HERE
for More Info
or to Order |
29 |
wp1209 |
|
|
This is A NEW magazine plug screw Winchester model 12 all gauges |
$3.89
CLICK HERE
for More Info
or to Order |
31 |
wp30-a |
|
|
This is the Carrier lever SPRING for Winchester models 1890, 1906, 62 and 62A Winchester (and Rossi) .22 pump rifle. This spring sits on top of the... |
$10.75
CLICK HERE
for More Info
or to Order |
32 |
c100-b |
Winchester Original Part |
|
This is the link pin stop screw Winchester 94 POST 64. It fits rifles with serial number above 5,500,001, It also fits the model 9410 shotgun |
$5.50
CLICK HERE
for More Info
or to Order |
33 |
wp68 |
|
|
This is the screw that adjusts the tension on the hammer spring (mainspring) It is located in the middle of the lower tang. If your mainspring is... |
$3.00
CLICK HERE
for More Info
or to Order |
34 |
p111 |
|
|
This extractor pin is used on the Winchester models 1890, 1906, 62 and 62A. It goes in to0 the top of the bolt on the right side and down... |
$3.50
CLICK HERE
for More Info
or to Order |
36 |
p110 |
|
|
This is the tiny little pin that goes into the end of the assembly screw (take down screw) on the Winchester 1890 - 1906, mod 62 and also fits... |
$2.55
CLICK HERE
for More Info
or to Order |
37 |
wp769 |
|
|
This is the hard to find screw that holds the hammer in place on the Winchester model 1895. |
$5.50
CLICK HERE
for More Info
or to Order |
37 |
ms22 |
|
|
Spring that fits inside of the inner magazine tube on the Winchester 90 - 06 - 62 - 61 74. If you are able to get the magazine plug out by removing... |
$8.75
CLICK HERE
for More Info
or to Order |
37 |
p122 |
|
|
This is the pin that holds the trigger and sear in place on the Winchester model 1873 lower tang. Up to serial number 28,000 this pin was inside of... |
$3.25
CLICK HERE
for More Info
or to Order |
37 |
wp45 |
|
|
This small screw raises and lowers the original rear sight 30-B on the 1890 and 1906 Winchester pump 22. It screws in just in front of the V-notch on... |
$3.75
CLICK HERE
for More Info
or to Order |
38 |
wp106 |
|
|
This is the carrier Spring screw Winchester lever action model 1886 rifle. This screw hold on the carrier spring on the underside of the upper tang.... |
$4.25
CLICK HERE
for More Info
or to Order |
40 |
c100-a |
|
|
This is the finger lever pin stop screw Winchester model 94 POST 64. The tip of this screw does not have threads on the Forearm. This screw is on the... |
$4.50
CLICK HERE
for More Info
or to Order |
40 |
wp105 |
|
|
This is the screw used to hold the Loading gate (spring cover) on the Winchester 1886 and the Winchester model 71. This is also called... |
$5.75
CLICK HERE
for More Info
or to Order |
42 |
T757-steel |
|
|
This is a bag of ULTRA Fine high quality Steel wool. The quantity of what is seen in pic is what you will get. (approximately 2.5 oz.) Using ultra... |
$6.50
CLICK HERE
for More Info
or to Order |
45 |
wp605-a |
|
|
This is the screw that holds on the side plate on the Winchester 1873 3rd model. Serial number above 90,000 (thread is 3/16-36)If you have a 1st or... |
$6.95
CLICK HERE
for More Info
or to Order |
46 |
p124 |
|
|
This is the pin that holds the hammer in place on the Winchester model 1873 |
$4.05
CLICK HERE
for More Info
or to Order |
47 |
wp6 |
|
|
This saddle ring stud, screws directly into the left receiver side in any 1876, 1894, 1895, & 1886 saddle ring carbine. It can also be used on... |
$21.25
CLICK HERE
for More Info
or to Order |
52 |
st40 |
|
|
This is the hard to find elevator used rear sporting rifle sight on early production lever action rifles. Predominantly Winchester 1873 1866 1886.... |
$28.75
CLICK HERE
for More Info
or to Order |
54 |
wp5 |
|
|
This saddle ring fits into the saddle ring stud or the U-shaped staple on the side of the model 1866, 1876, 1873, 1892, 1894 and 1895 Winchester... |
$12.00
CLICK HERE
for More Info
or to Order |
58 |
c103-a |
Winchester Original Part |
|
This is the screw that holds on the front barrel band Winchester model 94 POST 64 carbine. The front band sits behind the front sight. NOTE if you... |
$4.05
CLICK HERE
for More Info
or to Order |
61 |
wp317-c wop |
|
|
Winchester 1900, 1902, 1904, 58, 99 and 36 stock stud screw escutcheon. This part sits in the wood stock where the stock stud (assembly screw) goes... |
$14.00
CLICK HERE
for More Info
or to Order |
64 |
wp108 |
|
|
this is the cartridge guide screw Winchester 1886 lever action rifle. Will also fit the model 71 This screw holds on the cartridge guide on to the... |
$3.00
CLICK HERE
for More Info
or to Order |
68 |
ms73 |
|
|
This is a NEW magazine spring for the Winchester 1866/1873/1894/ 1892 rifle. It fits the .38 and .44 cal in the 1873 and 1892 models. This... |
$10.75
CLICK HERE
for More Info
or to Order |
68 |
bp882-b |
|
|
This is the LARGE buttplate for Winchester models 21 and 101 in 12 gauge. It is a reproduction of an original buttplate made from high quality... |
$21.25
CLICK HERE
for More Info
or to Order |
69 |
wp759 |
|
|
This is the screw that holds the carrier in place on the Winchester model 1895 |
$5.25
CLICK HERE
for More Info
or to Order |
74 |
c101-a |
Winchester Original Part |
|
This is the screw that holds on the rear barrel band on the Winchester model 94 POST 64 carbine rifle. It goes through the wooden forearm. NOTE ir... |
$4.25
CLICK HERE
for More Info
or to Order |
76 |
wp46-b |
|
|
This is a STAINLESS STEEL plug screw 8-40 thread. These screws DO HAVE a little head on them and will not screw all the way through the receiver.... |
$3.75
CLICK HERE
for More Info
or to Order |
76 |
set94post-c |
|
|
This is a discounted external screw set Winchester model 94 POST 64 Top eject Carbine. Your serial number should be from approximately 2,700,000 -... |
$55.75
CLICK HERE
for More Info
or to Order |
78 |
wp22-a |
|
|
Escutcheon for 1890 and 1906 Winchester pump handle. This part is blued metal. This will fit directly into the forearm and will keep the pump handle... |
$3.55
CLICK HERE
for More Info
or to Order |
80 |
wp603-a |
|
|
This is the screw that holds on the finger lever on the Winchester 1873 rifle. It goes through the left side of the receiver below the sideplate and... |
$5.25
CLICK HERE
for More Info
or to Order |
83 |
j314 |
|
|
This is the screw that holds the grips on to each side of the Jimenez .380, .22 and .25 cal pistol. It is also Bryco - Jennings 22, 25, 38 models.... |
$2.25
CLICK HERE
for More Info
or to Order |
88 |
wp71-h |
|
|
This is the cartridge guide screw Winchester 1894 and model 64 and model 55. |
$3.75
CLICK HERE
for More Info
or to Order |
90 |
wp580 |
|
|
This is the front guard screw Winchester model 70 pre 64. Also called the magazine cover hinge polate screw. |
$4.00
CLICK HERE
for More Info
or to Order |
96 |
wp579 |
|
|
This is the rear guard screw Winchester model 70 pre 64. |
$4.80
CLICK HERE
for More Info
or to Order |
97 |
wp43 |
|
|
Action slide handle (Forearm) screw for Winchester 1890 pump 22. This screw will fit all three models (1st 2nd and 3rd) of the 1890 and all 1906... |
$3.85
CLICK HERE
for More Info
or to Order |
98 |
wp578 |
|
|
This is the middle guard screw Winchester model 70 pre 64. |
$4.00
CLICK HERE
for More Info
or to Order |
98 |
wp71-i |
|
|
This is the screw that holds on the front of the Lyman and Marbles tang sight. It goes into the front hole (where the stock screw goes into the rear... |
$3.75
CLICK HERE
for More Info
or to Order |
110 |
c163 |
|
|
This is the link screw Winchester model 94 POST 64. It fits top eject and angle eject below serial number 5,550,001 |
$4.25
CLICK HERE
for More Info
or to Order |
117 |
wp789 |
|
|
This is the screw that holds on the sideplate Winchester 1876 lever action rifle |
$4.75
CLICK HERE
for More Info
or to Order |
117 |
c121 |
|
|
This is the magazine plug screw that goes through the magazine tube and holds in the magazine plug (part number C120) in place on the Winchester... |
$4.75
CLICK HERE
for More Info
or to Order |
144 |
c105-a |
Winchester Original Part |
|
This is the carrier spring screw Winchester model 94 POST 64. This holds the carrier spring (part number C117 or C143) to the receiver. |
$5.50
CLICK HERE
for More Info
or to Order |
149 |
c102-a |
Winchester Original Part |
|
This is the carrier screw Winchester model 94 POST 64. Also fits the 94 lever shotgun model 9410 |
$4.50
CLICK HERE
for More Info
or to Order |
158 |
wp786 |
|
|
The hammer screw holds the hammer in place on the very early model 1873 rifles (up to ~ 89,000 serial number). This screw goes through the frame and... |
$5.75
CLICK HERE
for More Info
or to Order |
161 |
c147 |
Winchester Original Part |
|
This is the screw that holds the hammer in place on the Winchester model 94 POST 64 |
$4.25
CLICK HERE
for More Info
or to Order |
169 |
c104-a |
Winchester Original Part |
|
This is the screw that attaches the Loading gate (spring cover) to the receiver of the Winchester model 94 POST 64. It is used with all... |
$4.25
CLICK HERE
for More Info
or to Order |
189 |
wp626-a |
|
|
NEWLY ARRIVED! This is the wood screw lower tang on the Winchester 1866, 1873, 1876, 1886 and model 1885 rifle. It is located at the very back of the... |
$6.25
CLICK HERE
for More Info
or to Order |
190 |
wp71-d |
|
|
This screw fits the Winchester model 1894, 65, 55, 53, 65. The 1894 the finger lever pin stop screw hole is 1 9/16 inches behind the front of the... |
$4.15
CLICK HERE
for More Info
or to Order |
200 |
wp71-e |
|
|
Fits models 1894,64, 55 Winchester. This screw joins the finger lever to the link. (make sure when installing the head sits down in the counterbore... |
$4.00
CLICK HERE
for More Info
or to Order |
222 |
wp604-a |
|
|
This screw secures the finger lever spring and the carrier lever spring to the bottom of the receiver behind the brass carrier Winchester model 1866,... |
$4.00
CLICK HERE
for More Info
or to Order |
231 |
wp63 |
|
|
This is the screw that holds on the front barrel band on the model 1894 and 1892 carbine Winchesters. The front band is the figure 8 shape band that... |
$4.05
CLICK HERE
for More Info
or to Order |
242 |
wp617-a |
|
|
This is the screw dust cover stop on the Winchester 1873 and 1876 second and third model rifle. This screw holds the dustcover stop, part number... |
$4.00
CLICK HERE
for More Info
or to Order |
251 |
wp71-k |
|
|
This is the hammer screw Winchester model 1892 and 1894 and model 64 and model 55 . The hammer screw goes through the left side of the receiver... |
$4.75
CLICK HERE
for More Info
or to Order |
255 |
wp52 |
|
|
This is the cartridge guide screw Winchester lever action model 1892, it will also fit models 65 and 53. This screw goes through the side of the... |
$3.85
CLICK HERE
for More Info
or to Order |
268 |
wp44 |
|
|
This screw fits Winchester model 1892 - 1894 - 64 - 65 - 55 - 53. It is used to adjust the tension on the hammerspring (mainspring). This screw... |
$3.75
CLICK HERE
for More Info
or to Order |
268 |
wp71-a |
|
|
This carrier screw fits Winchester models 92/94/64/55. Only the center portion of the shank is threaded. The unthreaded portion projects into a hole... |
$4.00
CLICK HERE
for More Info
or to Order |
279 |
wp49 |
|
|
Screw that holds side plate in place on 1890 and 1906 Winchester pump .22 rifles. This part fits model 90 or model 06 or 62A |
$3.85
CLICK HERE
for More Info
or to Order |
291 |
wp71-g |
|
|
This is the link pin stop screw Winchester 1894 lever actin rifle and model 64 and model 55 . The tip of this screw presses into the groove on the... |
$4.25
CLICK HERE
for More Info
or to Order |
297 |
wp723 pin |
|
|
This is the pin the holds the magazine tight against the rear Magazine Hanger (magazine ring). It slides into a hole in the base of the rear mag... |
$2.25
CLICK HERE
for More Info
or to Order |
320 |
wp58 |
|
|
This screw provides tension to the main spring (hammer spring (mainspring)) resulting in more pressure when the hammer strikes the firing pin when... |
$3.85
CLICK HERE
for More Info
or to Order |
329 |
wp64-a |
|
|
This is the screw (long) that goes into the magazine plug on the Winchester 1866, 1873, 1892, 1894 lever action rifles, and model 53. This screw goes... |
$4.25
CLICK HERE
for More Info
or to Order |
331 |
wp50 |
|
|
This is the trigger spring SCREW (Sear spring) - that fits the Winchester 1866, 1873, 1886, 1894, 1892, models 53, and 65. Also the 1890 1906 62 and... |
$3.85
CLICK HERE
for More Info
or to Order |
369 |
st67 |
|
|
This is the type 2 sight elevator, also called sight step, Winchester .22 rifles. This elevator is blued. The highest adjustment point is .150... |
$10.75
CLICK HERE
for More Info
or to Order |
377 |
wp57 |
|
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.95
CLICK HERE
for More Info
or to Order |
773 |
