Stevens Original Part

PIN for the Breech Block Plunger on a Stevens Model 11 Rifle in 22 caliber 

PIN for an Extractor -- for the Stevens Model 11 Rifle in 22 caliber 

Extractor Plunger Spring Stevens model 70 ORIGINAL

Mainspring PLUNGER pin or a Stevens Model 11 Rifle in 22 caliber ORIGINAL

Spring for plunger on a finger lever (extractor) for Stevens Favorite. This is an ORIGINAL part.

Hammer Screw on a Stevens Maynard Jr ORIGINAL

Pin for Mainspring Plunger Stevens Little Scout. This ORIGINAL Stevens part holds the mainspring plunger and is attached to the lower hammer.

Barrel STUD  for the Stevens Model 15 bolt action single shot rifle.  

PIN that holds the Firing pin in place on the Stevens LittleScout. This is an ORIGINAL Stevens part.

Plunger that holds the trigger Plunger spring in place on a Stevens Little Scout. This is an ORIGINAL part.

Trigger spring Screw Stevens model model 70. This is an ORIGINAL part.

Action Pin Screw for Stevens model 70 ORIGINAL

Trigger Spring ORIGINAL for a Stevens Marksman 12 and Model 101.  Also fits little scout and  late Stevens Favorite triggers 

This is an original Hammer Lock SCREW Stevens model 70. Ths little screw threads into the hammer nut (looks like a long bushing that is threaded on...

Finger Lever Plunger model 44 Stevens. This is an ORIGINAL Stevens part.

PIN for the Hammer onr the Stevens Model 11 Rifle in 22 caliber ORIGINAL   This pin goes through the receiver and holds the hammer in place.

Breech Block SCREW for the Stevens Model 11 Rifle in 22 caliber 

Pin to hold the link in place on a Stevens Maynard Jr; ORIGINAL part.

Escutcheon for forearm (SLIDE HANDLE) Screw ORIGINAL Stevens model 70

Escutcheon forearm screw on a Stevens Favorite rifle.

Screw for securing the Mainspring of a Stevens 16 Crackshot ORIGINAL

Trigger Screw for securing the Trigger of a Stevens Little Scout ORIGINAL

Extractor Screw (2) Stevens model 70

Take-down screw ORIGINAL for the Stevens Model 15 bolt action single shot rifle.  

Finger Guard rear bolt (screw) Stevens Little Scout ORIGINAL

Screw ORIGINAL for the Hammer on a Stevens Favorite

Trigger SCREW for a Stevens Marksman 12 and 101.  Also fits little scout and  late Stevens Favorite  triggers ORIGINAL

Hammer Screw Stevens model 44 rolling block rifle.

ORIGINAL Trigger PIBN Stevens Model A Target.  This pin holds the trigger into the middle of the receiver.

Screw Breech Block on a Stevens LittleScout. This is an ORIGINAL part.

Trigger ORIGINAL for the Stevens Model 15 bolt action single shot rifle.  

Screw for securing the Mainspring of a Stevens Favorite ORIGINAL

Plunger for the Finger Lever (extractor) on a Stevens Favorite. This is an ORIGINAL part.

Stock Bolt Nut on a Stevens Favorite ORIGINAL

Extractor SPRING for the Stevens Little Krag ORIGINAL

ORIGINAL Screws Stevens LittleScout buttplate. These screws are placed from top of plate to middle of top screw hole is 1/2 and from bottom of plate...

Screw ORIGINALfor the Breech Block on a Stevens Ideal. This part screws through the receiver and holds the breech-block in place. Condition...

Receiver (frame)  SCREW for the Stevens Model 11 Rifle in 22 caliber - ORIGINAL  

Screw to hold the link in place on a Stevens Maynard Jr; ORIGINAL part.

SCREW for the Finger Lever Stevens Crackshot. This is ORIGINAL and holds the Finger Lever in place on the Crackshot.

Mainspring Screw Stevens model 70 ORIGINAL.  This part also was used in the late Stevens Favorite rifles (e.g., Model 1915 Favorites)

An ORIGINAL Breech Block PIN for the Stevens Crack Shot 26 this pin holds the breechblock into the FINGER LEVER.

Extractor Pin ORIGINAL Stevens Little Scout. ORIGINAL Stevens part that fits onto the lower barrel.

Spring for the Hammer Block Lever on a  Stevens Model 70.  This is an   ORIGINAL  Stevens part.

ORIGINAL Mainspring Stevens LittleScout and also fits the later 14 1/2 LittleScout model.

Mainspring ORIGINAL for Stevens Marksman 12 and 101 rifles.

Trigger SCREWM Stevens No. 41, 42, 43 Tip-up Pistols ORIGINAL

ORIGINAL Hammer PIN Stevens Model A Target

Barrel PIN for a Marlin Model 100 ORIGINAL  This will also fit the Ranger Model 103-8 rifle.

PIN  for the Extractor and Bar on a Stevens No. 41, 42, or 43 Tip-up Pistols ORIGINAL Stevens Part.

PIN for the Link on a Stevens Marksman 12 and 101 rifle ORIGINAL part

Mainspring for a Stevens Model 11 Rifle in 22 caliber ORIGINAL

Mainspring SLEEVE for a Stevens Model 11 Rifle in 22 caliber ORIGINAL

Trigger Guard SCREW for a Stevens Model 11 Rifle in 22 caliber ORIGINAL

Hammer Dummy Screw Stevens model 70 ORIGINAL

Extractor Plunger ORIGINAL Stevens Little Scout 14 1/2. This is an ORIGINAL part 22 rifle.

Screw for Forearm ORIGINAL on a Stevens Ideal (Model 44).  The screw fits Favorite models with straight forearm wood. This screw holds the...

Sear for the Stevens Model 15 bolt action single shot rifle.  

Firing Pin SCREW for a Stevens No. 41, 42, 43 Tip-up Pistol ORIGINAL

Stock (handle grip) SCREW Stevens No. 41, 42, 43 Tip-up Pistols ORIGINAL  This screw holds a side of the wooden handle grips to the metal...

An ORIGINAL Trigger/Sear Spring SCREW for the Stevens Tip up rifle .

An ORIGINAL Buttplate SCREW for the Swiss style buttplate on the Stevens Tip up rifle.

Finger lever PLUNGER for Stevens Favorite 1915 late production rifle.  This is for the .25-32 caliber guns.

Forearm SCREW that holds the forearm wood onto the Stevens Marksman 22 rifle. This is an ORIGINAL part in EXCELLENT condition. 

ORIGINAL Mainspring Stevens Model A Target.  This is spring part that fits around the plunger.