Winchester Original Part

These are new old stock carrier springs for the Winchester mod 50 and 59 Shotgun

Magazine Plug Winchester 1200 and 1300 Shotgun 12 gauge

Breech bolt retaining lever pin Winchester 1897 (1216a)

Hammer Stirrup Pin -ORIGINAL- Winchester 1897

This is the PIN that holds the Firing Pin Spring in place on the model 37 Winchester Shotgun.

Cartridge Guide Pin Winchester 74 ORIGINAL

extractor pin left hand model 12 Winchester bolt

Extractor Spring ORIGINAL Winchester model 72. Two springs are required, one for left and one for right extractors.

Hammer Pin Winchester 12

Magazine catch screw ORIGINAL Winchester model 69 and 69A.  This pair of screws hold the Magazine Holder attached to the receiver

Magazine Throat Pin ORIGINAL Winchester model 74

Safety Lock Spring Winchester model 74 ORIGINAL

Takedown screw lock plunger spring ORIGINAL model 1903 and early 63 Winchester semiautomatic rifles.

PiIN for the Trigger Base ORIGINAL Winchester Model 72

Trigger Pin Winchester model 63 - 1903. This in goes through the trigger guard and secures the trigger in place.

This is an ORIGINAL trigger spring screw (Sear spring) - that fits the Winchester 1866, 1873, 1886, 1894, 1892, models 53, and 65. Also the 1890 1906...

Firing Pin Connecting pin ORIGINAL model 37 Winchester Shotgun. This is the pin that goes through the Forearm of the firing pin, connecting the...

Lock Pin ORIGINAL model 37 Winchester in 12/16 gauge

Lock Pin ORIGINAL model 37 Winchester .410 gauge single-shot shotgun.

Lock Spring ORIGINAL model 37 Winchester single-shot shotgun. This spring fits ALL gauges of the model 37 shotgun.

Breech Bolt STOP Plunger SPRING for a Model 70 Pre-64 Winchester Model 70 rifle.  The is an ORIGINAL Winchester part.

Cartridge Guide Rivet Winchester 1897

Firing Pin Guide Pin Winchester Model 52

Magazine (Carrier) Throat Pin ORIGINAL Winchester model 72

Trigger guard screw Winchester 1897

Trigger Stop Screw Model 70 Winchester ORIGINAL

Cocking Lever Pin ORIGINAL for 12/16 gauge Winchester model 37 shotguns

Cartridge Cutoff Pin Winchester 1903 ORIGINAL

Cartridge Stop Screw Right (New Style) Winchester 1897

This is an ORIGINAL pin that fits into the bolt holding the extractor in on the 1890, 1906 62 62A Winchester pump .22

This is the pin that holds the firing pin striker in place on the Winchester model 94 POST 64

This is the pin that hold the hammer spring (mainspring) guide rod in place.

This is the upper tang plug screw Winchester model 94 POST 64. It fills the hole behind the hammer where you would put the front screw tang mounted...

This is the carrier plunger pin Winchester model 61

This is the pin that holds the ejector in on the Winchester model 61

Adjusting sleeve lock screw Winchester 1897

Extractor SPRING for a Model 94 EXCELLENT condition for 12 Gauge ORIGINAL

Extractor Spring Left Winchester Model 52

This is the pin that attaches the outer magazine tube to the receiver in a 1903 Winchester semiautomatic rifle.

An ORIGINAL trigger SPRING for the model 69a Winchester 22 bolt action rifle .  This spring fits into hole on the underside of the trigger.

Carrier Plunger spring Winchester model 12

ORIGINAL Screw that holds the safety bar into the lower tang

Sear Pin Winchester 1897

Winchester model 67 firing pin head pin

Pin that holds the Winchester 1903 and Model 63 hammer spring abutment into the receiver

Breech Bolt Arm (handle) Locking Plunger SPRING Winchester Model 52

Extractor (ejector) started PIN Savage Model 94 ORIGINAL

Extractor Stop PIN Savage Model 94 ORIGINAL

Safety Lock Plunger SPRING Model 70 Winchester ORIGINAL

This is the screw that holds on the front barrel band Winchester model 94 POST 64 carbine. The front band sits behind the front sight. NOTE if you...

Hammer Spring Guide Rod PIN Winchester Model 88 ORIGINAL

Slave PIN for repplacing the hammer- and-rear link pins during disassembly of the Winchester Model 88 ORIGINAL

This is the screw that holds on the rear barrel band on the Winchester model 94 POST 64 carbine rifle. It goes through the wooden forearm. NOTE ir...

Extractor PLUNGER Right Winchester 1897

This is the  Rolled pin that attaches the finger lever to the link (part on under side of receiver) on the Winchester 94 POST 64. This is not...

Firingpin Lock spring Winchester 1897

This is the pin that hold the hammer in place on the Winchester model 61

This is the screw that attaches the Loading gate (spring cover) to the receiver of the Winchester model 94 POST 64. It is used with all...

ORIGINAL Operating Sleeve Tip pin Winchester 163

This is the washer that goes infront of the stock bolt on the Winchester model 63

Spring that puts tension on the carrier plunger Winchester model 61

Guard latch spring Winchester Model 88 ORIGINAL

Trigger Spring ORIGINAL for all model 37 Winchester shotguns. This small spring fits between the spring guide rod stop and the trigger.

Cartridge guide pin rivet  Winchester 12

This is the retaining screw(s) that hold the extracor in place on the Winchester 94 POST 64.