Winchester Original Part

Lock Spring ORIGINAL model 37 Winchester single-shot shotgun. This spring fits ALL gauges of the model 37 shotgun.

Lock Pin ORIGINAL model 37 Winchester 20 or 28 gauge single-shot shotgun.

Lock ORIGINAL model 37 Winchester .410 gauge single-shot shotgun.

Lock ORIGINAL 37 Winchester 12 gauge shotgun.

This is the ORIGINAL breech bolt (stripped) first and early second model Winchester 1890 pump 22 rifles. It is the early style first and second...

Knock-off Stop Pin ORIGINAL Winchester 1885 Low Wall rifle. This round pin stops the knock-off from over rotating, and the pin has the middle on one...

A NEW reproduction Lower tang Screw Winchester 1885 High Wall

Knock-off operating pin ORIGINAL Winchester 1885 rifle

Ejector Hammer Sear No. 9 for the 1885 Winchester High Wall. 

Ejector Hammer Sear No. 6 for an 1885 Winchester High Wall. This fits 38-40 (38WCF) guns as well as the 44-40 caliber. For Barrel weights up...

ForForearm (forearm) Stud ORIGINAL Winchester 1885 High Wall rifle.

Trigger ORIGINAL Winchester 1885 high wall rifle

Knock-off Spring ORIGINAL Winchester 1885 rifle

Knock-off Spring pin ORIGINAL Winchester 1885 rifle

Tang ORIGINAL Winchester 1885 rifle

Finger Lever Pin ORIGINAL Winchester 1885 rifle

This is the breech bolt 1890, 1906. It will also fit the model 62 Winchester pump .22 rifle. This is a bolt 3rd model 1890. See the picture below...

Extractor or an 1885 Winchester High Wall. This fits 32-40 (32WCF)guns as well as the 32 IDEAL. For Barrel weights up through No. 2.

Lever Link Pin long ORIGINAL Winchester 1885 rifle

Hammer Pin ORIGINAL Winchester 1885 rifle. This is a split pin version 1885 High Wall single shot rifle.

Hammer ORIGINAL small caliber Winchester Low Wall 1885 rifle. The cur-out region indicates a later production period.

Breechblock ORIGINAL High Wall Winchester 1885 large caliber rifle.

Firing pin stop pin (screw) ORIGINAL 22 caliber Winchester 1885 rifle

Sear Spring SCREW ORIGINAL Winchester 1885 rifle

Sear Pin ORIGINAL Winchester 1885. This is the long pin that goes through the top of the receiver and holds the Sear in place.

Sear ORIGINAL Winchester 1885 high wall rifle

Mainspring ORIGINAL Winchester 1885 high wall rifle

Upper tang plug screw for an 1885 Winchester - this is an ORIGINAL Winchester part. This is a dummy-screw, just holding the opening upper tang sight...

Breech bolt for the Winchester 1873 in 32-20 caliber. It is COMPLETE and has the extractor and pin (wp619-a and p118). This is an original...

This is a ORIGINAL hammer That fits on the Winchester model 1866 and the 1873 lever action rifles. These are NOT reproductions so the finish...

This is an ORIGINAL carrier lever Winchester 1873 lever action rifle. This is the part that fits into the brass carrier and lifts it up and down. The...

This is an ORIGINAL ejector stop PIN Winchester 1894 (pre 64). The ejector stop pin hole is 3/64 inches behind the front of the ejector. The pin is...

This is an ORIGINAL ejector Winchester 1894 (pre 64) lever action rifle. This part fits all caliber rifles. It sits on the underside of the bolt, is...

Right Toggle Link for Winchester 1866.  Hard to find new part for the 1866

This is a NEW OLD STOCK   86 hammer. That fits on the Winchester model 1886 lever action rifle and carbine. Case harden fininsh  ...

This is the part on the Winchester 1895 that (unlike model94) does not fully block the rear of the breechbolt. It slides up into milled section on...

This is an ORIGINAL part - the RIGHT cartridge guide for a Winchester 1892 in 25-20 or 32 WCF cal lever action rifles.  The screw that holds...

This is the  ORIGINAL  RIGHT cartridge guide Winchester 1892 for the 38 and 44 cal lever-action rifle. The screw that holds the cartridge...

This is the LEFT cartridge guide Winchester 1892 38 and 44 cal lever action rifle. The screw that holds the cartridge guide spring (part number 753)...

Spring for the firing pin on the Winchester model 63 and 1903 .22 cal rifles. 

This is an ORIGINAL magazine plug taken from the Winchester model 1894. Winchester started using this plug on the 94's around serial number...

This is an ORIGINAL magazine plug forthe Winchester Model 1886 rifle. This plug has a tapped hole magazine plug screw and has a lip that fits into...

This is AN ORIGINAL  carrier spring Winchester model 1886. It is located on the underside of the upper tang and put pressure on the carrier to...

Winchester 1876 ORIGINAL hammer.  The Hammer is case hardened and still has abudant color.  Notches in base still with crisp edges and...

This is an ORIGINAL  extractor Winchester for the 1886 lever-action rifle. It sits on top of the bolt and fits all calibers.

This is the LEFT side ORIGINAL Locking bolt Winchester 1892 lever action rifle. This part sits in grooves in the receiver on the left side (non...

This is an original carrier SMALL caliber 25-20, 32-20 ect Winchester 1892. It is complete with the carrier stop, spring and pin. Ready to install.

This is an ORIGINAL cartridge stop Winchester 1886 lever action rifle and model 71. It fits all calibers and attaches to the receiver wall with...

This is an ORIGINAL forearm tip (Forearm cap) for a pre 64 Winchester 1892.  The cap fits the small calibers, .25,.20,.32, etc....

This is the hard to find ORIGINAL carrier LARGE caliber 38-40 44-40 in the Winchester 1892. It is complete with the carrier stop, spring and pin....

Bolt COMPLETE Winchester 1902,  This ORIGINAL bolt contains the firing pin, cocking knob, and firing pin spring, all held in place by two...

Carrier Hook Winchester 1886 ORIGINAL part

Tenon ORIGINAL holds on the Forearm cap and fits the Winchester 1873, Winchester 1866, 1873,1892, and 1894. This is an ORIGINAL Winchester part...

This is the forForearm tip Winchester model 63 and 1903 rifles. This is the plastic tip that holds the forearm wood onto the rifle.

This is an ORIGINAL Screw Loading gate (spring cover) on the 2nd and 3rd model Winchester 1873. The bluing varies being that these are ORIGINAL parts.

This is an original Magazine plug for inner magazine tube. Fits models 90 - 06, 62A 61 and 72.  This plug is blued and knurled but, and...

Sear SPRING Model 70 Winchester ORIGINAL

Sear Model 70 Winchester ORIGINAL

This is a new operating sleeve spring Winchester model 63 and model 1903. It fits into the operating sleeve and around the bolt guide rod.

This is a ORIGINAL  ejector  FOR Winchester 1892 large caliber . Final fitting  may  required. The ejector spring...

This is the operating sleeve Winchester model 63 and 1903. (Note that the tip and pin tip are different between the 63 and 1903 Winchester models)

This is the bushing that the takedown screw goes through on the Winchester model 63 and 1903 rifle.

This is AN ORIGINAL abutment for the Winchester model 63 and also fits the 1903 Winchester.  This piece holds  the hammer spring...

This is tan ORIGINAL flat trigger spring Winchester model 1886. This spring sits inside the lower tang and puts tension on the trigger. It is...

This is a Magazine Plug only for  small caliber 1892 Winchester Take downm model .  Does not contain lever and screws.  Original...