Winchester Original Part

ORIGINAL LOCKING BLOCK ASSEMBLY for WINCHESTER Model 11  complete with Locking block and locking block operating rod and pin.

This is an ORIGINAL locking bolt for the pre 64 Winchester 1894 and Model 64 and Model 55 . It is .005 oversized to compensate for excessive...

Locking Bolt Assembly COMPLETE with Cartridge Stop and two pins, for the early (before serial number 70,000) Winchester 1895.  THIS FITS IN...

Locking Bolt Assembly COMPLETE with Cartridge Stop and two pins, for the LATE (usually AFTER serial number 70,000) Winchester 1895.  THIS FITS...

This is the ORIGINAL locking bolt Winchester 1894, model 64 and 55 lever action rifles. This part moves up behind the bolt to lock it in battery....

This is an ORIGINAL complete locking bolt POST-64 top eject Winchester model 94. The bolt comes with the firing pin striker and firing pin striker...

This is the LEFT side ORIGINAL Locking bolt Winchester 1892 lever action rifle. This part sits in grooves in the receiver on the left side (non...

This is an ORIGINAL locking bolt pin stop screw Winchester 1892, 65 and model 53. It secures the locking bolt pin in place to prevent it from backing...

This is the RIGHT side locking bolt Winchester 1886 rifle and model 71 ORIGINAL. Both Left and Right sides lock the breech bolt into firing position.

This is an ORIGINAL STRIPPED locking bolt POST-64 Winchester TOP EJECT model 94. The DOES NOT come with the firing pin striker and firing pin...

Lower Barrel Band PIN for a Winchester 1895 Lee Straight Pull rifle ORIGINAL

Lower Barrel Band for a Winchester 1895 Lee Straight Pull rifle ORIGINAL

Lower Tang Screw ORIGINAL Winchester 1885 rifle. Bluing on metal varies. All screw threads clean and sharp.

This is the lower tang Winchester 94 POST 64 TOP eject rifle. It is an ORIGINAL REALLY NICE assembly that has been stripped.    

Magazine (Carrier) Throat Bushing ORIGINAL Winchester model 72

This is an ORIGINAL  10-round  magazine Winchester for the Model 69 and 69A also models 52, 56 and 57. It is almost impossible to...

This is an ORIGINAL magazine band Winchester model 12,   16 gauge.

Magazine band bushing --16 ga-- Winchester 1897 ORIGINAL PART

Magazine band ORIGINAL --12 ga-- Winchester 12

These are ORIGINAL Magazine band bushing screws --for the 12g-- Winchester 1897 shotgun.  All threads in excellent condition.

Magazine BOX Winchester Model 70 pre-64 ORIGINAL.  This slides into middle of stock  to directly about the floor plate for 30-06...

Magazine Cap Winchester 1200 and 1300 Shotgun 12 gauge

Magazine catch ORIGINAL Winchester model 69 & 69A. This parts sits on the magazine holder part number wp345-b and is held in place by screw 345-a

Steel Metal Magazine Floor-plate (Cover) Hinge Plate PIN for the post-64 Winchester Model 70 ORIGINAL.  This holds the hinge plate to the...

Metal Aluminum Magazine Floor-plate (Cover) fior the post-64 Winchester Model 70 ORIGINAL.  Solid construction in very good condition.

Follower ORIGINAL for 38&44-40 Winchester 1873

This is an ORIGINAL magazine follower 12 gauge Winchester model 12.

Follower  for the 12 gauge Winchester 1897 pump shotgun.  This is an ORIGINAL Winchester part.

This is an ORIGINAL magazine follower Winchester 1892 and 1894 (all cals in 1894, large cals- .38, .44 in the 1892). This follower can also be used...

This is an ORIGINAL older MACHINED style magazine follower for the Winchester model 1886 and model 71 lever action rifle.

This is an ORIGINAL magazine follower for the Winchester  Model 1890, 1906, 61 62 62A that fits into the inner magazine tube. It will work for...

Friction Spring ORIGINAL for 1903 outer magazine tube

This an ORIGINAL hanger that attaches to the underside of the barrel on the Winchester 1873 and 1892 rifle (or carbine) in 25-20 or 32-20 cal. This...

Magazine Hanger (magazine ring) ORIGINAL for 32-20 Winchester 1873.  The pin that goes through this hanger is part wp726 pin.

This is an ORIGINAL Front Magazine Hanger (magazine ring) for 1890 and 1906, 61 and 62 Winchester pump .22 rifles. It does NOT have a slot magazine...

This ORIGINAL magazine ring (also called hanger) Winchester model 1886 lever action. This ring is unique to the 1886 and has a larger inside and...

Magazine Holder ORIGINAL Winchester model 69 and 69A

Magazine Lock SPRING Winchester Model 88 ORIGINAL

Magazine locking pin spring. This spring fits into either the model 1897 or model 12 shotgun magazine locking pin.

Magazine locking pin, takedown --16 ga-- Winchester 1897

This is the pin that attaches the outer magazine tube to the receiver in a 1903 Winchester semiautomatic rifle.

Magazine Plate ORIGINAL Winchester model 69 and 69a

This is an ORIGINAL magazine plug ROUNDED for the Winchester 1873 1892 and 1894 .38 and .44 cal rifles that have the 1/2 AND 3/4 inch length magazine...

This is an ORIGINAL magazine plug Winchester model 1886 rifle. This plug has a tapped hole long magazine plug screw (part number 713B) and has NO LIP...

This is an ORIGINAL 1894 magazine plug, that is slotted and takes the earlier short magazine plug screw. It has NO LIP and will fit Winchester...

This is a Magazine Plug 38-40 & 44-40 caliber Winchester 1873 rifles. This magazine plug has a lip which locks into the underside of the barrel.

This is an original magazine plug Winchester model 12 in 16 and 20 gauge.

This is the pin that holds in the magazine plug to the inner mag tube Winchester model 63

This is an original stop magazine plug on a Winchester model 12, 12 gauge. This is stamped with a 12 on the inside tab.

This is an original stop magazine plug on a Winchester model 12, 20 gauge

Magazine plug stop --12 ga-- Winchester 1897

This is the magazine plug Post-64 Winchester model 94. This plug fits into the Forearm of the outer magazine tube and is held in place by magazine...

This is an ORIGINAL magazine plug forthe Winchester Model 1886 rifle. This plug has a tapped hole magazine plug screw and has a lip that fits into...

Magazine Release Plunger ESCUTCHEON Winchester 69 and 69A ORIGINAL

Magazine Release Plunger STOP Winchester 69 and 69A ORIGINAL

This is the magazine spring Winchester 94 POST 64. This spring is ORIGINAL factory It is for all cals

This is an ORIGINAL  magazine spring Winchester 1873, 1892 rifle and Marlin rifles. It fits the 25-20 and 32-20, .218 bee cal. magazine...

This is the larger magazine spring for Winchester model 70 (pre 64) in cals, 30-06, 375 Hand H mag, 270, 338, 458, 264, .300 cal, 7 mm

Magazine Spring Retainer Winchester 1200 and 1300 Shotgun 12 gauge

Magazine Spring--16 ga-- Winchester 1897

Magazine Throat (Upper) Winchester 1200 and 1300 Shotgun 12 gauge

This is an ORIGINAL magazine throat Winchester model 72 rifle.

Magazine Throat Winchester model 74 for 22 LR ORIGINAL

Inner Magazine tube ORIGINAL, including follower spring and follower-plug-- tube is is 17 1/2 inches in length, standard on all Winchester 22...

An ORIGINAL outer magazine tube for an 1890 Winchester WRF pump .22 rifle. LOADING PORT on tube is larger and made to accommodelate WRF bullets but...