Winchester Original Part

Steel Metal Magazine Floor-plate (Cover) Hinge Plate PIN for the post-64 Winchester Model 70 ORIGINAL.  This holds the hinge plate to the...

Magazine Release Plunger STOP Winchester 69 and 69A ORIGINAL

Trigger adjusting screw Spring ORIGINAL Winchester model 69a

Trigger Pin ORIGINAL for 12/16 gauge model 37 Winchester shotguns. This pin goes through the lower receiver and holds the trigger in place.

Winchester 1902, 1904, 36, 58 or 99 firing pin head pin

This is a NEW trigger guard screw for Winchester models 1904, 58, 67, 69, 72 and 59. There are 2 screws needed per trigger guard on those models. The...

This is an ORIGINAL Plug screw that fits into the upper tang on the 1890 or 1906, 1903, 62, 62A, 63 1866 1873 1876 1892 1894 1886 1895, model 53 and...

This is an ORIGINAL pin that holds the trigger and sear in place Winchester model 94 POST 64

This is the hammer spring (mainspring) abutment Winchester model 61

This is an ORIGINAL pin that holds the trigger and sear in place on the Winchester model 1873 lower tang. Up to serial number 28,000 this pin was...

Adjusting sleeve lock Winchester 1897 ORIGINAL

Carrier PLUNGER Winchester 1200 and 1300 Shotgun 12 gauge

Firing pin Collar Winchester 1200 and 1300 Shotgun 12 gauge

This is the little spring that goes around the Forearm of the friction stud on the Winchester model 94 POST 64.

Magazine Cap Retainer Spring Winchester 1200 and 1300 Shotgun 12 gauge

Pistol Grip Cap SCREW for the Winchester Model 88 stock - ORIGINAL

Slide Arm Bridge Retaining Screw Winchester 1200 and 1300 Shotgun 12 gauge

Slide Arm Extension Cap Ring Assembly Winchester 1200 and 1300 Shotgun 12 gauge

Stock Cap Pistol grip SCREW Winchester 1200 and 1300 Shotgun 12 gauge

Trigger PIN Winchester 1200 and 1300 Shotgun 12 gauge

Trigger Stop Screw NUT Model 70 Winchester ORIGINAL

This is an ORIGINAL ejector spring Wichester 1894 (pre 64) Note: If the ejector does not protrude from the bolt face or if you can push it back...

This is the PLUNGER  for the RIGHT  extractor on the Winchester model 12. It fits all gauges.

This is the plunger upper extractor on the Winchester model 61 .22 rifle

Firing pin Stop SCREW Winchester Model 70 pre-64 ORIGINAL

This is AN ORIGINAL  pin that holds the trigger and sear in place on the Winchester model 1873 lower tang. Up to serial number 28,000 this pin...

Magazine Lock SPRING Winchester Model 88 ORIGINAL

This is the cartridge cut off spring Winchester model 63 and 1903. Even though the cutoff shape is different for both guns, the spring is the same.

This is an ORIGINAL retaining pin (2 are required) that holds the extractor in place on the Winchester 94 POST 64.

This is the link pin stop screw Winchester 94 POST 64. It fits rifles with serial number above 5,500,001, It also fits the model 9410 shotgun

Magazine Lock PIN Winchester Model 88 ORIGINAL

PIN for the Trigger of a Winchester 1895 Lee Straight Pull rifle ORIGINAL

This is an ORIGINAL Trigger guard SCREW for the Winchester Model 12. It fits all gauges. New screws are also available

Carrier Plunger Winchester model 12

These are ORIGINAL style Phillips head buttplate screws FOR THE  flat hard black plastic style buttplates found on the POST-64 Winchester...

This is the PIN for the lower extractor in the s,l,lr  Model 61 Winchester

This is an ORIGINAL trigger guard screw for Winchester models 1900, 1902, 1904, 58, 67, 67A, 68, 69, 69A, 72 and 59. There are 2 screws needed...

Link   Rear PIN Winchester Model 88 ORIGINAL

Screw to hold in the Cartridge Stop Assembly - Old Style C screw that goes in from side of receiver. This screw fits on both sides of the 1897...

Magazine Release Plunger SPRING Winchester 69 and 69A ORIGINAL

Sear SPRING Model 70 Winchester ORIGINAL

Action slide lock spring Winchester 1897

Spring that puts tension on the hammer Winchester model 61 .22 cal. This is 61 that shoots the Short, Long or Long Rifle. The magnum .22 uses a...

These are ORIGINAL Magazine band bushing screws --for the 12g-- Winchester 1897 shotgun.  All threads in excellent condition.

Breech Bolt Plug Winchester model 72 bolt

This is the breech bolt retaining spring Winchester model 61

Ejector spring screw  Winchester 1897

Mainspring Screw ORIGINAL Winchester 1885 rifle. This screw attaches through the mainspring base.

Dust Cover spring screw ORIGINAL Winchester 1873 rifle and 1876 

This is the ejector spring Winchester 94 POST 64. It fits calibers 44 rem, 357 magnum and 45 colt.

This is a new operating sleeve spring Winchester model 63 and model 1903. It fits into the operating sleeve and around the bolt guide rod.

Stock Bolt Washer Winchester 1897 (1251a)

Trigger Lock Plunger Spring Winchester model 63 - 1903

Cam PIN Winchester 1200 and 1300 Shotgun 12 gague

A metal Pistol Grip INSERT with two claws that fit into the wood - an ORIGINAL  metal Insert that fits under the cap of the Winchester...

Stock Bolt Washer Winchester 1200 and 1300 Shotgun 12 gauge

Action slide lock pivot Winchester 1897

Firing pin SPRING Winchester 1200 and 1300 Shotgun 12 gauge

This is the rod that attaches to the hammer on the Winchester model 61. The coil hammer spring (mainspring) sits around this rod

Trigger PIN for a Winchester 1895 Lee Straight Pull rifle ORIGINAL

An original lower screw model 63 or model 1903 Winchester rifle buttplate. These are specially shortened screws so that they do not split the narrow...

This is the screw that holds in the ejector on the Winchester model 63 and 1903 .22 rifle

This is the stop screw Winchester model 63 and 1903 extractor plunger. This screw is on the left side of the breech right in front of the extractor.

Hammer  SPRING  for WINCHESTER 1911  Model 11 .ORIGINAL . If you need the Hammer assembly  please chose...

This is the carrier stop SPRING for the Winchester 1892 rifles. This carrier stop spring is in on the left side of your carrier. The purpose of...