Winchester Original Part

Firing pin SPRING Winchester Model 70 pre-64 ORIGINAL

ForForearm Screw ORIGINAL Winchester 1885 rifle

Knock-off Spring pin ORIGINAL Winchester 1885 rifle

Lever Link Pin long ORIGINAL Winchester 1885 rifle

Lower Barrel Band PIN for a Winchester 1895 Lee Straight Pull rifle ORIGINAL

Sear Pin ORIGINAL Winchester 1885. This is the long pin that goes through the top of the receiver and holds the Sear in place.

Sear Spring SCREW ORIGINAL Winchester 1885 rifle

Winchester model 67, 67A and 68  trigger spring ORIGINAL

Upper tang Screw Winchester 1885 High Wall

This is the carrier stop Winchester 1892 in 25-20 and 32-20 cal rifles. A pin holds the carrier stop and carrier stop spring in on the left side of...

Breech Bolt Lock Winchester Model 52

SPRING for the Extractor on a Winchester 1895 Lee Straight Pull rifle ORIGINAL

Magazine Release Plunger ESCUTCHEON Winchester 69 and 69A ORIGINAL

Trigger Lock (Safety) Winchester model 63 - 1903. This lock fits into both models of semiautomatic rifles.

These are ORIGINAL large style slot head buttplate screws for regular black hardened plastic, crescent style and carbine style metal buttplates on...

BARREL BUFFERS For A WINCHESTER Model 11

Breech Bolt STOP PLUNGER for a Model 70 Pre-64 Winchester Model 70 rifle.  The is an ORIGINAL Winchester part.

Firing Pin Spring Winchester Model 52

Magazine SPRING Winchester 1200 and 1300 Shotgun 12 gauge

Sear PIN Model 70 Winchester ORIGINAL

Action slide spring --12g-- Winchester 1897 

This is an ORIGINAL  magazine spring Winchester 1873, 1892 rifle and Marlin rifles. It fits the 25-20 and 32-20, .218 bee cal. magazine...

Link Rear PIN Winchester Model 88 ORIGINAL

This is the carrier stop SPRING for the Winchester 1892 rifles. This carrier stop spring is in on the left side of your carrier. The purpose of...

An original lower screw model 63 or model 1903 Winchester rifle buttplate. These are specially shortened screws so that they do not split the narrow...

This is the screw that holds in the ejector on the Winchester model 63 and 1903 .22 rifle

This is the stop screw Winchester model 63 and 1903 extractor plunger. This screw is on the left side of the breech right in front of the extractor.

This is the firing pin striker Winchester model 94 POST 64

Breech Bolt Sleeve Winchester model 72 rifle

This is an ORIGINAL pin for the hammer spring (mainspring) abutment on the Winchester model 63 and 1903

Trigger Guard Screw ORIGINAL model 37 Winchester. Screw fits front and rear trigger guard attachment holes on all gauges.

Barrel Chamber ring Retaining Screw (2 Required) Winchester 1897

Carrier Plunger screw Winchester model 12

Safety Spring Plunger Winchester Model 88 ORIGINAL

SCREW that hold the Spring for the Top Lever Model 37 Winchester.  This lever Spring screw is ORIGINAL and the same for all gauges of the Model...

Dust Cover spring screw ORIGINAL Winchester 1873 rifle and 1876 

This is the ejector spring Winchester 94 POST 64. It fits calibers 44 rem, 357 magnum and 45 colt.

This is a new operating sleeve spring Winchester model 63 and model 1903. It fits into the operating sleeve and around the bolt guide rod.

Stock Bolt Washer Winchester 1897 (1251a)

This is the breech bolt retaining spring Winchester model 61

Ejector spring screw  Winchester 1897

Mainspring Screw ORIGINAL Winchester 1885 rifle. This screw attaches through the mainspring base.

Breech Bolt Plug Winchester model 72 bolt

An ORIGINAL Ejector for the Winchester Model 88

Hammer Spring Support Winchester 1200 and 1300 Shotgun 12 gauge.  This plastic disc fits into each side of the hammer spring - two are...

This is an ORIGINAL operating sleeve spring for the Winchester model 63 and model 1903. It fits into the operating sleeve and around the bolt guide...

Knock-off operating pin ORIGINAL Winchester 1885 rifle

Safety Lock PLUNGER  Model 70 Winchester ORIGINAL

Trigger Spring adjusting nut for a Model 70 Winchester complete ORIGINAL This nut butts up against the adjusting screw as one of the two...

Link   Rear PIN Winchester Model 88 ORIGINAL

Action slide handle retaining spring Winchester 1897

Screw for Carrier Spring Winchester 94, model 64 and 55 ORIGINAL (wp188-a wop)

These are ORIGINAL screws that secure the forearm cap of the Winchester model 63 and 1903 to the tenon attached to the underside dovetail of the...

Carrier Plunger Winchester model 12

This is the cartridge cut off spring Winchester model 63 and 1903. Even though the cutoff shape is different for both guns, the spring is the same.

This is an ORIGINAL retaining pin (2 are required) that holds the extractor in place on the Winchester 94 POST 64.

This is the link pin stop screw Winchester 94 POST 64. It fits rifles with serial number above 5,500,001, It also fits the model 9410 shotgun

Magazine Lock PIN Winchester Model 88 ORIGINAL

PIN for the Trigger of a Winchester 1895 Lee Straight Pull rifle ORIGINAL

Trigger lock SPRING Winchester model 12 

This is the cartridge block screw .357 mag Winchester POST 64. It holds the cartridge block in place, part number C105B

This is the ejector spring Winchester 94 post 64. It will NOT fit 44 rem, 45 colt or 357 mag

This is the pl8nger  SPRING for the  Right extractor  on the Winchester model 12. It fits all gauges.

ORIGINAL SCREW that Fits models 1894,64, 55 Winchester. This screw joins the finger lever to the link. (make sure when installing the head sits down...

This is a friction stud  SPRING for the 1886 Winchester lever-action rifle. It sits on the side of the fingerlever .