Winchester Original Part

This is an ORIGINAL used Winchester 94  EARLY PRODUCTION barrel in EXCELLENT condition, with a 20 inch round barrel.  This 1894 fits a 30...

This is an ORIGINAL used Winchester 94  EARLY PRODUCTION barrel in  GOOD  +  condition, with a 20 inch round barrel. ...

This is an ORIGINAL 1894 Carbine barrel in EXCELLENT condition. The barrel length is 20 inches, round, and Winchester model 94 post 64 44-40 Caliber...

An ORIGINAL and RARE 405 WCF barrel for the 1895 Winchester. This barrel is 24 inches long.  This is a rare caliber and it is difficult to...

Barrel for a Winchester 1895 Lee Straight Pull CARBINE  20 inch .236 cal. ORIGINAL .   VERY nice bore and rifling.  The...

Barrel for a Winchester 1895 Lee Straight Pull  MUSKET  28 inch  ORIGINAL and in EXCELLENT condition.  The .236  bore...

An ORIGINAL Barrel for the Winchester 1897 shotgun.  This barrel with a shiny bore and alomst complete bluing cover.  The barrel is from...

This is a ORIGINAL used barrel in GOOD condition 20 inch round barrel POST-64 Winchester 94 in 30 WCF (30-30 CALIBER). This barrel is made POST-64...

Forearm for a Model 94 EXCELLENT condition for 12 Gauge ORIGINAL

BARREL For A 12 GA WINCHESTER Model 11 - Excellent condition with shiny bore.

This is the link pin stop screw Winchester 94 POST 64. It fits rifles with serial number above 5,500,001, It also fits the model 9410 shotgun

This is the screw that holds on the forearm cap Winchester model 94 POST 64 for the COMMEMARATIVE one screw style  Fore arm cap (e.g.,...

This is the ejector spring Winchester 94 post 64. It will NOT fit 44 rem, 45 colt or 357 mag

This is the upper tang plug screw Winchester model 94 POST 64. It fills the hole behind the hammer where you would put the front screw tang mounted...

This is the cartridge block screw .357 mag Winchester POST 64. It holds the cartridge block in place, part number C105B

This is the cartridge block 357 mag Winchester 94 POST 64. The screw used for this part is C104B

This is the trigger stop also called the safety bar Winchester model 94 POST 64. The pin portion in the middle of this part comes down through the...

This is the trigger Winchester 94 POST 64

This is an ORIGINAL Winchester carrier  for the POST 64 Winchester 94 in 30-30 (30WCF) caliber. This is a Stamped  ORIGINAL part! 

This is the cartridge guide screw Winchester 94 POST 64. Will not work on cals 44 rem, 45C or 44-40

This is the rear barrel band Winchester 94 POST 64. THis band goes around the forearm and uses screw C101A.

This is the trigger stop spring that the hammer spring (mainspring) guide rod sits in and ontop of Winchester 94 POST 64.

This is the extractor for all cals other than .357 magnum. It fits Winchester model 94 POST 64. (the .357 mag extractor is part number c113) this is...

ORIGINAL Spring cover Winchester 94 POST 64 IN 30-30 CAL only. Note: The Loading gate (spring cover) for .357 is part number (c175-a)., 450 marlin,...

This is the link SPECIFICALLY 357 mag in POST 1964 PRODUCTION Winchester 94 rifles. This link does not have the internals, but you can choose on the...

This is the forearm tenon Winchester 94 POST 64. It is also called the forearm cap bracket. This part slides into groove on underside of barrel and...

This is the ejector spring Winchester 94 POST 64. It fits calibers 44 rem, 357 magnum and 45 colt.

This is the retaining screw(s) that hold the extracor in place on the Winchester 94 POST 64.

This is the carrier spring Winchester 94 POST 64 in 357 mag caliber. It is held in place by screw C105.

This is the lower tang Winchester 94 POST 64 ANGLE eject model. It is blued and does not come with any of the other components ie trigger, springs...

This is the firing pin striker Winchester model 94 POST 64

This is the pin that holds the firing pin striker in place on the Winchester model 94 POST 64

This is the screw that holds on the front sight ramp on the Winchester model 94 POST 64. (this is front ramp that is removable--not soldered on)

This is the LEFT cartridge guide Winchester model 94 POST 64 in 357 mag cal.

This is the RIGHT cartridge guide Winchester model 94 POST 64 in 357 mag cal.

This is the friction stude Winchester model 64 POST 64. This part helps keep the link in place when the lever is closed.

This is AN ORIGINAL hammer spring (mainspring) guide rod for the Winchester 94 POST 64

This is an ORIGINAL complete locking bolt POST-64 top eject Winchester model 94. The bolt comes with the firing pin striker and firing pin striker...

This is the hard to find firing pin Winchester model 94 POST 64 TOP EJECT ORIGINAL FIRING PIN . ready to install and use . If you have an later...

This is the link Winchester 94 POST 64 early top ejects.COMPLETE  This link have the internals,  If you are having problems with...

Hammer Spur Extension Winchester 94 post-64 ORIGINAL.  This is for the 9410 series of angle and top eject rifles.  The threaded end...

This is the RIGHT SIDE cartridge guide Winchester model 94 POST 64 44 caliber magnum.

This is an ORIGINAL complete locking bolt for a side eject POST-64 Winchester 94. The bolt comes with the firing pin striker and firing pin...

This is the ejector post 64 Winchester Model 94 Angle eject series with larger attachment arm on distal end.  This is a LONG ejector ,...

This is the Forearm cap for the Winchester 94 POST 64 Commemorative Rifle, large caliber (e.g., Lengendary Frontiers Man). It holds the wood...

Forearm ORIGINAL for 1903 Winchester semiautomatic rifle in EXCELLENT condition. Original finish and no cracks or missing pieces of wood. Color a...

This is the hard to find expert hour glass shaped forearm. This came of the model 1906 Experts with the pistol grip stock. It DOES have the...

Forearm (also called the Action Slide Arm) 12 gauge Ribbed (NEW) Winchester model 12 shotgun. Minimal fitting required.

Forearm smooth (ORIGINAL) Winchester 12 -  excellent condition

 ORIGINAL   Forearm for a Winchester Model 1200 and 1300,  12 gauge Corn cub style  12 grove  , nice , excellent...

Here is an ORIGINAL pre-64 Winchester 94 forearm CARBINE ROUND barrel, in GOOD condition. This is held on by the barrel band and all wood on this...

This is a high quality, ORIGINAL  Black Walnut   wood FOREARM   for the model 24  Winchester 12 Gauge ...

This is the hard to find ORIGINAL EARLY forearm Winchester model 61 pump .22 rifle from the pre-war production period. This smaller...

This is the hard to find ORIGINAL mid-production forearm for the Winchester Model 61 pump .22 rifle.  This is the mid-period production foreram...

Forearm model 62 - ORIGINAL from a pre-war period gun. This is the torpedo-shaped forearm.

This is an ORIGINAL forearm for the Winchester model 62-62A post war. After 1939 production Winchester changed the forearm from the smaller pre...

This is an ORIGINAL forearm for the Winchester model 62-62A post war. On Dec 1st 1948 (around serial number 225,000) Winchester changed the...

This is the forForearm Winchester Model 71This part sits in a cut out on the under side of the barrel and one is fiberglassed, rest open.

This is an ORIGINAL forearm for the Winchester 1873 rifle. It will fit all large-caliber rifles with an OCTAGON barrel in ...

This is GOOD quality ORIGINAL forearm for the Winchester 1873 rifle. If fits rifles with the OCTAGON barrel in Small calibers (.32-20,.32...

This is an ORIGINAL forearm for the Winchester 1873 rifle. It will fit all large-caliber rifles with a ROUND barrel in  (.38...

This is an ORIGINAL forearm from  a Winchester 1873 rifle that has been repaired. It will fit all large-caliber rifles with...

This is A  high   quality ORIGINAL forearm for the Winchester 1876 rifle. If fits rifles with the OCTAGON barrel . Excellent...

This is an ORIGINAL high-quality black walnut forearm that came on a Winchester 1886 RIFLE. It fits rifles with the ROUND barrel. 98...

This is an ORIGINAL Forearm IN EXCELLENT condition for 1890 and 1906 Winchester. Has Euscutcheon already installed to prevent forearm screws from...