| Item Id |
Product Image |
Item Name |
Price |
Quantity |
wp1 |
|
Action Slide ORIGINAL for 1890 and 1906 model 62-62A Winchester pump .22 rifles. Your wood forearm is attached to the front round part of this... |
$61.00
CLICK HERE
for More Info
or to Order |
58 |
wp539-b |
|
This is the rear barrel band in Silver (dull - satin/flat) Winchester 1892 or 1894 pre64 rifles and post-64 Commenmeratives. It comes with a blued... |
$56.00
CLICK HERE
for More Info
or to Order
|
0 |
wp94-a |
|
This is an ORIGINAL recoil SPRING used on the Winchester model 63 and model 1903. This spring fits over the bolt guide rod. |
$10.25
CLICK HERE
for More Info
or to Order |
5 |
pl 20-b plop |
|
Breech Bolt PLUG for a Page-Lewis Model D Reliance - this part screws into the rear of the bolt and acts like a cocking lever. |
$29.50
CLICK HERE
for More Info
or to Order
|
0 |
s30-a sop |
|
Breech Block Stevens Crackshot. This is an ORIGINAL part. |
$69.00
CLICK HERE
for More Info
or to Order
|
0 |
wp314 |
|
These are NEW BUTTPLATE SCREWS for THE 1903 AND 63 Winchester metal buttplate. These screws are shorter screw so they will not split the... |
$6.25
CLICK HERE
for More Info
or to Order |
28 |
wp163 wop |
|
Carrier Block brass ORIGINAL Winchester 1873 in 32-20 Very good condition ORIGINAL part . p;atina and lettering vary do to age of item. |
$136.00
CLICK HERE
for More Info
or to Order |
3 |
wp260-b wop |
|
Carrier Block ORIGINAL 38-40 Large Caliber Winchester model 1873. Still has some lettering. but do to age it is vary piece by... |
$148.00
CLICK HERE
for More Info
or to Order |
2 |
wp260-a wop |
|
Carrier Block ORIGINAL 44-40 Large Caliber Winchester model 1873. Lettering OF CALIBER DESIGNATION IS VISIBLE, but at different stages of wear. Will... |
$189.00
CLICK HERE
for More Info
or to Order
|
0 |
wp496 wop |
|
This is the carrier plunger Winchester model 61. The carrier plunger spring puts tension on this part (part number 497) |
$14.25
CLICK HERE
for More Info
or to Order |
2 |
wp17-b wop |
|
This is the carrier Winchester model 61. It fits the short, Long and Long Rifle cartridges |
$29.50
CLICK HERE
for More Info
or to Order |
50 |
wp92-a wop |
|
Carrier 1890 Winchester WRF (Winchester Rim Fire) pump .22 is complete. This original part, including the carrier lever (wp19A) and the carrier lever... |
$196.00
CLICK HERE
for More Info
or to Order |
4 |
wp517 |
|
This is the carrier Winchester model 61. It fits the WRF (Winchester rim fire) Rifle cartridges |
$19.75
CLICK HERE
for More Info
or to Order
|
0 |
wp116 |
|
This is a new Cartridge cut off Retainer Winchester model 61. It is short, long and long rifle. |
$46.50
CLICK HERE
for More Info
or to Order |
2 |
wp61-b |
|
This is the cartridge cut off Winchester model 61 short, long and long rifle .22. If you are having a problem of shells coming up too many at a time... |
$18.25
CLICK HERE
for More Info
or to Order
|
0 |
wp137 |
|
This is the cartridge cut off Winchester model 63 .22 rifle. This part stops the cartridges from entering the chamber under a cartridge that is... |
$23.75
CLICK HERE
for More Info
or to Order
|
0 |
wp477 |
|
This is the cartridge cut off Winchester model 61 that shoots the WRF rounds. This part stops multiple rounds from entering the chamber. If your gun... |
$8.95
CLICK HERE
for More Info
or to Order |
20 |
wp160-a wop |
|
Dust Cover Winchester 1873 Third model ORIGINAL part. The amount of original Bluing varies. |
$196.00
CLICK HERE
for More Info
or to Order
|
0 |
s100-a |
|
Ejector model 44 Stevens. This has a center spring plunger that is included with this Stevens part. This extractor is larger than the one used... |
$45.00
CLICK HERE
for More Info
or to Order |
10 |
wp487 wop |
|
This is the ejector stop Winchester model 61 |
$8.25
CLICK HERE
for More Info
or to Order |
13 |
wp14-a wop |
|
This is the ejector Winchester model 61. This is Short, Long, and Long Rifle cartridges. |
$21.25
CLICK HERE
for More Info
or to Order |
14 |
wp476 |
|
This is the ejector Winchester model 61. This is WRF cartridges. |
$16.25
CLICK HERE
for More Info
or to Order
|
0 |
wp113 wop |
|
This is an original ejector Winchester model 63 .22 rifle. If you are looking 1903 ejector please see part number wp141. |
$23.25
CLICK HERE
for More Info
or to Order |
1 |
wp133-a |
|
This is the extractor plunger Winchester model 63 and the 1903 |
$7.50
CLICK HERE
for More Info
or to Order
|
0 |
wp235 wop |
|
This is an ORIGINAL extractor .32-20 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor itself is a... |
$54.00
CLICK HERE
for More Info
or to Order
|
0 |
wp236 wop |
|
This is an ORIGINAL extractor .38-40 or 44-40 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor... |
$106.00
CLICK HERE
for More Info
or to Order
|
0 |
wp14-L |
|
This is the lower extractor model 61 Winchester |
$25.75
CLICK HERE
for More Info
or to Order |
3 |
wp14-d wop |
|
This is the plunger upper extractor on the Winchester model 61 .22 rifle |
$5.25
CLICK HERE
for More Info
or to Order
|
0 |
s33-a2 |
|
Extractor for the Stevens 26 Crackshot .22 rifle. This is a NEW quality reproduction part and is being sold with the pin. |
$29.00
CLICK HERE
for More Info
or to Order
|
0 |
s33-a1 |
|
Extractor for the Stevens Crackshot. This is a reproduction part and is for the Model 16 Crackshot with side lever - You can purchase the plunger... |
$29.00
CLICK HERE
for More Info
or to Order
|
0 |
wp14-u |
|
This is the upper extractor model 61 Winchester. |
$29.50
CLICK HERE
for More Info
or to Order
|
0 |
wp128 |
|
This is the extractor Winchester model 63 |
$32.25
CLICK HERE
for More Info
or to Order |
6 |
wp121 |
|
This is the LOWER extractor Winchester model 61 that shoots the .22 WRF round. (will not work for short, long or long rifle. see part wp14L) |
$19.75
CLICK HERE
for More Info
or to Order |
10 |
wp120 |
|
his is the UPPER extractor Winchester model 61 that shoots the .22 WRF round. (will not work for short, long or long rifle. see part wp14U) |
$19.75
CLICK HERE
for More Info
or to Order
|
0 |
wp26-b |
|
Extractor(ejector) 1890 WRF pump 22 rifle. This extractor wil NOT work on the SHORT and LONG - LONG RIFLE 1890 models, (only the WRF models) If your... |
$32.50
CLICK HERE
for More Info
or to Order
|
0 |
s103-a sop |
|
Finger Lever Plunger model 44 Stevens. This is an ORIGINAL Stevens part. |
$4.15
CLICK HERE
for More Info
or to Order
|
0 |
H102 wop |
|
This is an ORIGINAL finger lever from a Winchester 1873 Rifle or carbine. These are for guns that are after serial number 28,000 and have the spur... |
$167.50
CLICK HERE
for More Info
or to Order |
2 |
s34-a sop |
|
Firing pin Stevens Crackshot. This is an ORIGINAL part. |
$17.50
CLICK HERE
for More Info
or to Order
|
-1 |
wp2-a |
|
Firing pin stop for 1890 and 1906 and early model 62 Winchester pump .22 rifles. This goes on the left side of the bolt and keeps the firing pin in... |
$29.25
CLICK HERE
for More Info
or to Order |
149 |
wp2-c |
|
This is the firing pin stop Winchester 62A. It takes the firing pin stop pins and the holes are located in a slightly different place unlike the 90 -... |
$13.75
CLICK HERE
for More Info
or to Order |
20 |
wp749 |
|
This is the firing pin for Winchester 1894 lever action rifle also for model 64 and model 55. It fits all calibers. Note: Winchester made 2 types of... |
$45.50
CLICK HERE
for More Info
or to Order |
10 |
wp745-a |
|
This is the firing pin Winchester model 61 S, L LR pump .22 rifle. |
$31.50
CLICK HERE
for More Info
or to Order |
10 |
wp745-b |
|
This is the firing pin Winchester model 61 pump .22 rifle that shoots the WRF round. If your 61 shoots the Short, Long or Long Rifle see part number... |
$36.50
CLICK HERE
for More Info
or to Order |
2 |
wp744 |
|
This is the firing pin Winchester model 63. It is hardened and made to factory specs of the original. Not the same as an 1903 NEW part ... |
$42.00
CLICK HERE
for More Info
or to Order
|
0 |
wp219 wop |
|
A COMPLETE Hammer unit model 63 or model 1903 semiautomatic Winchester rifle. The hammer comes with Guide Rod, hammer spring (mainspring), abutment,... |
$76.00
CLICK HERE
for More Info
or to Order |
3 |
wp122 |
|
This is the hammer catch Winchester model 61. |
$9.75
CLICK HERE
for More Info
or to Order |
5 |
wp261-a wop |
|
This is the hammer stirrup Winchester 1866 1873 1876 1886 lever-action rifles and the 1897 and 1893 shotgun. This part attaches to the... |
$12.95
CLICK HERE
for More Info
or to Order
|
0 |
wp142 wop |
|
Hammer model 63 Winchester ORIGINAL (142 wop) Also fits the model 1903. This is a stripped part with only the hammer present. See wp219 for complete... |
$27.00
CLICK HERE
for More Info
or to Order |
2 |
wp498 wop |
|
This is an ORIGINAL hammer Winchester model 61. |
$30.95
CLICK HERE
for More Info
or to Order |
3 |
wp455 wop |
|
Steel Metal Magazine Floor-plate (Cover) fior the post-64 Winchester Model 70 ORIGINAL. Solid steel construction in very good condition. |
$79.00
CLICK HERE
for More Info
or to Order
|
0 |
wp717-a |
|
This is a NEW magazine follower for 38/40 and 44/40 caliber Winchester 1866 and also fits 1873. This is the second type of follower 1866... |
$23.75
CLICK HERE
for More Info
or to Order |
19 |
wp170-a wop |
|
Follower ORIGINAL for 38&44-40 Winchester 1873 |
$56.00
CLICK HERE
for More Info
or to Order
|
0 |
wp1290-a wop |
|
Follower for the 12 gauge Winchester 1897 pump shotgun. This is an ORIGINAL Winchester part. |
$23.90
CLICK HERE
for More Info
or to Order |
3 |
wp1290-b wop |
|
Follower ORIGINAL for a 16 gauge Winchester 1897 pump shotgun. |
$26.00
CLICK HERE
for More Info
or to Order
|
0 |
wp170-b wop |
|
Follower ORIGINAL for 32-20 Winchester 1873. This is an ORIGINAL Winchester part that fits inside the magazine tube. These... |
$56.00
CLICK HERE
for More Info
or to Order
|
0 |
wp475 wop |
|
This is the magazine follower Winchester model 63 rifle. This part is what pushes the rounds down the inner mag tube. |
$14.75
CLICK HERE
for More Info
or to Order |
1 |
wp172-a wop |
|
Magazine Hanger (magazine ring) ORIGINAL for 32-20 Winchester 1873. The pin that goes through this hanger is part wp726 pin. |
$36.00
CLICK HERE
for More Info
or to Order
|
0 |
wp171-a wop |
|
This is a Magazine Plug 38-40 & 44-40 caliber Winchester 1873 rifles. This magazine plug has a lip which locks into the underside of the barrel. |
$58.00
CLICK HERE
for More Info
or to Order
|
0 |
wp563 wop |
|
This is the operating sleeve Winchester model 63 and 1903. (Note that the tip and pin tip are different between the 63 and 1903 Winchester models) |
$27.50
CLICK HERE
for More Info
or to Order |
6 |
T722-a |
|
A MUST for anyone removing pins from guns - a Grace 4 piece BRASS starter Pin Punch Set that starts the pins for removal from their holes. ... |
$25.00
CLICK HERE
for More Info
or to Order
|
0 |
wp144 wop |
|
Sear Winchester model 63 and 1903 semiautomatic rifles. |
$24.00
CLICK HERE
for More Info
or to Order |
4 |
s36-a sop |
|
Side lever ORIGINAL for Stevens Crackshot 22 rifle. This is later version of the Crack Shot rifle (Models 16 & 161/2) and the lever screws... |
$56.00
CLICK HERE
for More Info
or to Order
|
0 |
wp177 wop |
|
Side Plate for the left receiver side on the 1873 Winchester. This is an ORIGINAL. Winchester part so the bluing condition varies. |
$86.00
CLICK HERE
for More Info
or to Order |
1 |
wp162 |
|
Left side plate for Winchester 1873 2nd and 3rd models. MACHINED in the USA SPECIFICALLY for the Antique... |
$69.75
CLICK HERE
for More Info
or to Order |
1 |
wp94-b |
|
Improved striker for faster lock time. 30 lb strength spring. no misfires. |
$14.75
CLICK HERE
for More Info
or to Order
|
0 |
wp488 wop |
|
This is the original split stock bolt washer Winchester model 61 AND Winchester models 97 SOLID FRAME (CHINESE IMPORT BY TTN), 42, 24, 10, 05, 07, 37... |
$10.75
CLICK HERE
for More Info
or to Order |
1 |
wp515 wop |
|
The is the bolt Winchester model 61 that attaches the stock to the reciever |
$8.50
CLICK HERE
for More Info
or to Order
|
0 |
wp135 wop |
|
Tenon ORIGINAL for a Winchester Model 63 and also fits model 1903. It sits on the underside of the barrel and has threaded holes on either side... |
$54.00
CLICK HERE
for More Info
or to Order
|
0 |
wp169-b wop |
|
Toggle Link Left ORIGINAL Winchester 1873 |
$156.00
CLICK HERE
for More Info
or to Order
|
0 |
wp169-c wop |
|
Right Toggle Link ORIGINAL for Winchester 1873. |
$136.00
CLICK HERE
for More Info
or to Order
|
0 |
wp145-c wop |
|
Trigger Lock (Safety) Winchester model 63 - 1903. This lock fits into both models of semiautomatic rifles. |
$8.50
CLICK HERE
for More Info
or to Order |
6 |
wp110 |
|
This is the trigger lock plunger Winchester model 61 .22 rifle |
$6.75
CLICK HERE
for More Info
or to Order |
10 |
wp145-a wop |
|
Trigger Lock Plunger Winchester model 63 and 1903 semiautomatic rifles. |
$12.75
CLICK HERE
for More Info
or to Order
|
0 |
wp109 |
|
This is the trigger lock Winchester model 61. Excellent condition original item. |
$16.75
CLICK HERE
for More Info
or to Order |
5 |
s41-a sop |
|
Trigger Stevens Crackshot. This is an ORIGINAL part. |
$14.00
CLICK HERE
for More Info
or to Order |
5 |
wp139 wop |
|
Trigger that fits a Winchester model 63 or 1903. This is an ORIGINAL part. |
$17.00
CLICK HERE
for More Info
or to Order |
12 |
