Item Id |
Product Image |
Item Name |
Price |
Quantity |
set Scope |
|
If your rifle previously had a receiver mounted sight or scope it most likely used these holes. The screws that were used to hold the mount onto the... |
CLICK HERE for More Info or to Order |
156 |
set 1894-r |
|
This discounted set consists of all of the external screws on the Winchester 1894 RIFLE. (if you have 2 barrel bands that hold on forearm and... |
$39.50 CLICK HERE for More Info or to Order |
122 |
set1886-c |
|
This discounted set consists of all of the external screws on the Winchester 1886 and lever action CARBINE (if you have a Forearm cap that uses 2... |
$38.75 CLICK HERE for More Info or to Order |
44 |
set9006 wop |
|
This is for the person restoring Winchester guns who wants ORIGINAL parts - here is a packet of all original external screws Winchester 1890 and 1906... |
$49.00 CLICK HERE for More Info or to Order
|
0 |
set9006-spec |
|
This discounted set consists of all of the external screws on the Winchester 1890 Deluxe and 1906 Expert (Both have pistol grip stocks) IF YOU HAVE A... |
$31.50 CLICK HERE for More Info or to Order |
499 |
set1892-c |
|
This discounted set consists of all of the external screws on the Winchester 1892 CARBINE. (if you have a Forearm cap that uses 2 screws to hold the... |
$38.50 CLICK HERE for More Info or to Order |
69 |
set94post-c |
|
This is a discounted external screw set Winchester model 94 POST 64 Top eject Carbine. Your serial number should be from approximately 2,700,000 -... |
$55.75 CLICK HERE for More Info or to Order |
8 |
set94post-c wop |
|
This is an ORIGINAL discounted external screw set Winchester model 94 POST 64 Top eject Carbine. Your serial number should be from approximately... |
$82.00 CLICK HERE for More Info or to Order
|
0 |
set62 |
|
This set consists of all of the external screws on the Winchester model 62 .22 cal rifle. Quite often, non-hollow ground screwdrivers are... |
$22.00 CLICK HERE for More Info or to Order |
25 |
set73-r wop |
|
This is a set of ORIGINAL screws for the Third Model1873 Sporting rifle. The set includes 2 Forearm-cap screws (wp56); 2 Finger lever spring/ Carrier... |
$96.00 CLICK HERE for More Info or to Order
|
0 |
set1894-c wop |
|
A complete set of Winchester Factory ORIGINAL screws 1894 pre-64 CARBINE. Each screw comes with label and in an individual pocket. THESE ARE ORIGINAL... |
$50.00 CLICK HERE for More Info or to Order
|
0 |
set1894-r wop |
|
A complete set of Winchester Factory ORIGINAL screws 1894 pre-64 SPORTING RIFLE. Each screw comes with label and in an individual pocket. THESE ARE... |
$49.00 CLICK HERE for More Info or to Order
|
0 |
set70 guard |
|
There are three guard screws on the Winchester model 70 pre 64: Front, Middle and Rear. All Three screws are included in this set. wp578... |
$12.95 CLICK HERE for More Info or to Order |
11 |
set1873-c1 |
|
This is a discounted external screw set Winchester 1873 1ST (FIRST) model lever action CARBINE. (If your gun has a Forearm CAP rather than a barrel... |
$73.25 CLICK HERE for More Info or to Order |
63 |
set1873-r1 |
|
This is a discounted external screw set Winchester 1873 1ST (FIRST) model lever action RIFLE. (If your gun has a barrel band rather than a forearm... |
$72.25 CLICK HERE for More Info or to Order |
25 |
set1873-c2 |
|
This is a discounted external screw set Winchester 1873 2nd (SECOND) model lever action CARBINE. (If your gun has a FORForearm CAP rather than a... |
$71.75 CLICK HERE for More Info or to Order |
46 |
set1873-r2 |
|
This is a discounted external screw set Winchester 1873 2nd (SECOND) lever action RIFLE. (If your gun has a barrel band rather than a forearm cap... |
$69.75 CLICK HERE for More Info or to Order |
36 |
set1873-c3 |
|
This is a discounted external screw set Winchester 1873 3rd (THIRD) model lever action CARBINE. (If your gun has a Forearm CAP rather than a barrel... |
$67.50 CLICK HERE for More Info or to Order |
29 |
set1873-r3 |
|
This is a discounted screw set Winchester 1873 3rd/ THIRD model lever action RIFLE. (If your gun has a barrel band rather than a forearm cap that... |
$63.25 CLICK HERE for More Info or to Order |
72 |
set1876-r |
|
This is an external screw set Winchester 1876 lever-action rifle. All screws are machined here in the U.S. to Winchester factory specs. Each screw is... |
$51.00 CLICK HERE for More Info or to Order |
37 |
set1892-r |
|
This discounted set consists of all of the external screws on the Winchester 1892 RIFLE. (if you have 2 barrel bands that hold on forearm and... |
$38.50 CLICK HERE for More Info or to Order |
925 |
set 1894-c |
|
This discounted set consists of all of the external screws on the Winchester 1894 CARBINE made before 1964. (if you have a forForearm cap that uses 2... |
$39.50 CLICK HERE for More Info or to Order |
100 |
set1895-c |
|
This is a discounted external screw set Winchester 1895 lever action CARBINE. (If your gun has a screw on the underside of your FORForearm rather... |
$46.56 CLICK HERE for More Info or to Order |
20 |
wp43 |
|
Action slide handle (Forearm) screw for Winchester 1890 pump 22. This screw will fit all three models (1st 2nd and 3rd) of the 1890 and all 1906... |
$3.85 CLICK HERE for More Info or to Order |
107 |
wp41 |
|
This is the forearms screw also called the action slide handle screw. This is the screw that holds on the wooden forearm on the model 61 Winchester... |
$3.85 CLICK HERE for More Info or to Order |
154 |
p110 |
|
This is the tiny little pin that goes into the end of the assembly screw (take down screw) on the Winchester 1890 - 1906, mod 62 and also fits... |
$2.55 CLICK HERE for More Info or to Order |
48 |
wp48-a |
|
Takedown (Assembly)replacement (NEW) screw for either a Winchester 1890 - 1906 - 62 - 62A pump 22 rifle. This secures receiver to the trigger... |
$25.45 CLICK HERE for More Info or to Order |
15 |
s146 sop |
|
An ORIGINAL Takedown (barrel) Screw for the Stevens Marksman 12 |
$36.00 CLICK HERE for More Info or to Order |
7 |
s113-b2 sop |
|
Screw (Dummy) for the Barrel PIN on the Stevens model 70 Visible Loader. This pin screws into the barrel pin, on the right side of the... |
$8.95 CLICK HERE for More Info or to Order
|
0 |
s29-a |
|
A NEW Barrel (takedown) Screw for Stevens Crackshot (model 26 ) |
$26.00 CLICK HERE for More Info or to Order |
7 |
s101-b sop |
|
Breech block PIN model 44 Stevens. This is an ORIGINAL Stevens part. |
$5.15 CLICK HERE for More Info or to Order |
1 |
s30-b |
|
An ORIGINAL Screw for the Breech Block on a Stevens Crackshot. This screw goes across the receiver and holds the breech-block in place. |
$5.49 CLICK HERE for More Info or to Order
|
0 |
p170 |
|
In 1935 Winchester changed its locking system from using the protrusion on the firing pin as the breech bolt lock to this new system. If you... |
$11.50 CLICK HERE for More Info or to Order
|
0 |
wp231 wop |
|
These are ORIGINAL large style slot head buttplate screws for regular black hardened plastic, crescent style and carbine style metal buttplates on... |
$8.25 CLICK HERE for More Info or to Order
|
0 |
wp57 |
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.95 CLICK HERE for More Info or to Order |
474 |
rp168-b thick neck |
|
This is the ORIGINAL Buttplate Screw from Remiongton 22 bolt action rifles. This screw was used on models like the 33, 32, 31 and 12B and... |
$9.25 CLICK HERE for More Info or to Order |
1 |
s3-b sop |
|
SCREW for a Metal Butt plate ORIGINAL for Stevens Favorite .22 (will also fit Crackshot, Junior 14 and 141/2, and Savage Model 12 stocks)... |
$6.50 CLICK HERE for More Info or to Order |
2 |
wp314 |
|
These are NEW BUTTPLATE SCREWS for THE 1903 AND 63 Winchester metal buttplate. These screws are shorter screw so they will not split the... |
$6.25 CLICK HERE for More Info or to Order |
28 |
sav13-SCREW for Buttplate savop |
|
This is an ORIGINAL Savage Buttplate SCREW. This screw also fits into the end hole of the trigger guard and attaches to the stock wood. |
$12.25 CLICK HERE for More Info or to Order |
1 |
s1-a sop |
|
Screws ORIGINAL for Stevens Crackshot,Favorite, Ideal, Marksman, and other SMALL Stevens 22 rifles.buttplate. These screws are placed from top... |
$7.95 CLICK HERE for More Info or to Order |
6 |
wp836 wop |
|
ORIGINAL Buttplate screw with Flowered engraved in the head for the Winchester 1906, along with the 1902 and 1904 single-shot 22 rifles. These screws... |
$14.25 CLICK HERE for More Info or to Order |
7 |
wp69 |
|
Buttplate screw Winchester 1906, along with the Remington .22 rifles, Marlin and Stevens 22 rifles. These screws are one inch long with the FLAT... |
$3.20 CLICK HERE for More Info or to Order |
35 |
wp64-b1 |
|
This is the screw that attaches the Spring brass trap door on the buttplate of the Winchester 1866, 1876 and 1873 lever action rifles. The... |
$4.50 CLICK HERE for More Info or to Order |
13 |
p108 |
|
This is the pin that holds the carrier lever to the carrier on the Winchester 1890, 1906, 62 or 62A |
$4.25 CLICK HERE for More Info or to Order |
3 |
p138 wop |
|
This is the carrier plunger pin Winchester model 61 |
$3.45 CLICK HERE for More Info or to Order |
2 |
p154 wop |
|
This is the carrier stop Winchester 1892 in 25-20 and 32-20 cal rifles. A pin holds the carrier stop and carrier stop spring in on the left side of... |
$8.75 CLICK HERE for More Info or to Order
|
0 |
p153 wop |
|
This is the carrier stop Winchester 1892 in 38-40 and 44-40 cal rifles. A pin holds the carrier stop and carrier stop spring in on the left side of... |
$10.75 CLICK HERE for More Info or to Order
|
0 |
p139 |
|
This is the carrier stop pin Winchester model 61 |
$3.25 CLICK HERE for More Info or to Order |
5 |
wp119 |
|
This is the carrier stop screw Winchester model 61 |
$4.10 CLICK HERE for More Info or to Order
|
0 |
p130 |
|
This is the pin cartridge cut off on the Winchester model 61. It is also lower extractor |
$3.75 CLICK HERE for More Info or to Order |
25 |
p150 |
|
This is the pin that holds in the cartridge cut off (wp137) Winchester model 63. |
$3.25 CLICK HERE for More Info or to Order |
1 |
p107 |
|
This is the pin that holds the cartridge stop (wp3A) in the carrier of the Winchester 1906 and 62 or 62A. If you have a carrier that only holds the... |
$3.75 CLICK HERE for More Info or to Order |
5 |
p131 |
|
This is the cartridge stop pin Winchester model 1892. It fits all callibers |
$3.25 CLICK HERE for More Info or to Order |
74 |
wp161-d wop |
|
Dust Cover spring screw ORIGINAL Winchester 1873 rifle and 1876 |
$6.75 CLICK HERE for More Info or to Order
|
0 |
wp161-a wop |
|
Dust Cover Stop screw ORIGINAL, Winchester 1873 2nd or 3rd model rifle and 1876 |
$6.75 CLICK HERE for More Info or to Order
|
0 |
p140 |
|
This is the pin that holds the ejector in on the Winchester model 61 |
$3.45 CLICK HERE for More Info or to Order |
28 |
wp114 wop |
|
This is the screw that holds in the ejector on the Winchester model 63 and 1903 .22 rifle |
$7.50 CLICK HERE for More Info or to Order
|
0 |
p143 |
|
This is the ejector stop pin Winchester 1894 (pre 64). The ejector stop pin hole is 3/64 inches behind the front of the ejector. The pin is flush... |
$4.50 CLICK HERE for More Info or to Order |
30 |
p117 |
|
This is the pin that holds the .22 cal extractor onto the top of the breech bolt on the Winchester .22 cal 1873 Rifle. |
$3.50 CLICK HERE for More Info or to Order |
14 |
p118 |
|
This is the pin that holds the .32 cal extractor onto the top of the breech bolt on the Winchester .32 cal 1873 Rifles. |
$3.50 CLICK HERE for More Info or to Order |
19 |
p119 |
|
This is the extractor pin Winchester 1873 large .38 and .44 cal extractor. |
$3.50 CLICK HERE for More Info or to Order
|
0 |
p127 |
|
The is the extractor pin Winchester 1876 all cals. |
$4.15 CLICK HERE for More Info or to Order |
14 |
p111 |
|
This extractor pin is used on the Winchester models 1890, 1906, 62 and 62A. It goes in to0 the top of the bolt on the right side and down... |
$3.50 CLICK HERE for More Info or to Order |
25 |
p145 |
|
This is the extractor pin that fits the Winchester model 1894 , 64, 55. and 1892 . This is also the pin that is used on the 1894 and 1895... |
$3.25 CLICK HERE for More Info or to Order |
9 |
wp130 wop |
|
This is the stop screw Winchester model 63 and 1903 extractor plunger. This screw is on the left side of the breech right in front of the extractor. |
$7.50 CLICK HERE for More Info or to Order
|
0 |
p156 |
|
This is the Finger lever bushing Winchester 1886. ORIGINAL This bushing is what raises the locking bolts up. It is also what attaches the... |
$46.00 CLICK HERE for More Info or to Order |
6 |
p116 |
|
This is the finger lever bushing pin Winchester 1886.NEW This split pin secures the bushing in place. One Forearm of the pin sits in one locking bolt... |
$29.00 CLICK HERE for More Info or to Order
|
0 |
wp168-b wop |
|
Finger Lever catch spring ORIGINAL for all Winchester 1873 guns. |
$32.00 CLICK HERE for More Info or to Order
|
0 |
wp168-a wop |
|
Finger Lever catch pin ORIGINAL for the Winchester 1873. This small pointed pin inserts through the finger-lever latch post and holds the... |
$6.40 CLICK HERE for More Info or to Order
|
0 |
p120 |
|
This pin sits in the goove on the finger lever latch spring and holds the finger lever latch on to the receiver Winchester 1873 3rd model. And on... |
$4.50 CLICK HERE for More Info or to Order |
57 |
wp168-c wop |
|
This is an ORIGINAL finger lever latch (also called the finger lever catch) Winchester 1873 2nd and 3rd model. It fits all 1876 model... |
$56.00 CLICK HERE for More Info or to Order
|
0 |
p166 |
|
This is the finger lever link pin Winchester 1895. It is a split pin that connects the top part of the loop on the finger lever to the rest of the... |
$6.25 CLICK HERE for More Info or to Order
|
-1 |
p167 |
|
This is the finger lever lock jointvpin Winchester 1895. It is the smaller of the two split pins on the type 3 finger lever. It connects the bottom... |
$8.75 CLICK HERE for More Info or to Order
|
0 |
s9-b |
|
NEW Screw for Finger lever Stevens Favorite 22 rifle. Late production 1915 version with a thin (0.065") head. - also Breech bolt screw... |
$6.75 CLICK HERE for More Info or to Order |
13 |
s9-a |
|
Screw NEW for Finger lever Stevens Favorite 22 rifle. This screwfits early production rifles, and has a thick head (0.95")-with strong threads. |
$6.75 CLICK HERE for More Info or to Order |
7 |
p146 |
|
Fits Winchester model 1894/64/55 and Winchester 1892/65/53. This is the pin that goes through the Forearm of the finger lever and attaches it to the... |
$5.75 CLICK HERE for More Info or to Order
|
0 |
p114 |
|
This is the finger lever pin joins the tip of the lever to the bolt. It provides a pivot lever to move the bolt back and forth on the Winchester 1886... |
$5.25 CLICK HERE for More Info or to Order |
2 |
p135 |
|
This is the finger lever PIN Winchester 1895. This is the pin that holds the Forearm of the finger lever into the bolt. |
$4.25 CLICK HERE for More Info or to Order
|
0 |
p125 |
|
This is the pin that holds the finger lever into the receiver of the Winchester 1873 rifles. This pin goes through the receiver and finger lever and... |
$3.50 CLICK HERE for More Info or to Order
|
0 |
p128 |
|
This is the pin that attaches the finger lever to the link on the Winchester 1876 lever action rifle. |
$6.50 CLICK HERE for More Info or to Order
|
0 |
p134 |
|
This pin retains the firing pin in the breechbolt on the Winchester 1895 |
$4.15 CLICK HERE for More Info or to Order
|
0 |
s99-b sop |
|
Firing Pin Retainer Screw model 44 Stevens |
$4.75 CLICK HERE for More Info or to Order
|
0 |
p121 |
|
This is the pin that holds the Winchester 1873 .22 cal firing pin, or piston to the breech bolt. The firing pin set up was different on the .22 cals... |
$4.15 CLICK HERE for More Info or to Order |
21 |
wp118 |
|
This is the Firing Pin Retracting Plunger Winchester model 61 pump .22 |
$3.50 CLICK HERE for More Info or to Order
|
0 |
p101 |
|
This pin fits the Winchester model 62 or 62A. 2 pins located on the left side of bolt, go down through the firing pin stop to hold... |
$4.75 CLICK HERE for More Info or to Order
|
0 |
p161 |
|
This is the firing pin stop pin Winchester model 62 pump .22 |
$4.25 CLICK HERE for More Info or to Order |
15 |
p106 |
|
This is the firing pin stop pin Winchester model 63 and 1903. The pin holds the firing pin in place on the model 63 and on the model 1903, this pin... |
$3.45 CLICK HERE for More Info or to Order
|
0 |
p144 |
|
This is the Firing pin striker stop pin Winchester 1894 and model 64 and model 55 . This is not a solid pin alloWinchesterg it to be press-fitted... |
$2.25 CLICK HERE for More Info or to Order |
9 |
wp112 |
|
These are the screws that securen the forearm cap of the Winchester model 63 and 1903 to the tenon attached to the underside of the barrel. They have... |
$4.50 CLICK HERE for More Info or to Order |
38 |
wp349-a wop |
|
These are ORIGINAL screws that secure the forearm cap of the Winchester model 63 and 1903 to the tenon attached to the underside dovetail of the... |
$5.75 CLICK HERE for More Info or to Order
|
0 |
c101-b |
|
This is the screw that holds on the forearm cap Winchester model 94 POST 64 for the COMMEMARATIVE one screw style Fore arm cap (e.g.,... |
$9.50 CLICK HERE for More Info or to Order |
11 |
s7-b short |
|
Screw for 6" Forearm on a Stevens Favorite. The screw fits Favorite MODELS 1889, 1894, AND 1915. This screw holds the 6" wood... |
$9.50 CLICK HERE for More Info or to Order |
13 |
s7-a long |
|
Screw for the later and longer 8" Forearm on a Stevens Favorite. The screw fits forearm to the barrel in Favorite later MODELS that have... |
$9.50 CLICK HERE for More Info or to Order |
13 |
p147 |
|
This is the little pin that holds the friction stud in place on the finger lever of the Winchester 1892 lever action rifle |
$4.25 CLICK HERE for More Info or to Order |
6 |
p142 |
|
This is the friction stud stop pin Winchester 1894, model 64 and model 55. It slides into the groove cut into the friction stud (wp158 and holds the... |
$2.25 CLICK HERE for More Info or to Order |
81 |
p155 |
|
This is the friction stud Winchester 189 a nd mod 53. This little stud has a spring behind it (part number wp566) and a pin (p147) that holds it into... |
$6.00 CLICK HERE for More Info or to Order
|
0 |
wp580 |
|
This is the front guard screw Winchester model 70 pre 64. Also called the magazine cover hinge polate screw. |
$4.00 CLICK HERE for More Info or to Order |
95 |
wp578 |
|
This is the middle guard screw Winchester model 70 pre 64. |
$4.00 CLICK HERE for More Info or to Order |
96 |
wp579 |
|
This is the rear guard screw Winchester model 70 pre 64. |
$4.80 CLICK HERE for More Info or to Order |
94 |
wp167-a wop |
|
This is an ORIGINAL Hammer PIN Winchester 1873. If you prefer to have a new PIN please see part number p124. Note: after approximately serial number... |
$9.50 CLICK HERE for More Info or to Order |
3 |
p157 wop |
|
Hammer Pin model 63 Winchester ORIGINAL - also fits the 1903 Winchester. |
$5.25 CLICK HERE for More Info or to Order |
8 |
p124 |
|
This is the pin that holds the hammer in place on the Winchester model 1873 |
$4.05 CLICK HERE for More Info or to Order |
43 |
p136 wop |
|
This is the pin that hold the hammer in place on the Winchester model 61 |
$4.25 CLICK HERE for More Info or to Order |
10 |
s12-b |
|
This is a NEW thick head Screw for the Hammer/trigger on 1889/1894 Stevens Favorite rifles. The head is 0.095 inches thick |
$3.25 CLICK HERE for More Info or to Order |
20 |
s129-b sop |
|
Screw ORIGINAL for the Hammer on a Stevens Marksman 12 and the Model 101. |
$5.25 CLICK HERE for More Info or to Order |
1 |
s93-b sop |
|
Hammer Screw Stevens model 44 rolling block rifle. |
$5.50 CLICK HERE for More Info or to Order
|
0 |
p113 |
|
This is the pin that holds the hammer spring (mainspring) abutment in place on the later production Winchester model 62A rifles. This pin goes right... |
$4.25 CLICK HERE for More Info or to Order |
30 |
p152 wop |
|
This is a NEW pin for the hammer spring (mainspring) abutment on the Winchester model 63 and 1903 |
$3.50 CLICK HERE for More Info or to Order |
9 |
p137 wop |
|
This is the pin that hold the hammer spring (mainspring) guide rod in place. |
$3.25 CLICK HERE for More Info or to Order |
2 |
p148 |
|
This is the pin that holds the stirrup (part number 513) onto the hammer Winchester 1873 1892 1894 lever action rifles. |
$4.50 CLICK HERE for More Info or to Order
|
0 |
p104 |
|
This is the pin that holds the stirrup onto the hammer. The stirrup is what the mainspring (or hammer spring (mainspring)) attaches to putting... |
$3.25 CLICK HERE for More Info or to Order |
30 |
s127-b sop |
|
Screw ORIGINAL for the Joint between the frame and the barrel sleeve on a Stevens Marksman 12 AND mODEL 101. |
$16.25 CLICK HERE for More Info or to Order
|
0 |
T767 |
|
One of the most effective lubricating and penetrating oils, that flows into the tiniest of crevices. This is the penetrating oil of choice... |
$23.50 CLICK HERE for More Info or to Order
|
0 |
s128-c sop |
|
PIN for the Link on a Stevens Marksman 12 and 101 rifle ORIGINAL part |
$9.50 CLICK HERE for More Info or to Order |
3 |
p141 |
|
This is the pin that secures the link to the bottom front of the receiver on the Winchester 1894 and model 64 and model 55 . The lateral groove in... |
$6.50 CLICK HERE for More Info or to Order |
8 |
s128-b sop |
|
Screw for the Link on a Stevens Marksman 12 and 101 rifle ORIGINAL part. This screw holds the link attached to the fingert lever. |
$12.50 CLICK HERE for More Info or to Order
|
0 |
s10-b1 sop |
|
Link PIN for the Stevens Favorite - and ORIGINAL Stevens part for the mid- and later-production Favorites. This pin holds the link in the... |
$4.50 CLICK HERE for More Info or to Order |
4 |
wp71-f |
|
Spring cover screw Winchester 1892 , 1894 , 1873 lever action. It also fits Winchester model 65, 66, 55, 53,1876 and model 53. This screw... |
$3.75 CLICK HERE for More Info or to Order |
308 |
p169-b wop |
|
This is an ORIGINAL locking bolt pin stop screw Winchester 1892, 65 and model 53. It secures the locking bolt pin in place to prevent it from backing... |
$9.75 CLICK HERE for More Info or to Order
|
0 |
p132 |
|
This is the locking bolt pin Winchester 1892, model 65 and 53. This pin connects the left and right locking bolts with the finger lever. It has a cut... |
$22.75 CLICK HERE for More Info or to Order |
23 |
p149-a wop |
|
This is an ORIGINAL locking bolt pin Winchester 1892, model 65 and 53. This pin connects the left and right locking bolts with the finger lever. It... |
$25.50 CLICK HERE for More Info or to Order |
8 |
wp726 pin |
|
This pin goes through the base of the Magazine Hanger (magazine ring) (part number 726) and holds the outer magazine tube from sliding out. This part... |
$3.65 CLICK HERE for More Info or to Order |
16 |
wp727-a pin |
|
This is the pin that holds the hanger on the Winchester model 1886 lever action rifle. |
$3.10 CLICK HERE for More Info or to Order |
25 |
wp723 pin |
|
This is the pin the holds the magazine tight against the rear Magazine Hanger (magazine ring). It slides into a hole in the base of the rear mag... |
$2.25 CLICK HERE for More Info or to Order |
250 |
wp473 |
|
This is the pin that holds the magazine plug in on the inner magazine tube Winchester model 63 |
$4.25 CLICK HERE for More Info or to Order |
9 |
p151-a wop |
|
This is the pin that holds in the magazine plug to the inner mag tube Winchester model 63 |
$4.50 CLICK HERE for More Info or to Order |
4 |
wp728 pin |
|
This is the pin magazine ring on the 1873 and 1892 lever action Winchester rifle using 25-20/32-20 cal. |
$2.85 CLICK HERE for More Info or to Order |
34 |
s132-c sop |
|
Mainspring Plunger SCREW for Stevens Marksman 12 and 101 rifle ORIGINAL |
$9.00 CLICK HERE for More Info or to Order
|
0 |
s11-b sop |
|
Screw for securing the Mainspring of a Stevens Favorite ORIGINAL |
$5.95 CLICK HERE for More Info or to Order |
3 |
s39-b sop |
|
Screw for securing the Mainspring of a Stevens 16 Crackshot ORIGINAL |
$4.95 CLICK HERE for More Info or to Order
|
0 |