| Item Id |
Product Image |
Item Name |
Price |
Quantity |
s118-a |
|
Mainspring sSCREW for the Stevens Favorite that has mainspring with hole. This part was used in the late 1894 Stevens Favorite rifles... |
$5.95
CLICK HERE
for More Info
or to Order |
1 |
wp47 |
|
This screw holds the main spring (hammer spring (mainspring)) in place. The screw goes through the lower tang and is attached to the anterior portion... |
$3.65
CLICK HERE
for More Info
or to Order |
51 |
wp58 |
|
This screw provides tension to the main spring (hammer spring (mainspring)) resulting in more pressure when the hammer strikes the firing pin when... |
$3.85
CLICK HERE
for More Info
or to Order |
325 |
p164 wop |
|
This is an original pin that holds the magazine plug on a Winchester 1890, 1906, 62 in the inner magazine tube |
$4.25
CLICK HERE
for More Info
or to Order |
3 |
T722-a |
|
A MUST for anyone removing pins from guns - a Grace 4 piece BRASS starter Pin Punch Set that starts the pins for removal from their holes. ... |
$25.00
CLICK HERE
for More Info
or to Order
|
0 |
p126 |
|
This is the safety catch pin Winchester 1873, 1894 and 1876 lever action rifle. This pin holds the safety bar in the lower tang (also called trigger... |
$3.25
CLICK HERE
for More Info
or to Order |
29 |
p133 |
|
The sear pin will fit both type 1 and Type 2 recievers on the Winchester model 1895 |
$4.50
CLICK HERE
for More Info
or to Order |
6 |
wp1294-b wop |
|
Sear Spring Screw Winchester 1897 |
$3.75
CLICK HERE
for More Info
or to Order
|
0 |
wp605-b |
|
This is the screw that holds on the side plate on the FIRST and second model Winchester 1873. This only fits rifles that have a serial number below... |
$9.45
CLICK HERE
for More Info
or to Order |
18 |
wp613 |
|
This screw attaches the lower tang to the main receiver on the rifle. There is one screw on each side. On the 2nd model lower tang the... |
$3.25
CLICK HERE
for More Info
or to Order |
6 |
wp601-b |
|
This is the receiver side tang screw FIRST model 1873. This screw attatches the lower receiver tang to the main frame on the rifle. The length is... |
$6.00
CLICK HERE
for More Info
or to Order |
11 |
wp515 wop |
|
The is the bolt Winchester model 61 that attaches the stock to the reciever |
$8.50
CLICK HERE
for More Info
or to Order
|
0 |
s88 sop |
|
Stock ORIGINALTang Screw -- for the Upper and Lower tang on a Stevens model 70 and late Favorite rifles. This is a wood screw that goes through... |
$12.95
CLICK HERE
for More Info
or to Order
|
0 |
wp23-a wop |
|
This is AN ORIGINAL takedown screw (also called the assembly screw) for the Winchester model 1903 and model 63. The stop pin for this part is p110... |
$43.50
CLICK HERE
for More Info
or to Order
|
0 |
wp561 wop |
|
This is the bushing that the takedown screw goes through on the Winchester model 63 and 1903 rifle. |
$10.25
CLICK HERE
for More Info
or to Order
|
0 |
wp153-a wop |
|
Takedown screw lock ORIGINAL model 1903 and only the very early 63 Winchester rifles. |
$12.00
CLICK HERE
for More Info
or to Order |
6 |
p160 |
|
This is the pin that holds the assembly screw lock in place on the model 1903 and very early 63 Winchester |
$2.50
CLICK HERE
for More Info
or to Order |
25 |
wp153-b wop |
|
Takedown screw lock plunger spring ORIGINAL model 1903 and early 63 Winchester semiautomatic rifles. |
$2.50
CLICK HERE
for More Info
or to Order |
4 |
s112-a |
|
Tang PLUG Screw on a Stevens model 70 , Favorite, Ideal, Marksman and other models that can have tang sights |
$6.95
CLICK HERE
for More Info
or to Order |
26 |
wp40 |
|
This is the tang screw (also called the stock screw) Winchester 1890 and 1906 and model 62, 62A. This screw holds the stock to the receiver. |
$5.75
CLICK HERE
for More Info
or to Order |
238 |
wp622-b |
|
This is the tang screw also called stock screw Winchester model 64 rifle and 1887 lever action shotgun. This screw holds the stock onto the receiver. |
$9.95
CLICK HERE
for More Info
or to Order |
1 |
wp520 |
|
Tang Screw custom made extra LONG so it can be fit to any number of Winchester Lever Action rifles. It retains all... |
$8.25
CLICK HERE
for More Info
or to Order |
306 |
s71-b sop |
|
Stock screw for Stevens Crackshot. The upper tang and lower tang screw are the same size so two are needed to attach the receiver to the stock for... |
$9.00
CLICK HERE
for More Info
or to Order
|
0 |
wp23-b |
|
This is the tang screw (stock screw) Winchester 1906 EXPERT and the very rare 1890 pistol grip pump THAT IS USED TO ATTACH A TANG SIGHT. The screw... |
$8.25
CLICK HERE
for More Info
or to Order |
16 |
wp66-b |
|
This is the tang screw (stock screw) Winchester 1890 Special or the 1906 EXPERT pump .22. It is longer than a standard tang screw, and attaches the... |
$6.50
CLICK HERE
for More Info
or to Order |
39 |
wp160-b wop |
|
This is an ORIGINAL Plug screw that fits into the upper tang on the 1890 or 1906, 1903, 62, 62A, 63 1866 1873 1876 1892 1894 1886 1895, model 53 and... |
$4.75
CLICK HERE
for More Info
or to Order
|
0 |
s118-b |
|
Lower Tang WOOD Screw on a Stevens model 70 , Favorite and other models that have wood screws for tang attachment |
$5.95
CLICK HERE
for More Info
or to Order |
33 |
p123 |
|
Both the front and rear toggle link pins were the same dimention Winchester 1873. This pin will fit the front or the rear of the toggle links |
$4.25
CLICK HERE
for More Info
or to Order |
449 |
p129 |
|
This is the toggle Link pin Winchester 1876. This pin slides along the grooves cut out on the sides of the toggle links. Front and rear pins are the... |
$5.25
CLICK HERE
for More Info
or to Order
|
0 |
wp169-a wop |
|
Toggle Link Pin ORIGINAL for all Winchester 1873 rifles. |
$9.95
CLICK HERE
for More Info
or to Order
|
0 |
p122 |
|
This is the pin that holds the trigger and sear in place on the Winchester model 1873 lower tang. Up to serial number 28,000 this pin was inside of... |
$3.25
CLICK HERE
for More Info
or to Order |
34 |
p122-x |
|
This is the pin Winchester 1892 and 1894 that holds in the trigger and sear in the lower tang. The Winchester 1892 uses a 1 piece trigger and sear so... |
$3.45
CLICK HERE
for More Info
or to Order
|
0 |
wp302-a wop |
|
This is an ORIGINAL trigger guard screw for Winchester models 1900, 1902, 1904, 58, 67, 67A, 68, 69, 69A, 72 and 59. There are 2 screws needed... |
$5.75
CLICK HERE
for More Info
or to Order |
8 |
p172 |
|
This is the PIN for the trigger on a Winchester 1886 lever action rifle. The pin holds the trigger into the tang on the 1886 rifle and carbine. |
$6.50
CLICK HERE
for More Info
or to Order |
10 |
p112 |
|
This is the pin that holds the trigger in place on the Winchester 1890, 1906 , 62, 62A |
$4.50
CLICK HERE
for More Info
or to Order |
5 |
wp330 wop |
|
ORIGINAL Winchester 1900, 1902, 59 trigger pin - also fits model 36. This pin goes completely through the stock and holds the trigger in place.... |
$9.00
CLICK HERE
for More Info
or to Order |
7 |
wp316-a wop |
|
Trigger pin ORIGINAL model 1904, 58, 60 and 60A Winchester single shot rifles. This pin fits sideways through the trigger and entire stock on the... |
$12.75
CLICK HERE
for More Info
or to Order |
19 |
p159 wop |
|
Trigger Pin Winchester model 63 - 1903. This in goes through the trigger guard and secures the trigger in place. |
$2.50
CLICK HERE
for More Info
or to Order
|
0 |
s111-c sop |
|
Trigger SCREW for a Stevens Marksman 12 and 101. Also fits little scout and late Stevens Favorite triggers ORIGINAL |
$5.25
CLICK HERE
for More Info
or to Order |
1 |
s95-b sop |
|
TRIGGER SCREW model 44 Stevens. This is an ORIGINAL Stevens part. |
$4.95
CLICK HERE
for More Info
or to Order
|
0 |
s13-b sop |
|
This is an ORIGINAL Trigger SCREW for the early Stevens Favorite rifle. The trigger Screw is for securing the Trigger of a Stevens Favorite... |
$5.95
CLICK HERE
for More Info
or to Order
|
0 |
s14-b |
|
Screw that holds the trigger spring in place on a Stevens Favorite. This is a QUALITY NEW part. Also fits the trigger spring on the... |
$4.50
CLICK HERE
for More Info
or to Order |
5 |
s96-b sop |
|
Trigger Spring screw model 44 Stevens. This is an ORIGINAL Stevens part. |
$4.75
CLICK HERE
for More Info
or to Order |
1 |
s42-b sop |
|
Screw that holds the trigger spring in place on a Stevens Crackshot. This is an ORIGINAL part. Also fits Crackshot, Ideal, late Favorite,... |
$3.50
CLICK HERE
for More Info
or to Order |
7 |
