Item Id- |
Origin |
Product Image |
Item Name |
Price |
Quantity |
p149-a wop |
Winchester Original Part |
|
This is an ORIGINAL locking bolt pin Winchester 1892, model 65 and 53. This pin connects the left and right locking bolts with the finger lever. It... |
$25.50 CLICK HERE for More Info or to Order |
3 |
p148 |
|
|
This is the pin that holds the stirrup (part number 513) onto the hammer Winchester 1873 1892 1894 lever action rifles. |
$4.50 CLICK HERE for More Info or to Order |
2 |
p147 |
|
|
This is the little pin that holds the friction stud in place on the finger lever of the Winchester 1892 lever action rifle |
$4.25 CLICK HERE for More Info or to Order |
6 |
p146 |
|
|
Fits Winchester model 1894/64/55 and Winchester 1892/65/53. This is the pin that goes through the Forearm of the finger lever and attaches it to the... |
$5.75 CLICK HERE for More Info or to Order |
14 |
p145 |
|
|
This is the extractor pin that fits the Winchester model 1894 , 64, 55. and 1892 . This is also the pin that is used on the 1894 and 1895... |
$3.25 CLICK HERE for More Info or to Order |
32 |
p144 |
|
|
This is the Firing pin striker stop pin Winchester 1894 and model 64 and model 55 . This is not a solid pin alloWinchesterg it to be press-fitted... |
$2.25 CLICK HERE for More Info or to Order |
23 |
p143 |
|
|
This is the ejector stop pin Winchester 1894 (pre 64). The ejector stop pin hole is 3/64 inches behind the front of the ejector. The pin is flush... |
$4.50 CLICK HERE for More Info or to Order |
7 |
p142 |
|
|
This is the friction stud stop pin Winchester 1894, model 64 and model 55. It slides into the groove cut into the friction stud (wp158 and holds the... |
$2.25 CLICK HERE for More Info or to Order |
86 |
p141 |
|
|
This is the pin that secures the link to the bottom front of the receiver on the Winchester 1894 and model 64 and model 55 . The lateral groove in... |
$6.50 CLICK HERE for More Info or to Order |
27 |
p140 |
Winchester Original Part |
|
This is the pin that holds the ejector in on the Winchester model 61 |
$3.45 CLICK HERE for More Info or to Order |
6 |
p139 |
|
|
This is the carrier stop pin Winchester model 61 |
$3.25 CLICK HERE for More Info or to Order |
5 |
p138 wop |
Winchester Original Part |
|
This is the carrier plunger pin Winchester model 61 |
$3.45 CLICK HERE for More Info or to Order |
2 |
p137 wop |
Winchester Original Part |
|
This is the pin that hold the hammer spring (mainspring) guide rod in place. |
$3.25 CLICK HERE for More Info or to Order |
4 |
p136 wop |
Winchester Original Part |
|
This is the pin that hold the hammer in place on the Winchester model 61 |
$4.25 CLICK HERE for More Info or to Order |
10 |
p135 |
|
|
This is the finger lever PIN Winchester 1895. This is the pin that holds the Forearm of the finger lever into the bolt. |
$4.25 CLICK HERE for More Info or to Order
|
0 |
p134 |
|
|
This pin retains the firing pin in the breechbolt on the Winchester 1895 |
$4.15 CLICK HERE for More Info or to Order |
1 |
p133 |
|
|
The sear pin will fit both type 1 and Type 2 recievers on the Winchester model 1895 |
$4.50 CLICK HERE for More Info or to Order |
6 |
p132 |
|
|
This is the locking bolt pin Winchester 1892, model 65 and 53. This pin connects the left and right locking bolts with the finger lever. It has a cut... |
$22.75 CLICK HERE for More Info or to Order |
9 |
p131 |
|
|
This is the cartridge stop pin Winchester model 1892. It fits all callibers |
$3.25 CLICK HERE for More Info or to Order |
78 |
p130 |
|
|
This is the pin cartridge cut off on the Winchester model 61. It is also lower extractor |
$3.75 CLICK HERE for More Info or to Order |
1 |
p129 |
|
|
This is the toggle Link pin Winchester 1876. This pin slides along the grooves cut out on the sides of the toggle links. Front and rear pins are the... |
$5.25 CLICK HERE for More Info or to Order
|
0 |
p128 |
|
|
This is the pin that attaches the finger lever to the link on the Winchester 1876 lever action rifle. |
$6.50 CLICK HERE for More Info or to Order
|
0 |
p127 |
|
|
The is the extractor pin Winchester 1876 all cals. |
$4.15 CLICK HERE for More Info or to Order |
14 |
p126 |
|
|
This is the safety catch pin Winchester 1873, 1894 and 1876 lever action rifle. This pin holds the safety bar in the lower tang (also called trigger... |
$3.25 CLICK HERE for More Info or to Order |
30 |
p125 |
|
|
This is the pin that holds the finger lever into the receiver of the Winchester 1873 rifles. This pin goes through the receiver and finger lever and... |
$3.50 CLICK HERE for More Info or to Order |
3 |
p124 |
|
|
This is the pin that holds the hammer in place on the Winchester model 1873 |
$4.05 CLICK HERE for More Info or to Order |
47 |
p123 |
|
|
Both the front and rear toggle link pins were the same dimention Winchester 1873. This pin will fit the front or the rear of the toggle links |
$4.25 CLICK HERE for More Info or to Order |
461 |
p122-x |
|
|
This is the pin Winchester 1892 and 1894 that holds in the trigger and sear in the lower tang. The Winchester 1892 uses a 1 piece trigger and sear so... |
$3.45 CLICK HERE for More Info or to Order |
1 |
p122 |
|
|
This is the pin that holds the trigger and sear in place on the Winchester model 1873 lower tang. Up to serial number 28,000 this pin was inside of... |
$3.25 CLICK HERE for More Info or to Order |
37 |
p121 |
|
|
This is the pin that holds the Winchester 1873 .22 cal firing pin, or piston to the breech bolt. The firing pin set up was different on the .22 cals... |
$4.15 CLICK HERE for More Info or to Order |
23 |
p120 |
|
|
This pin sits in the goove on the finger lever latch spring and holds the finger lever latch on to the receiver Winchester 1873 3rd model. And on... |
$4.50 CLICK HERE for More Info or to Order |
65 |
p119 |
|
|
This is the extractor pin Winchester 1873 large .38 and .44 cal extractor. |
$3.50 CLICK HERE for More Info or to Order |
7 |
p118 |
|
|
This is the pin that holds the .32 cal extractor onto the top of the breech bolt on the Winchester .32 cal 1873 Rifles. |
$3.50 CLICK HERE for More Info or to Order |
8 |
p117 |
|
|
This is the pin that holds the .22 cal extractor onto the top of the breech bolt on the Winchester .22 cal 1873 Rifle. |
$3.50 CLICK HERE for More Info or to Order |
16 |
p116 |
|
|
This is the finger lever bushing pin Winchester 1886.NEW This split pin secures the bushing in place. One Forearm of the pin sits in one locking bolt... |
$22.00 CLICK HERE for More Info or to Order
|
0 |
p114 |
|
|
This is the finger lever pin joins the tip of the lever to the bolt. It provides a pivot lever to move the bolt back and forth on the Winchester 1886... |
$5.25 CLICK HERE for More Info or to Order
|
0 |
p113 |
|
|
This is the pin that holds the hammer spring (mainspring) abutment in place on the later production Winchester model 62A rifles. This pin goes right... |
$4.25 CLICK HERE for More Info or to Order |
30 |
p112 |
|
|
This is the pin that holds the trigger in place on the Winchester 1890, 1906 , 62, 62A |
$4.50 CLICK HERE for More Info or to Order
|
0 |
p111 |
|
|
This extractor pin is used on the Winchester models 1890, 1906, 62 and 62A. It goes in to0 the top of the bolt on the right side and down... |
$3.50 CLICK HERE for More Info or to Order |
36 |
p110 |
|
|
This is the tiny little pin that goes into the end of the assembly screw (take down screw) on the Winchester 1890 - 1906, mod 62 and also fits... |
$2.55 CLICK HERE for More Info or to Order |
37 |
p108 |
|
|
This is the pin that holds the carrier lever to the carrier on the Winchester 1890, 1906, 62 or 62A |
$4.25 CLICK HERE for More Info or to Order |
14 |
p107 |
|
|
This is the pin that holds the cartridge stop (wp3A) in the carrier of the Winchester 1906 and 62 or 62A. If you have a carrier that only holds the... |
$3.75 CLICK HERE for More Info or to Order |
6 |
p106 |
Winchester Original Part |
|
This is the firing pin stop pin Winchester model 63 and 1903. The pin holds the firing pin in place on the model 63 and on the model 1903, this pin... |
$3.45 CLICK HERE for More Info or to Order |
1 |
p104 |
|
|
This is the pin that holds the stirrup onto the hammer. The stirrup is what the mainspring (or hammer spring (mainspring)) attaches to putting... |
$3.25 CLICK HERE for More Info or to Order |
31 |
p101 |
|
|
This pin fits the Winchester model 62 or 62A. 2 pins located on the left side of bolt, go down through the firing pin stop to hold... |
$4.75 CLICK HERE for More Info or to Order
|
0 |
c101-b |
Winchester Original Part |
|
This is the screw that holds on the forearm cap Winchester model 94 POST 64 for the COMMEMARATIVE one screw style Fore arm cap (e.g.,... |
$9.50 CLICK HERE for More Info or to Order |
17 |