Item Id |
Origin+ |
Product Image |
Item Name |
Price |
Quantity |
set Scope |
|
|
If your rifle previously had a receiver mounted sight or scope it most likely used these holes. The screws that were used to hold the mount onto the... |
CLICK HERE for More Info or to Order |
184 |
set 1894-r |
|
|
This discounted set consists of all of the external screws on the Winchester 1894 RIFLE. (if you have 2 barrel bands that hold on forearm and... |
$39.50 CLICK HERE for More Info or to Order |
251 |
set1886-c |
|
|
This discounted set consists of all of the external screws on the Winchester 1886 and lever action CARBINE (if you have a Forearm cap that uses 2... |
$38.75 CLICK HERE for More Info or to Order |
53 |
set1886-r |
|
|
This discounted set consists of all of the external screws on the Winchester 1886 lever-action RIFLE (if you have 2 barrel bands that hold on forearm... |
$32.50 CLICK HERE for More Info or to Order |
13 |
set9006-spec |
|
|
This discounted set consists of all of the external screws on the Winchester 1890 Deluxe and 1906 Expert (Both have pistol grip stocks) IF YOU HAVE A... |
$31.50 CLICK HERE for More Info or to Order |
18 |
set1892-c |
|
|
This discounted set consists of all of the external screws on the Winchester 1892 CARBINE. (if you have a Forearm cap that uses 2 screws to hold the... |
$38.50 CLICK HERE for More Info or to Order |
15 |
set94post-c |
|
|
This is a discounted external screw set Winchester model 94 POST 64 Top eject Carbine. Your serial number should be from approximately 2,700,000 -... |
$55.75 CLICK HERE for More Info or to Order |
76 |
set62 |
|
|
This set consists of all of the external screws on the Winchester model 62 .22 cal rifle. Quite often, non-hollow ground screwdrivers are... |
$22.00 CLICK HERE for More Info or to Order |
39 |
set70 guard |
|
|
There are three guard screws on the Winchester model 70 pre 64: Front, Middle and Rear. All Three screws are included in this set. wp578... |
$12.95 CLICK HERE for More Info or to Order |
29 |
set1873-c1 |
|
|
This is a discounted external screw set Winchester 1873 1ST (FIRST) model lever action CARBINE. (If your gun has a Forearm CAP rather than a barrel... |
$73.25 CLICK HERE for More Info or to Order |
63 |
set1873-r1 |
|
|
This is a discounted external screw set Winchester 1873 1ST (FIRST) model lever action RIFLE. (If your gun has a barrel band rather than a forearm... |
$72.25 CLICK HERE for More Info or to Order |
39 |
set1873-c2 |
|
|
This is a discounted external screw set Winchester 1873 2nd (SECOND) model lever action CARBINE. (If your gun has a FORForearm CAP rather than a... |
$71.75 CLICK HERE for More Info or to Order |
56 |
set1873-r2 |
|
|
This is a discounted external screw set Winchester 1873 2nd (SECOND) lever action RIFLE. (If your gun has a barrel band rather than a forearm cap... |
$69.75 CLICK HERE for More Info or to Order |
41 |
set1873-c3 |
|
|
This is a discounted external screw set Winchester 1873 3rd (THIRD) model lever action CARBINE. (If your gun has a Forearm CAP rather than a barrel... |
$67.50 CLICK HERE for More Info or to Order |
42 |
set1873-r3 |
|
|
This is a discounted screw set Winchester 1873 3rd/ THIRD model lever action RIFLE. (If your gun has a barrel band rather than a forearm cap that... |
$63.25 CLICK HERE for More Info or to Order |
4 |
set1876-r |
|
|
This is an external screw set Winchester 1876 lever-action rifle. All screws are machined here in the U.S. to Winchester factory specs. Each screw is... |
$51.00 CLICK HERE for More Info or to Order |
43 |
set1892-r |
|
|
This discounted set consists of all of the external screws on the Winchester 1892 RIFLE. (if you have 2 barrel bands that hold on forearm and... |
$38.50 CLICK HERE for More Info or to Order |
982 |
set 1894-c |
|
|
This discounted set consists of all of the external screws on the Winchester 1894 CARBINE made before 1964. (if you have a forForearm cap that uses 2... |
$39.50 CLICK HERE for More Info or to Order |
183 |
set1895-c |
|
|
This is a discounted external screw set Winchester 1895 lever action CARBINE. (If your gun has a screw on the underside of your FORForearm rather... |
$46.56 CLICK HERE for More Info or to Order |
27 |
wp43 |
|
|
Action slide handle (Forearm) screw for Winchester 1890 pump 22. This screw will fit all three models (1st 2nd and 3rd) of the 1890 and all 1906... |
$3.85 CLICK HERE for More Info or to Order |
208 |
wp41 |
|
|
This is the forearms screw also called the action slide handle screw. This is the screw that holds on the wooden forearm on the model 61 Winchester... |
$3.85 CLICK HERE for More Info or to Order |
198 |
p110 |
|
|
This is the tiny little pin that goes into the end of the assembly screw (take down screw) on the Winchester 1890 - 1906, mod 62 and also fits... |
$2.55 CLICK HERE for More Info or to Order |
37 |
wp48-a |
|
|
Takedown (Assembly)replacement (NEW) screw for either a Winchester 1890 - 1906 - 62 - 62A pump 22 rifle. This secures receiver to the trigger... |
$22.45 CLICK HERE for More Info or to Order |
9 |
s29-a |
|
|
A NEW Barrel (takedown) Screw for Stevens Crackshot (model 26 ) |
$23.00 CLICK HERE for More Info or to Order |
5 |
s30-b |
|
|
An ORIGINAL Screw for the Breech Block on a Stevens Crackshot. This screw goes across the receiver and holds the breech-block in place. |
$5.49 CLICK HERE for More Info or to Order |
6 |
p170 |
|
|
In 1935 Winchester changed its locking system from using the protrusion on the firing pin as the breech bolt lock to this new system. If you... |
$11.50 CLICK HERE for More Info or to Order |
6 |
wp57 |
|
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.95 CLICK HERE for More Info or to Order |
731 |
wp349-a |
|
|
These are NEW BUTTPLATE SCREWS for THE 1903 AND 63 Winchester metal buttplate. These screws are shorter screw so they will not split the... |
$6.25 CLICK HERE for More Info or to Order |
37 |
wp69 |
|
|
Buttplate screw Winchester 1906, along with the Remington .22 rifles, Marlin and Stevens 22 rifles. These screws are one inch long with the FLAT... |
$3.20 CLICK HERE for More Info or to Order
|
0 |
wp64-b1 |
|
|
This is the screw that attaches the Spring brass trap door on the buttplate of the Winchester 1866, 1876 and 1873 lever action rifles. The... |
$4.50 CLICK HERE for More Info or to Order |
25 |
p108 |
|
|
This is the pin that holds the carrier lever to the carrier on the Winchester 1890, 1906, 62 or 62A |
$4.25 CLICK HERE for More Info or to Order |
14 |
p139 |
|
|
This is the carrier stop pin Winchester model 61 |
$3.25 CLICK HERE for More Info or to Order |
5 |
wp119 |
|
|
This is the carrier stop screw Winchester model 61 |
$4.10 CLICK HERE for More Info or to Order
|
0 |
p130 |
|
|
This is the pin cartridge cut off on the Winchester model 61. It is also lower extractor |
$3.75 CLICK HERE for More Info or to Order |
1 |
p150 |
|
|
This is the pin that holds in the cartridge cut off (wp137) Winchester model 63. |
$3.25 CLICK HERE for More Info or to Order
|
0 |
p107 |
|
|
This is the pin that holds the cartridge stop (wp3A) in the carrier of the Winchester 1906 and 62 or 62A. If you have a carrier that only holds the... |
$3.75 CLICK HERE for More Info or to Order |
6 |
p131 |
|
|
This is the cartridge stop pin Winchester model 1892. It fits all callibers |
$3.25 CLICK HERE for More Info or to Order |
78 |
p143 |
|
|
This is the ejector stop pin Winchester 1894 (pre 64). The ejector stop pin hole is 3/64 inches behind the front of the ejector. The pin is flush... |
$4.50 CLICK HERE for More Info or to Order |
7 |
p117 |
|
|
This is the pin that holds the .22 cal extractor onto the top of the breech bolt on the Winchester .22 cal 1873 Rifle. |
$3.50 CLICK HERE for More Info or to Order |
16 |
p118 |
|
|
This is the pin that holds the .32 cal extractor onto the top of the breech bolt on the Winchester .32 cal 1873 Rifles. |
$3.50 CLICK HERE for More Info or to Order |
8 |
p119 |
|
|
This is the extractor pin Winchester 1873 large .38 and .44 cal extractor. |
$3.50 CLICK HERE for More Info or to Order |
7 |
p127 |
|
|
The is the extractor pin Winchester 1876 all cals. |
$4.15 CLICK HERE for More Info or to Order |
14 |
p111 |
|
|
This extractor pin is used on the Winchester models 1890, 1906, 62 and 62A. It goes in to0 the top of the bolt on the right side and down... |
$3.50 CLICK HERE for More Info or to Order |
36 |
p145 |
|
|
This is the extractor pin that fits the Winchester model 1894 , 64, 55. and 1892 . This is also the pin that is used on the 1894 and 1895... |
$3.25 CLICK HERE for More Info or to Order |
32 |
p156 |
|
|
This is the Finger lever bushing Winchester 1886. ORIGINAL This bushing is what raises the locking bolts up. It is also what attaches the... |
$28.00 CLICK HERE for More Info or to Order
|
0 |
p116 |
|
|
This is the finger lever bushing pin Winchester 1886.NEW This split pin secures the bushing in place. One Forearm of the pin sits in one locking bolt... |
$22.00 CLICK HERE for More Info or to Order
|
0 |
p120 |
|
|
This pin sits in the goove on the finger lever latch spring and holds the finger lever latch on to the receiver Winchester 1873 3rd model. And on... |
$4.50 CLICK HERE for More Info or to Order |
65 |
p166 |
|
|
This is the finger lever link pin Winchester 1895. It is a split pin that connects the top part of the loop on the finger lever to the rest of the... |
$6.25 CLICK HERE for More Info or to Order
|
0 |
p167 |
|
|
This is the finger lever lock jointvpin Winchester 1895. It is the smaller of the two split pins on the type 3 finger lever. It connects the bottom... |
$8.75 CLICK HERE for More Info or to Order
|
0 |
s9-b |
|
|
NEW Screw for Finger lever Stevens Favorite 22 rifle. Late production 1915 version with a thin (0.065") head. - also Breech bolt screw... |
$6.75 CLICK HERE for More Info or to Order |
12 |
s9-a |
|
|
Screw NEW for Finger lever Stevens Favorite 22 rifle. This screwfits early production rifles, and has a thick head (0.95")-with strong threads. |
$6.75 CLICK HERE for More Info or to Order |
18 |
p146 |
|
|
Fits Winchester model 1894/64/55 and Winchester 1892/65/53. This is the pin that goes through the Forearm of the finger lever and attaches it to the... |
$5.75 CLICK HERE for More Info or to Order |
13 |
p114 |
|
|
This is the finger lever pin joins the tip of the lever to the bolt. It provides a pivot lever to move the bolt back and forth on the Winchester 1886... |
$5.25 CLICK HERE for More Info or to Order
|
0 |
p135 |
|
|
This is the finger lever PIN Winchester 1895. This is the pin that holds the Forearm of the finger lever into the bolt. |
$4.25 CLICK HERE for More Info or to Order
|
0 |
p125 |
|
|
This is the pin that holds the finger lever into the receiver of the Winchester 1873 rifles. This pin goes through the receiver and finger lever and... |
$3.50 CLICK HERE for More Info or to Order |
3 |
p128 |
|
|
This is the pin that attaches the finger lever to the link on the Winchester 1876 lever action rifle. |
$6.50 CLICK HERE for More Info or to Order
|
0 |
p134 |
|
|
This pin retains the firing pin in the breechbolt on the Winchester 1895 |
$4.15 CLICK HERE for More Info or to Order |
1 |
p121 |
|
|
This is the pin that holds the Winchester 1873 .22 cal firing pin, or piston to the breech bolt. The firing pin set up was different on the .22 cals... |
$4.15 CLICK HERE for More Info or to Order |
23 |
wp118 |
|
|
This is the Firing Pin Retracting Plunger Winchester model 61 pump .22 |
$3.50 CLICK HERE for More Info or to Order
|
0 |
p101 |
|
|
This pin fits the Winchester model 62 or 62A. 2 pins located on the left side of bolt, go down through the firing pin stop to hold... |
$4.75 CLICK HERE for More Info or to Order
|
0 |
p161 |
|
|
This is the firing pin stop pin Winchester model 62 pump .22 |
$4.25 CLICK HERE for More Info or to Order |
6 |
p144 |
|
|
This is the Firing pin striker stop pin Winchester 1894 and model 64 and model 55 . This is not a solid pin alloWinchesterg it to be press-fitted... |
$2.25 CLICK HERE for More Info or to Order |
22 |
wp112 |
|
|
These are the screws that securen the forearm cap of the Winchester model 63 and 1903 to the tenon attached to the underside of the barrel. They have... |
$4.50 CLICK HERE for More Info or to Order |
18 |
s7-b short |
|
|
Screw for 6" Forearm on a Stevens Favorite. The screw fits Favorite MODELS 1889, 1894, AND 1915. This screw holds the 6" wood... |
$9.50 CLICK HERE for More Info or to Order |
8 |
s7-a long |
|
|
Screw for the later and longer 8" Forearm on a Stevens Favorite. The screw fits forearm to the barrel in Favorite later MODELS that have... |
$9.50 CLICK HERE for More Info or to Order |
4 |
p147 |
|
|
This is the little pin that holds the friction stud in place on the finger lever of the Winchester 1892 lever action rifle |
$4.25 CLICK HERE for More Info or to Order |
6 |
p142 |
|
|
This is the friction stud stop pin Winchester 1894, model 64 and model 55. It slides into the groove cut into the friction stud (wp158 and holds the... |
$2.25 CLICK HERE for More Info or to Order |
86 |
p155 |
|
|
This is the friction stud Winchester 189 a nd mod 53. This little stud has a spring behind it (part number wp566) and a pin (p147) that holds it into... |
$6.00 CLICK HERE for More Info or to Order
|
0 |
wp580 |
|
|
This is the front guard screw Winchester model 70 pre 64. Also called the magazine cover hinge polate screw. |
$4.00 CLICK HERE for More Info or to Order |
96 |
wp578 |
|
|
This is the middle guard screw Winchester model 70 pre 64. |
$4.00 CLICK HERE for More Info or to Order |
98 |
wp579 |
|
|
This is the rear guard screw Winchester model 70 pre 64. |
$4.80 CLICK HERE for More Info or to Order |
97 |
p124 |
|
|
This is the pin that holds the hammer in place on the Winchester model 1873 |
$4.05 CLICK HERE for More Info or to Order |
47 |
s12-b |
|
|
This is a NEW thick head Screw for the Hammer/trigger on 1889/1894 Stevens Favorite rifles. The head is 0.095 inches thick |
$3.25 CLICK HERE for More Info or to Order |
22 |
p113 |
|
|
This is the pin that holds the hammer spring (mainspring) abutment in place on the later production Winchester model 62A rifles. This pin goes right... |
$4.25 CLICK HERE for More Info or to Order |
30 |
p148 |
|
|
This is the pin that holds the stirrup (part number 513) onto the hammer Winchester 1873 1892 1894 lever action rifles. |
$4.50 CLICK HERE for More Info or to Order |
2 |
p104 |
|
|
This is the pin that holds the stirrup onto the hammer. The stirrup is what the mainspring (or hammer spring (mainspring)) attaches to putting... |
$3.25 CLICK HERE for More Info or to Order |
31 |
T767 |
|
|
One of the most effective lubricating and penetrating oils, that flows into the tiniest of crevices. This is the penetrating oil of choice... |
$23.50 CLICK HERE for More Info or to Order |
3 |
p141 |
|
|
This is the pin that secures the link to the bottom front of the receiver on the Winchester 1894 and model 64 and model 55 . The lateral groove in... |
$6.50 CLICK HERE for More Info or to Order |
27 |
wp71-f |
|
|
Spring cover screw Winchester 1892 , 1894 , 1873 lever action. It also fits Winchester model 65, 66, 55, 53,1876 and model 53. This screw... |
$3.75 CLICK HERE for More Info or to Order |
366 |
p132 |
|
|
This is the locking bolt pin Winchester 1892, model 65 and 53. This pin connects the left and right locking bolts with the finger lever. It has a cut... |
$22.75 CLICK HERE for More Info or to Order |
9 |
wp726 pin |
|
|
This pin goes through the base of the Magazine Hanger (magazine ring) (part number 726) and holds the outer magazine tube from sliding out. This part... |
$3.65 CLICK HERE for More Info or to Order |
67 |
wp727-a pin |
|
|
This is the pin that holds the hanger on the Winchester model 1886 lever action rifle. |
$3.10 CLICK HERE for More Info or to Order |
35 |
wp723 pin |
|
|
This is the pin the holds the magazine tight against the rear Magazine Hanger (magazine ring). It slides into a hole in the base of the rear mag... |
$2.25 CLICK HERE for More Info or to Order |
318 |
wp473 |
|
|
This is the pin that holds the magazine plug in on the inner magazine tube Winchester model 63 |
$4.25 CLICK HERE for More Info or to Order |
9 |
wp728 pin |
|
|
This is the pin magazine ring on the 1873 and 1892 lever action Winchester rifle using 25-20/32-20 cal. |
$2.85 CLICK HERE for More Info or to Order |
39 |
s118-a |
|
|
Mainspring sSCREW for the Stevens Favorite that has mainspring with hole. This part was used in the late 1894 Stevens Favorite rifles... |
$5.95 CLICK HERE for More Info or to Order |
1 |
wp47 |
|
|
This screw holds the main spring (hammer spring (mainspring)) in place. The screw goes through the lower tang and is attached to the anterior portion... |
$3.65 CLICK HERE for More Info or to Order |
70 |
wp58 |
|
|
This screw provides tension to the main spring (hammer spring (mainspring)) resulting in more pressure when the hammer strikes the firing pin when... |
$3.85 CLICK HERE for More Info or to Order |
329 |
T722-a |
|
|
A MUST for anyone removing pins from guns - a Grace 4 piece BRASS starter Pin Punch Set that starts the pins for removal from their holes. ... |
$25.00 CLICK HERE for More Info or to Order
|
0 |
p126 |
|
|
This is the safety catch pin Winchester 1873, 1894 and 1876 lever action rifle. This pin holds the safety bar in the lower tang (also called trigger... |
$3.25 CLICK HERE for More Info or to Order |
30 |
p133 |
|
|
The sear pin will fit both type 1 and Type 2 recievers on the Winchester model 1895 |
$4.50 CLICK HERE for More Info or to Order |
6 |
wp605-b |
|
|
This is the screw that holds on the side plate on the FIRST and second model Winchester 1873. This only fits rifles that have a serial number below... |
$9.45 CLICK HERE for More Info or to Order |
22 |
wp613 |
|
|
This screw attaches the lower tang to the main receiver on the rifle. There is one screw on each side. On the 2nd model lower tang the... |
$3.25 CLICK HERE for More Info or to Order |
18 |
wp601-b |
|
|
This is the receiver side tang screw FIRST model 1873. This screw attatches the lower receiver tang to the main frame on the rifle. The length is... |
$6.00 CLICK HERE for More Info or to Order |
13 |
p160 |
|
|
This is the pin that holds the assembly screw lock in place on the model 1903 and very early 63 Winchester |
$2.50 CLICK HERE for More Info or to Order |
25 |
wp40 |
|
|
This is the tang screw (also called the stock screw) Winchester 1890 and 1906 and model 62, 62A. This screw holds the stock to the receiver. |
$5.75 CLICK HERE for More Info or to Order |
249 |
wp622-b |
|
|
This is the tang screw also called stock screw Winchester model 64 rifle and 1887 lever action shotgun. This screw holds the stock onto the receiver. |
$9.95 CLICK HERE for More Info or to Order |
8 |
wp520 |
|
|
Tang Screw custom made extra LONG so it can be fit to any number of Winchester Lever Action rifles. It retains all... |
$8.25 CLICK HERE for More Info or to Order |
344 |
wp23-b |
|
|
This is the tang screw (stock screw) Winchester 1906 EXPERT and the very rare 1890 pistol grip pump THAT IS USED TO ATTACH A TANG SIGHT. The screw... |
$8.25 CLICK HERE for More Info or to Order |
18 |
wp66-b |
|
|
This is the tang screw (stock screw) Winchester 1890 Special or the 1906 EXPERT pump .22. It is longer than a standard tang screw, and attaches the... |
$6.50 CLICK HERE for More Info or to Order |
40 |
s118-b |
|
|
Lower Tang WOOD Screw on a Stevens model 70 , Favorite and other models that have wood screws for tang attachment |
$4.95 CLICK HERE for More Info or to Order |
14 |
p123 |
|
|
Both the front and rear toggle link pins were the same dimention Winchester 1873. This pin will fit the front or the rear of the toggle links |
$4.25 CLICK HERE for More Info or to Order |
461 |
p129 |
|
|
This is the toggle Link pin Winchester 1876. This pin slides along the grooves cut out on the sides of the toggle links. Front and rear pins are the... |
$5.25 CLICK HERE for More Info or to Order
|
0 |
p122 |
|
|
This is the pin that holds the trigger and sear in place on the Winchester model 1873 lower tang. Up to serial number 28,000 this pin was inside of... |
$3.25 CLICK HERE for More Info or to Order |
37 |
p122-x |
|
|
This is the pin Winchester 1892 and 1894 that holds in the trigger and sear in the lower tang. The Winchester 1892 uses a 1 piece trigger and sear so... |
$3.45 CLICK HERE for More Info or to Order |
1 |
p172 |
|
|
This is the PIN for the trigger on a Winchester 1886 lever action rifle. The pin holds the trigger into the tang on the 1886 rifle and carbine. |
$6.50 CLICK HERE for More Info or to Order |
10 |
p112 |
|
|
This is the pin that holds the trigger in place on the Winchester 1890, 1906 , 62, 62A |
$4.50 CLICK HERE for More Info or to Order
|
0 |
s14-b |
|
|
Screw that holds the trigger spring in place on a Stevens Favorite. This is a QUALITY NEW part. Also fits the trigger spring on the... |
$4.50 CLICK HERE for More Info or to Order |
10 |
rp168-b thick neck |
Remington Original Part |
|
This is the ORIGINAL Buttplate Screw from Remiongton 22 bolt action rifles. This screw was used on models like the 33, 32, 31 and 12B and... |
$9.25 CLICK HERE for More Info or to Order |
1 |
sav13-SCREW for Buttplate savop |
Savage Original Part |
|
This is an ORIGINAL Savage Buttplate SCREW. This screw also fits into the end hole of the trigger guard and attaches to the stock wood. |
$12.25 CLICK HERE for More Info or to Order |
1 |
s146 sop |
Stevens Original Part |
|
An ORIGINAL Takedown (barrel) Screw for the Stevens Marksman 12 |
$36.00 CLICK HERE for More Info or to Order |
9 |
s113-b2 sop |
Stevens Original Part |
|
Screw (Dummy) for the Barrel PIN on the Stevens model 70 Visible Loader. This pin screws into the barrel pin, on the right side of the... |
$5.95 CLICK HERE for More Info or to Order
|
0 |
s101-b sop |
Stevens Original Part |
|
Breech block PIN model 44 Stevens. This is an ORIGINAL Stevens part. |
$5.15 CLICK HERE for More Info or to Order |
1 |
s3-b sop |
Stevens Original Part |
|
SCREW for a Metal Butt plate ORIGINAL for Stevens Favorite .22 (will also fit Crackshot, Junior 14 and 141/2, and Savage Model 12 stocks)... |
$6.50 CLICK HERE for More Info or to Order |
7 |
s1-a sop |
Stevens Original Part |
|
Screws ORIGINAL for Stevens Crackshot,Favorite, Ideal, Marksman, and other SMALL Stevens 22 rifles.buttplate. These screws are placed from top... |
$7.95 CLICK HERE for More Info or to Order |
8 |
s99-b sop |
Stevens Original Part |
|
Firing Pin Retainer Screw model 44 Stevens |
$4.75 CLICK HERE for More Info or to Order
|
0 |
s129-b sop |
Stevens Original Part |
|
Screw ORIGINAL for the Hammer on a Stevens Marksman 12 and the Model 101. |
$5.25 CLICK HERE for More Info or to Order |
4 |
s93-b sop |
Stevens Original Part |
|
Hammer Screw Stevens model 44 rolling block rifle. |
$5.50 CLICK HERE for More Info or to Order |
1 |
s127-b sop |
Stevens Original Part |
|
Screw ORIGINAL for the Joint between the frame and the barrel sleeve on a Stevens Marksman 12 AND mODEL 101. |
$16.25 CLICK HERE for More Info or to Order |
1 |
s10-a1 sop |
Stevens Original Part |
|
Link PIN for the Stevens Favorite - and ORIGINAL Stevens part for the mid- and later-production Favorites. This pin holds the link in the... |
$4.50 CLICK HERE for More Info or to Order |
3 |
s128-c sop |
Stevens Original Part |
|
PIN for the Link on a Stevens Marksman 12 and 101 rifle ORIGINAL part |
$9.50 CLICK HERE for More Info or to Order |
3 |
s128-b sop |
Stevens Original Part |
|
Screw for the Link on a Stevens Marksman 12 and 101 rifle ORIGINAL part. This screw holds the link attached to the fingert lever. |
$12.50 CLICK HERE for More Info or to Order |
2 |
s132-c sop |
Stevens Original Part |
|
Mainspring Plunger SCREW for Stevens Marksman 12 and 101 rifle ORIGINAL |
$9.00 CLICK HERE for More Info or to Order
|
0 |
s11-b sop |
Stevens Original Part |
|
Screw for securing the Mainspring of a Stevens Favorite ORIGINAL |
$5.95 CLICK HERE for More Info or to Order |
1 |
s39-b sop |
Stevens Original Part |
|
Screw for securing the Mainspring of a Stevens 16 Crackshot ORIGINAL |
$4.95 CLICK HERE for More Info or to Order |
2 |
s88 sop |
Stevens Original Part |
|
Stock ORIGINALTang Screw -- for the Upper and Lower tang on a Stevens model 70 and late Favorite rifles. This is a wood screw that goes through... |
$12.95 CLICK HERE for More Info or to Order |
4 |
s112-a sop |
Stevens Original Part |
|
ORIGINAL Tang PLUG Screw on a Stevens model 70 , Favorite, Ideal, Marksman and other models that can have tang sights |
$6.95 CLICK HERE for More Info or to Order |
5 |
s71-b sop |
Stevens Original Part |
|
Stock screw for Stevens Crackshot. The upper tang and lower tang screw are the same size so two are needed to attach the receiver to the stock for... |
$9.00 CLICK HERE for More Info or to Order
|
0 |
s111-c sop |
Stevens Original Part |
|
Trigger SCREW for a Stevens Marksman 12 and 101. Also fits little scout and late Stevens Favorite triggers ORIGINAL |
$5.25 CLICK HERE for More Info or to Order |
3 |
s95-b sop |
Stevens Original Part |
|
TRIGGER SCREW model 44 Stevens. This is an ORIGINAL Stevens part. |
$4.95 CLICK HERE for More Info or to Order
|
0 |