This is an original Finger lever Winchester 1892 LARGE cal only. It is complete with Friction stud and spring. Finnish on the metal varies due to original part. NOTE: When Winchester started making the 92 it was in 44/38WCF primarily, then they redesigned 32 WCF and the 25-20 later. The 44 and 38 were larger cartridges so when they modelified the receiver smaller 32 and 25 cartridges that had to design and make thicker cartridge guides m to feed right. This necessitated modelifications to the lever so it would clear the thicker guides. There is a milled port just below where the lever fits into the bolt on the small cal finger levers. It will be on both sides of the lever. This milled area is to accommodelate the guides 32 and 25. Now this lever will work in all 92?s but was designed 32 and 25. The original lever 44 and 38 was flat sided without this milled groove (This part) These will not work in a 32 or 25. (Thank you Johnny C. for info!)
