| Item Id |
Origin |
Product Image |
Item Name+ |
Price |
Quantity |
set62 |
|
|
This set consists of all of the external screws on the Winchester model 62 .22 cal rifle. Quite often, non-hollow ground screwdrivers are... |
$22.00
CLICK HERE
for More Info
or to Order |
63 |
set62A |
|
|
This set consists of all of the external screws on the Winchester model 62A .22 cal rifle. Quite often, non-hollow ground screwdrivers are... |
$13.25
CLICK HERE
for More Info
or to Order |
4 |
manuals-62 62A |
|
|
This book is illustrated with many photos and very detailed directions about how to takedown your Winchester 62 or 62A firearm. It will first outline... |
CLICK HERE
for More Info
or to Order |
107 |
wp13b |
Winchester Original Part |
|
Abutment for 62A hammer spring |
$9.25
CLICK HERE
for More Info
or to Order |
8 |
wp42 |
|
|
This is the forearm screw also called the action slide handle screw. This screw that fits the model 62 and 62A and Model 1897 shotgun action slide... |
$3.45
CLICK HERE
for More Info
or to Order |
10 |
wp1 wop |
Winchester Original Part |
|
Action Slide ORIGINAL for 1890 and 1906 model 62-62A Winchester pump .22 rifles. Your wood forearm is attached to the front round part of this... |
$62.00
CLICK HERE
for More Info
or to Order |
4 |
p110 |
|
|
This is the tiny little pin that goes into the end of the assembly screw (take down screw) on the Winchester 1890 - 1906, mod 62 and also fits... |
$2.55
CLICK HERE
for More Info
or to Order |
48 |
wp48-b wop |
Winchester Original Part |
|
An ORIGINAL Takedown (Assembly)screw for either a Winchester 1890 / 1906 / 62 / 62A pump 22 rifle. This is an ORIGINAL part that secures receiver to... |
$34.00
CLICK HERE
for More Info
or to Order |
2 |
wp48-a |
|
|
Takedown (Assembly)replacement (NEW) screw for either a Winchester 1890 - 1906 - 62 - 62A pump 22 rifle. This secures receiver to the trigger... |
$22.45
CLICK HERE
for More Info
or to Order |
18 |
wp190 wop |
Winchester Original Part |
|
ORIGINAL Bushing that goes through the carrier and holds hammer and take-down screw in place on Winchester pump 22 rifles. This part fits model 90 or... |
$7.75
CLICK HERE
for More Info
or to Order |
1 |
wp54-a |
|
|
Bushing that goes throught the carrier and holds hammer and take-down screw in place. This part fits model 90 or 06, 62 or 62A. If your carrier... |
$6.00
CLICK HERE
for More Info
or to Order |
2 |
brl62-22 N 2862 |
|
|
Winchester model 62A NEW Barrel in NEW and Excellent condition. This is a NEW 23 inch round barrel Winchester 62A pump 22 rifle, with all of the... |
$295.00
CLICK HERE
for More Info
or to Order
|
0 |
wp83-b wop |
Winchester Original Part |
|
THAT ARE ORIGINAL Bolts that are made specifically Winchester model 62A pump 22 rifle hat uses the pins that hold the firing pin stop in place... |
$59.00
CLICK HERE
for More Info
or to Order |
1 |
wp81-b wop |
Winchester Original Part |
|
This is an ORIGINAL (COMPLETE) breech bolt 1890, 1906 and model 62 Winchester pump .22 rifles. This is a bolt 3rd model. See the picture below that... |
$156.00
CLICK HERE
for More Info
or to Order |
1 |
wp81-a wop |
Winchester Original Part |
|
This is the breech bolt 1890, 1906. It will also fit the model 62 Winchester pump .22 rifle. This is a bolt 3rd model 1890. See the picture below... |
$96.00
CLICK HERE
for More Info
or to Order |
1 |
wp83-a wop |
Winchester Original Part |
|
These are ORIGINAL bolts COMPLETE - made specifically Winchester model 62A pump 22 rifle with pins that hold the firing pin stop in place... |
$165.00
CLICK HERE
for More Info
or to Order |
3 |
wp11-b |
|
|
This is the breech block lock (aka locking plate) Winchester model 62 that utilizes the one pin bolt (meaning that if you look down on the top of... |
$34.25
CLICK HERE
for More Info
or to Order |
240 |
wp231 wop |
Winchester Original Part |
|
These are ORIGINAL large style slot head buttplate screws for regular black hardened plastic, crescent style and carbine style metal buttplates on... |
$8.25
CLICK HERE
for More Info
or to Order |
5 |
wp57 |
|
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.75
CLICK HERE
for More Info
or to Order |
86 |
bp802 |
|
|
This is a Winchester replacement buttplate model 62 - 62A. It is Black with the Winchester logo in the middle of the buttplate. It is a reproduction... |
$21.25
CLICK HERE
for More Info
or to Order |
3 |
bp802 wop |
|
|
This is a Winchester ORIGINAL buttplate from a Model 62 - 62A. It is hard Black plastic with the Winchester logo in the middle of the buttplate.... |
$32.00
CLICK HERE
for More Info
or to Order
|
0 |
p108 |
|
|
This is the pin that holds the carrier lever to the carrier on the Winchester 1890, 1906, 62 or 62A |
$4.25
CLICK HERE
for More Info
or to Order
|
0 |
wp61-a |
|
|
Screw that holds the carrier lever spring in place on the 1906 Winchester .22 rifle carrier. This fits models 90 or 06,62 and 62a. The spring (part... |
$4.25
CLICK HERE
for More Info
or to Order |
96 |
wp30-a |
|
|
This is the Carrier lever SPRING for Winchester models 1890, 1906, 62 and 62A Winchester (and Rossi) .22 pump rifle. This spring sits on top of the... |
$10.75
CLICK HERE
for More Info
or to Order |
75 |
wp19-a |
|
|
Carrier lever for all 1890, 1906, 62, 62A Winchester models. It attaches to the side of the carrier and the carrier lever spring puts tension on it... |
$12.50
CLICK HERE
for More Info
or to Order |
1 |
wp89-b wop |
Winchester Original Part |
|
This is an ORIGINAL STRIPPED Winchester SHORT carrier that fits the Winchester 1890 (also THE EARLY 1906 and model 62 pump .22 rifles). It handles... |
$75.00
CLICK HERE
for More Info
or to Order
|
0 |
wp93-b wop |
Winchester Original Part |
|
This is an ORIGINAL Winchester 1906 COMPLETE carrier that fits the Winchester 1906 and model 62 pump .22 rifles. It handles S, L, AND LR bullets. The... |
$172.00
CLICK HERE
for More Info
or to Order |
2 |
wp89-a wop |
Winchester Original Part |
|
This is an ORIGINAL COMPLETE Winchester SHORT carrier that fits the Winchester 1890 (also the early 1906 and model 62 pump .22 rifles). It handles... |
$153.00
CLICK HERE
for More Info
or to Order |
3 |
p107 |
|
|
This is the pin that holds the cartridge stop (wp3A) in the carrier of the Winchester 1906 and 62 or 62A. If you have a carrier that only holds the... |
$3.75
CLICK HERE
for More Info
or to Order |
24 |
wp22-b |
|
|
Euscutcheon for model 62A Winchester pump handles. These go into the pump handle, they protect the wood from the screws that hold the handle to the... |
$4.50
CLICK HERE
for More Info
or to Order
|
0 |
wp26-a |
|
|
This is an Extractor for 1890 and 1906, 6 or 62A Winchester pump 22 rifles (also fits Rossi model 62 rifles). This part sits on the right side of the... |
$28.25
CLICK HERE
for More Info
or to Order
|
0 |
p111 |
|
|
This extractor pin is used on the Winchester models 1890, 1906, 62 and 62A. It goes in to0 the top of the bolt on the right side and down... |
$2.50
CLICK HERE
for More Info
or to Order |
57 |
wp244-aa wop |
Winchester Original Part |
|
This is an ORIGINAL pin that fits into the bolt holding the extractor in on the 1890, 1906 62 62A Winchester pump .22 |
$3.25
CLICK HERE
for More Info
or to Order |
67 |
wp244-a wop |
Winchester Original Part |
|
An ORIGINAL Extractor for 1890 and 1906, 6 or 62A Winchester pump 22 rifles (also fits Rossi model 62 rifles). This part sits on the right side of... |
$32.00
CLICK HERE
for More Info
or to Order
|
0 |
wp741spring |
|
|
Spring that fits around the firing pin Winchester 1890, 1906, 62, 62A and 1902 rifles. |
$4.75
CLICK HERE
for More Info
or to Order |
71 |
wp213-a wop |
Winchester Original Part |
|
An ORIGINAL Firing pin stop for 1890 and 1906 and the early model 62 Winchester pump .22 rifles. This goes on the left side of the bolt and keeps the... |
$22.25
CLICK HERE
for More Info
or to Order
|
0 |
p101 |
|
|
This pin fits the Winchester model 62 or 62A. It goes into the top of the bolt and holds the firing pin stop in place. |
$4.75
CLICK HERE
for More Info
or to Order
|
0 |
wp2-c |
|
|
This is the firing pin stop Winchester 62A. It takes the firing pin stop pins and the holes are located in a slightly different place unlike the 90 -... |
$13.75
CLICK HERE
for More Info
or to Order |
25 |
wp60 |
|
|
Firing pin stop-screw for 1890 and 1906 pump .22 Winchester rifles. The 1890 and 1906 62 and some of the 62A uses two of these screws to hold the... |
$3.55
CLICK HERE
for More Info
or to Order |
151 |
wp705 |
|
|
This is the firing pin Winchester model 62 that utilizes a the different style locking system in the bolt. If your serial number is stamped with an... |
$38.50
CLICK HERE
for More Info
or to Order |
22 |
wp742 |
|
|
This is a new firing pin Winchester 62 62A. It is the one that has a chisel tip .070 inches. The spring is sold separately part number (741spring)... |
$34.50
CLICK HERE
for More Info
or to Order
|
0 |
frm62f |
|
|
This is the forearm Winchester model 62-62A post war. On Dec 1st 1948 (around serial number 225,000) Winchester changed the forearm from the 17... |
$77.50
CLICK HERE
for More Info
or to Order |
4 |
frm62A-pstflatbottom wop |
Winchester Original Part |
|
This is an ORIGINAL forearm for the Winchester model 62A post war. After the 9140939 production Winchester changed the forearm from the completely... |
$98.50
CLICK HERE
for More Info
or to Order |
3 |
frm62-pst |
|
|
This is the forearm Winchester model 62-62A post war. After 1939 production Winchester changed the forearm from the smaller pre war style to this... |
$78.50
CLICK HERE
for More Info
or to Order
|
0 |
frm62-pstround wop |
Winchester Original Part |
|
This is an ORIGINAL forearm for the Winchester model 62-62A post war. After 1939 production Winchester changed the forearm from the smaller pre... |
$98.50
CLICK HERE
for More Info
or to Order
|
0 |
wp20-a wop |
Winchester Original Part |
|
Hammer for 1890 and 1906 and 62 Winchester, Pump 22 rifles. Original Winchester manufacture. It is complete with the pin and stirrup that the main... |
$37.00
CLICK HERE
for More Info
or to Order |
45 |
wp28-a wop |
Winchester Original Part |
|
These are FACTORY NEW and ORIGINAL hammers model 62A Winchester. Originally produced by the Winchester Factory, they were bought in bulk in the late... |
$50.00
CLICK HERE
for More Info
or to Order
|
0 |
wp13-a wop |
Winchester Original Part |
|
This is an ORIGINAL hammer spring (mainspring) abutment guide rod. the hammer spring (mainspring) (wp13s) goes around this bar and puts tension on... |
$19.50
CLICK HERE
for More Info
or to Order
|
0 |
wp13-p wop |
Winchester Original Part |
|
This is an ORIGINAL PIN that holds the hammer spring (mainspring) abutment tinto the lower receiver on the Model 62A Winchester .22 pump.The... |
$9.50
CLICK HERE
for More Info
or to Order
|
0 |
wp13-b wop |
Winchester Original Part |
|
This is an ORIGINAL hammer spring (mainspring) abutment that fits the Model 62A Winchester .22 pump.The abuttment is held in place with a pin... |
$11.50
CLICK HERE
for More Info
or to Order |
10 |
wp13-c wop |
Winchester Original Part |
|
This is an ORIGINAL hammer spring (mainspring) that fits over the abutment guide rod. the hammer spring (mainspring) puts tension on the hammer This... |
$9.50
CLICK HERE
for More Info
or to Order |
2 |
wp731 |
|
|
hammer spring (mainspring) (also called the mainspring) that mounts on the lower tang and hammer stirrup. This spring provides the energy hammer to... |
$34.50
CLICK HERE
for More Info
or to Order |
14 |
wp206-a wop |
Winchester Original Part |
|
These are ORIGINAL hammer springs (mainspring --also called the mainspring) that mounts WITHIN the lower tang, attached by the mainspring screw... |
$49.50
CLICK HERE
for More Info
or to Order |
4 |
p104 |
|
|
This is the pin that holds the stirrup onto the hammer. The stirrup is what the mainspring (or hammer spring (mainspring)) attaches to putting... |
$3.25
CLICK HERE
for More Info
or to Order |
35 |
wp20-b wop |
Winchester Original Part |
|
This is an ORIGINAL hammer stirrup Winchester 1890, 1906 and model 62 hammer. It is held in place by a pin (p104) to the bottom of the hammer. It... |
$9.75
CLICK HERE
for More Info
or to Order |
8 |
wp202-a wop |
Winchester Original Part |
|
This is an ORIGINAL magazine follower Winchester for the 1890 WRF inner magazine tube. It will work for Winchester 1890 WRF outer tubes. |
$16.00
CLICK HERE
for More Info
or to Order |
2 |
wp586 wop |
Winchester Original Part |
|
This is an Original magazine follower Winchester 1890 1906 62 62A 61 inner magazine tube in Sort, Long and Long Rifle. |
$11.25
CLICK HERE
for More Info
or to Order
|
0 |
wp586-a wop |
Winchester Original Part |
|
This is an ORIGINAL magazine follower for the Winchester Model 1890, 1906, 61 62 62A that fits into the inner magazine tube. It will work for... |
$21.00
CLICK HERE
for More Info
or to Order
|
0 |
wp725-a |
|
|
This is the front hanger with a slightly larger base for worn dove tail slots on the barrel. What can happen is if you don't know that the... |
$32.75
CLICK HERE
for More Info
or to Order
|
0 |
wp200-b wop |
Winchester Original Part |
|
This is the hard to find ORIGINAL slotted front Magazine Hanger (magazine ring) for 1890 and 1906 and 62 Winchester pump .22 rifles. It has a groove... |
$52.75
CLICK HERE
for More Info
or to Order
|
0 |
wp724 |
|
|
Front Magazine Hanger (magazine ring) for 1890,1906, 62, 62A and model 61 Winchester pump .22 rifles. This hanger does not have a slot for... |
$26.50
CLICK HERE
for More Info
or to Order
|
0 |
wp200-a wop |
Winchester Original Part |
|
This is an ORIGINAL Front Magazine Hanger (magazine ring) for 1890 and 1906, 61 and 62 Winchester pump .22 rifles. It does NOT have a slot magazine... |
$34.75
CLICK HERE
for More Info
or to Order
|
-1 |
wp723 |
|
|
Rear Magazine Hanger (magazine ring) for 1890 and 1906 Winchester with hole for magazine securing pin. The pin (wp723pin) comes as an option and... |
$29.50
CLICK HERE
for More Info
or to Order
|
0 |
wp199-a wop |
Winchester Original Part |
|
Rear Magazine Hanger (magazine ring) ORIGINAL for 1890 and 1906 Winchester with hole for magazine securing pin. The Magazine Hanger (magazine ring)... |
$52.00
CLICK HERE
for More Info
or to Order |
1 |
wp3-b |
|
|
This magazine plug fits Winchester 1890 - 1906 and 62 - 62A, 61. This plug is blued and knurled but, there is no hole drilled plug pin. |
$8.25
CLICK HERE
for More Info
or to Order |
5 |
ms22 |
|
|
Spring that fits inside of the inner magazine tube on the Winchester 90 - 06 - 62 - 61 74. If you are able to get the magazine plug out by removing... |
$8.75
CLICK HERE
for More Info
or to Order |
81 |
mt1-brass |
|
|
Complete Inner Magazine tube with spring, plunger and Forearm plug for .22 S, L, and LR .22 rifles. This fits models 1890/1906, 62, 62A, 61. The tube... |
$28.45
CLICK HERE
for More Info
or to Order
|
0 |
mt1 wop |
Winchester Original Part |
|
Inner Magazine tube ORIGINAL, including follower spring and follower-plug-- tube is is 17 1/2 inches in length, standard on all Winchester 22... |
$96.00
CLICK HERE
for More Info
or to Order |
1 |
mt3 |
|
|
This is a NEW Outer magazine tube replacement for S., L., and LR Winchester pump 22 guns. This fits models 1890, 1906, 61,62 , 62A 61. (All... |
$28.50
CLICK HERE
for More Info
or to Order
|
0 |
mt2 |
|
|
Outer magazine tube replacement for S., L., and LR Winchester pump .22 models 1890, 1906, 62, 62A and 61 and 72. The slot is placed farther forward... |
$28.50
CLICK HERE
for More Info
or to Order
|
0 |
mt2 wop |
Winchester Original Part |
|
This is the Outer magazine tube S., L., and LR Winchester pump .22 models 62, 62A and 61 and 72. It will also fit model 1890 and... |
$47.00
CLICK HERE
for More Info
or to Order |
1 |
mt1 |
|
|
This is a NEW Complete Inner Magazine tube Winchester models 1890, 1906, 62, 62A and 61 which shoot the SHORT, LONG or LONG RIFLE. This inner mag... |
$32.45
CLICK HERE
for More Info
or to Order |
86 |
wp58 |
|
|
This screw provides tension to the main spring (hammer spring (mainspring)) resulting in more pressure when the hammer strikes the firing pin when... |
$3.20
CLICK HERE
for More Info
or to Order |
359 |
wp25-a |
|
|
This is a new Side plate also called Action Slide Cover for 1890 and 1906 62 or 62A Winchester pump 22 rifles. This plate slides from front to back... |
$23.50
CLICK HERE
for More Info
or to Order |
12 |
wp49 |
|
|
Screw that holds side plate in place on 1890 and 1906 Winchester pump .22 rifles. This part fits model 90 or model 06 or 62A |
$3.20
CLICK HERE
for More Info
or to Order |
232 |
wp25-b wop |
Winchester Original Part |
|
This is a ORIGINAL Side plate for 1890 and 1906 62 or 62A Winchester pump 22 rifles. This plate slides from front to back into the groove on the left... |
$36.00
CLICK HERE
for More Info
or to Order |
2 |
st130-a1 mbos |
|
|
Marble ORIGINAL No 6 front sight was used on LARGE CALIBER 1895 Winchester lever action rifles. Also sued on Model 56, 59,60,... |
$36.00
CLICK HERE
for More Info
or to Order |
1 |
st42 |
|
|
This is a beautifully hand crafted front globe combination sight for your Winchester and Remington rifles. They were a special order option on the... |
$126.75
CLICK HERE
for More Info
or to Order |
7 |
st124 wop |
Winchester Original Part |
|
This was the Winchester factory issued ORIGINAL 75A front sight for Winchester 1890 pump 22 rifles. Sight in good condition, taken from a Winchester... |
$62.00
CLICK HERE
for More Info
or to Order |
1 |
st202-a wop |
Winchester Original Part |
|
Sight, Front ORIGINAL Winchester 75B - This sight fits into the standard Winchester 0.375 (3/8 inch) female dovetail and has a post that is... |
$45.50
CLICK HERE
for More Info
or to Order
|
0 |
st115 |
|
|
These are type 1 sight steps that fit all models of .22 rifles. There are three different thicknesses. .050, .060, and .085-.10. When ordering... |
$17.00
CLICK HERE
for More Info
or to Order |
8 |
st211-b wop |
Winchester Original Part |
|
This is an ORIGINAL Winchester 2C elevator used principally on model 67 69 72 and model 74 model 32B rear sights. Also used for elevation on... |
$46.00
CLICK HERE
for More Info
or to Order |
1 |
st9803 |
|
|
This is a marbles arms tang sight (aka Peep Sight) Winchester 1890 1906 62 and 62A. It comes with 3 different sight apertures (1/2 inch diameter with... |
$108.75
CLICK HERE
for More Info
or to Order
|
0 |
st11 |
|
|
This is a model 32-B rear replacement site with N0. 2B elevator for Remington model 12 and model 1890 - 1906, 62A, 63, 69, 61 63 and 1903 Winchester... |
$21.75
CLICK HERE
for More Info
or to Order |
14 |
st200 wop |
Winchester Original Part |
|
Rear Sight Winchester model 32-B used on 1890 1906 59, 60, 61 62 62A 63 69 72 74 75 Winchester rifles and other 22 rifles. These are ORIGINAL... |
$76.00
CLICK HERE
for More Info
or to Order |
3 |
st201-a wop |
Winchester Original Part |
|
This is the less-common ORIGINAL Winchester No. 32C Rear Sight. This sight was put on model 69 and 69A Winchester bolt action rifles. The blade is... |
$43.00
CLICK HERE
for More Info
or to Order |
4 |
st211-a wop |
Winchester Original Part |
|
A VERY RARE special order Rear Sight, the Winchester ORIGINAL No. 32D for Winchester 1906 and 75 Sporter, and also used on 56, 57, 58, 59,60,... |
$42.00
CLICK HERE
for More Info
or to Order |
7 |
stk62 |
|
|
This quality NEW black walnut stock that fits Winchester model 62 or 62A pump .22 rifles. The stock is slightly over sized to allow for fitting... |
$101.50
CLICK HERE
for More Info
or to Order |
6 |
stk62 E wop |
Winchester Original Part |
|
This is an original 62 or 62a stock in EXCELLENT condition. It it does not have the buttplate or screws. This is an ORIGINAL so color and finish... |
$128.00
CLICK HERE
for More Info
or to Order
|
0 |
stk62 G wop |
Winchester Original Part |
|
This is an original 62 62a stock in GOOD condition. It it does not have the buttplate or screws. This is an ORIGINAL so color and finish varies.... |
$105.00
CLICK HERE
for More Info
or to Order
|
0 |
stk62 M wop |
Winchester Original Part |
|
This is an original 62 62a stock in MODERATE condition. It it does not have the buttplate or screws. This is an ORIGINAL so color and finish varies.... |
$58.00
CLICK HERE
for More Info
or to Order
|
0 |
wp40 |
|
|
This is the tang screw (also called the stock screw) Winchester 1890 and 1906 and model 62, 62A. This screw holds the stock to the receiver. |
$4.00
CLICK HERE
for More Info
or to Order |
217 |
wp66-a |
|
|
This is the long tang screw (stock bolt) that fits on the Winchester 1890, 1906, 62, 62A pump .22 rifle. This screw is a tad bit longer than the... |
$7.95
CLICK HERE
for More Info
or to Order |
5 |
wp271 wop |
Winchester Original Part |
|
Here are some Winchester factory ORIGINAL triggers for Winchester model 62A. These came FROM THE Winchester FACTORY to a gunsmith who specialized in... |
$48.00
CLICK HERE
for More Info
or to Order |
30 |
wp27-a wop |
Winchester Original Part |
|
This is an ORIGINAL Trigger for 1890 and 1906 Winchester. This part fits model 1890 or 1906 or 62. It is held in place by pin p112. (This trigger is... |
$24.00
CLICK HERE
for More Info
or to Order |
18 |
p112 |
|
|
This is the pin that holds the trigger in place on the Winchester 1890, 1906 , 62, 62A |
$4.50
CLICK HERE
for More Info
or to Order |
4 |
wp50 |
|
|
This is the trigger spring screw (Sear spring) - that fits the Winchester 1866, 1873, 1886, 1894, 1892, models 53, and 65. Also the 1890 1906 62 and... |
$3.50
CLICK HERE
for More Info
or to Order |
394 |
wp24-a |
|
|
Trigger spring for an 1890 - 1906 and model 62 pump 22 rifle. This spring sits in the lower tang and rest on the trigger. It is held in place by... |
$13.50
CLICK HERE
for More Info
or to Order |
4 |
wp30-b |
|
|
This is the coil style trigger spring LATE PRODUCTION Winchester 62A. This spring fits into the hole on the back of the trigger part number wp28B.... |
$4.50
CLICK HERE
for More Info
or to Order
|
0 |
wp185-b wop |
Winchester Original Part |
|
Trigger spring 0RIGINAL for an 1890 - 1906 and model 62 pump 22 rifle. This spring sits in the lower tang and rests on the trigger. It is held in... |
$14.00
CLICK HERE
for More Info
or to Order
|
0 |
wp185-a wop |
Winchester Original Part |
|
This is an ORIGINAL trigger spring screw (Sear spring) - that fits the Winchester 1866, 1873, 1886, 1894, 1892, models 53, and 65. Also the 1890 1906... |
$3.75
CLICK HERE
for More Info
or to Order |
32 |
wp28-b wop |
Winchester Original Part |
|
This is AN ORIGINAL trigger Winchester model 62/62A. This trigger has SERRATIONS on the trigger-pulling area and a hole in the back to accommodelate... |
$19.50
CLICK HERE
for More Info
or to Order |
6 |
wp53 |
|
|
Plug screw that fits into the upper tang on the 1890 or 1906, 1903, 62, 62A, 63 1866 1873 1876 1892 1894 1886 model 53 and 65 Winchester... |
$3.65
CLICK HERE
for More Info
or to Order |
23 |
