Item Id |
Product Image |
Item Name |
Price |
Quantity |
set62 |
|
This set consists of all of the external screws on the Winchester model 62 .22 cal rifle. Quite often, non-hollow ground screwdrivers are... |
$22.00 CLICK HERE for More Info or to Order |
28 |
set62 wop |
|
This ORIGINAL screw set consists of all of the external screws on the Winchester model 62A pump .22 cal rifle. When restoring a gun, this set will... |
$36.00 CLICK HERE for More Info or to Order |
1 |
wp42 |
|
This is the forearm screw also called the action slide handle screw. This screw that fits the model 62 and 62A action slide handle (wooden pump... |
$3.85 CLICK HERE for More Info or to Order |
2 |
wp646 wop |
|
Action Slide ORIGINAL for ONLY the 1 pin 62 Winchester pump .22 rifles BOLT . If you need the Breech bolt lock please see wp11-b , pin is... |
$108.00 CLICK HERE for More Info or to Order |
3 |
wp1 |
|
Action Slide ORIGINAL for 1890 and 1906 model 62-62A Winchester pump .22 rifles. Your wood forearm is attached to the front round part of this... |
$61.00 CLICK HERE for More Info or to Order |
59 |
p110 |
|
This is the tiny little pin that goes into the end of the assembly screw (take down screw) on the Winchester 1890 - 1906, mod 62 and also fits... |
$2.55 CLICK HERE for More Info or to Order |
71 |
wp48-b wop |
|
An ORIGINAL Takedown (Assembly)screw for either a Winchester 1890 / 1906 / 62 / 62A pump 22 rifle. This is an ORIGINAL part that secures receiver to... |
$33.00 CLICK HERE for More Info or to Order |
36 |
wp48-a |
|
Takedown (Assembly)replacement (NEW) screw for either a Winchester 1890 - 1906 - 62 - 62A pump 22 rifle. This secures receiver to the trigger... |
$25.45 CLICK HERE for More Info or to Order |
2 |
wp190 wop |
|
ORIGINAL Bushing that goes through the carrier and holds hammer and take-down screw in place on Winchester pump 22 rifles. This part fits model 90 or... |
$11.50 CLICK HERE for More Info or to Order |
51 |
wp54-a |
|
Bushing that goes throught the carrier and holds hammer and take-down screw in place. This part fits model 90 or 06, 62 or 62A. If your carrier... |
$7.80 CLICK HERE for More Info or to Order |
31 |
brl62-E wop |
|
Winchester model 62 ORIGINAL Barrel in EXCELLENT condition. We have several used original 62 barrels, each with strong rifling and minimal markings... |
$276.00 CLICK HERE for More Info or to Order |
2 |
brl62-22 G 3868 |
|
Winchester model 62 ORIGINAL Barrel in GOOD condition. These ORIGINAL model 62 barrels each with strong rifling and minimal markings in the lands --... |
$226.00 CLICK HERE for More Info or to Order |
1 |
brl62-22 M 2387 |
|
An original 62 Winchester barrel in MODERATE condition. Bore has rifling, but with markings in the lands, and sometime rings, but will shoot well.... |
$79.00 CLICK HERE for More Info or to Order
|
0 |
brl62-E SHORT wop |
|
Winchester Model 62 SHORT Barrel in EXCELLENT condition. - all ready model 62A Gallery restoration. Metal has EXCELLENT bluing with some color turned... |
$296.00 CLICK HERE for More Info or to Order
|
0 |
wp83-b wop |
|
THAT ARE ORIGINAL Bolts that are made specifically Winchester model 62A pump 22 rifle hat uses the pins that hold the firing pin stop in place... |
$79.00 CLICK HERE for More Info or to Order |
5 |
wp81-b wop |
|
This is an ORIGINAL (COMPLETE) breech bolt 1890, 1906 and model 62 Winchester pump .22 rifles. This is a bolt 3rd model. See the picture below that... |
$136.00 CLICK HERE for More Info or to Order |
7 |
wp81-a wop |
|
This is the breech bolt 1890, 1906. It will also fit the model 62 Winchester pump .22 rifle. This is a bolt 3rd model 1890. See the picture below... |
$76.00 CLICK HERE for More Info or to Order |
2 |
wp198 wop |
|
These are ORIGINAL bolts COMPLETE - made specifically Winchester model 62 pump 22 rifle with 1 PIN style BOLT. This style... |
$215.00 CLICK HERE for More Info or to Order
|
0 |
wp83-a wop |
|
These are ORIGINAL bolts COMPLETE - made specifically Winchester model 62A pump 22 rifle with pins that hold the firing pin stop in place... |
$165.00 CLICK HERE for More Info or to Order |
2 |
wp11-b |
|
This is the breech block lock (aka locking plate) Winchester model 62 that utilizes the one pin bolt (meaning that if you look down on the top of... |
$34.25 CLICK HERE for More Info or to Order |
224 |
p170 |
|
In 1935 Winchester changed its locking system from using the protrusion on the firing pin as the breech bolt lock to this new system. If you... |
$11.50 CLICK HERE for More Info or to Order |
2 |
wp231 wop |
|
These are ORIGINAL large style slot head buttplate screws for regular black hardened plastic, crescent style and carbine style metal buttplates on... |
$8.25 CLICK HERE for More Info or to Order |
17 |
wp57 |
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.95 CLICK HERE for More Info or to Order |
567 |
bp802 |
|
This is a Winchester replacement buttplate model 62 - 62A. It is Black with the Winchester logo in the middle of the buttplate. It is a reproduction... |
$24.25 CLICK HERE for More Info or to Order |
6 |
bp802 wop |
|
This is a Winchester ORIGINAL buttplate model 62 - 62A. It is Black with the Winchester logo in the middle of the buttplate. It is a reproduction of... |
$28.00 CLICK HERE for More Info or to Order |
2 |
bp803 |
|
This NEW buttplate fits Winchester models 60, 61, 1910, 67, 67A, 69, 72, 77 and 1904. It is a reproduction of an original buttplate made from... |
$24.25 CLICK HERE for More Info or to Order
|
0 |
p108 |
|
This is the pin that holds the carrier lever to the carrier on the Winchester 1890, 1906, 62 or 62A |
$4.25 CLICK HERE for More Info or to Order |
6 |
wp61-a |
|
Screw that holds the carrier lever spring in place on the 1906 Winchester .22 rifle carrier. This fits models 90 or 06,62 and 62a. The spring (part... |
$4.25 CLICK HERE for More Info or to Order |
25 |
wp30-a |
|
This is the Carrier lever SPRING for Winchester models 1890, 1906, 62 and 62A Winchester (and Rossi) .22 pump rifle. This spring sits on top of the... |
$12.75 CLICK HERE for More Info or to Order |
4 |
wp19-a |
|
Carrier lever for all 1890, 1906, 62, 62A Winchester models. It attaches to the side of the carrier and the carrier lever spring puts tension on it... |
$13.95 CLICK HERE for More Info or to Order |
245 |
wp19- b wop |
|
An ORIGINAL Carrier lever for all 1890, 1906, 62, 62A Winchester models. These were removed from Winchester 22 rifles and attaches to the side... |
$15.95 CLICK HERE for More Info or to Order |
19 |
wp89-a wop |
|
This is an ORIGINAL COMPLETE Winchester SHORT carrier that fits the Winchester 1890 (also the early 1906 and model 62 pump .22 rifles). It handles... |
$163.00 CLICK HERE for More Info or to Order |
12 |
wp89-b wop |
|
This is an ORIGINAL STRIPPED Winchester SHORT carrier that fits the Winchester 1890 (also THE EARLY 1906 and model 62 pump .22 rifles). It handles... |
$75.00 CLICK HERE for More Info or to Order |
2 |
wp93-a wop |
|
This is an ORIGINAL Winchester 1906 STRIPPED carrier that fits the Winchester 1906 and model 62 pump .22 rifles. It handles S L LR bullets. The... |
$112.00 CLICK HERE for More Info or to Order |
1 |
p107 |
|
This is the pin that holds the cartridge stop (wp3A) in the carrier of the Winchester 1906 and 62 or 62A. If you have a carrier that only holds the... |
$3.75 CLICK HERE for More Info or to Order |
13 |
wp22-b |
|
Euscutcheon for model 62A Winchester pump handles. These go into the pump handle, they protect the wood from the screws that hold the handle to the... |
$4.50 CLICK HERE for More Info or to Order
|
0 |
p111 |
|
This extractor pin is used on the Winchester models 1890, 1906, 62 and 62A. It goes in to0 the top of the bolt on the right side and down... |
$3.50 CLICK HERE for More Info or to Order |
32 |
wp244-aa wop |
|
This is an ORIGINAL pin that fits into the bolt holding the extractor in on the 1890, 1906 62 62A Winchester pump .22 |
$3.25 CLICK HERE for More Info or to Order |
44 |
wp26-a |
|
This is a NEW reproduction Extractor for 1890 and 1906, or 62A Winchester pump 22 rifle (also fits Rossi model 62 rifles). This part sits... |
$58.25 CLICK HERE for More Info or to Order
|
0 |
wp244-a wop |
|
An ORIGINAL Extractor for 1890 and 1906, 6 or 62A Winchester pump 22 rifles (also fits Rossi model 62 rifles). This part sits on the right side of... |
$78.00 CLICK HERE for More Info or to Order |
6 |
wp741spring |
|
Spring that fits around the firing pin Winchester 1890, 1906, 62, 62A and 1902 rifles. |
$5.25 CLICK HERE for More Info or to Order |
19 |
wp213-a wop |
|
An ORIGINAL Firing pin stop for 1890 and 1906 and the early model 62 Winchester pump .22 rifles. This goes on the left side of the bolt and keeps the... |
$48.25 CLICK HERE for More Info or to Order |
12 |
wp2-a |
|
Firing pin stop for 1890 and 1906 and early model 62 Winchester pump .22 rifles. This goes on the left side of the bolt and keeps the firing pin in... |
$29.25 CLICK HERE for More Info or to Order |
154 |
p101 |
|
This pin fits the Winchester model 62 or 62A. 2 pins located on the left side of bolt, go down through the firing pin stop to hold... |
$4.75 CLICK HERE for More Info or to Order
|
0 |
wp2-c |
|
This is the firing pin stop Winchester 62A. It takes the firing pin stop pins and the holes are located in a slightly different place unlike the 90 -... |
$13.75 CLICK HERE for More Info or to Order |
20 |
wp60 |
|
Firing pin stop-screw for 1890 and 1906 pump .22 Winchester rifles. The 1890 and 1906 62 and some of the 62A uses two of these screws to hold the... |
$3.85 CLICK HERE for More Info or to Order
|
0 |
wp705 |
|
This is the firing pin Winchester model 62 that utilizes a the different style locking system in the bolt. If your serial number is stamped with an... |
$38.50 CLICK HERE for More Info or to Order |
15 |
frm62-pre NEW |
|
This is the very hard to find NEW 10 groove forearm Winchester model 62. This fits model 62's that were in production from 1932 through 1939. It... |
$75.50 CLICK HERE for More Info or to Order |
7 |
frm62-early wop |
|
Forearm model 62 - ORIGINAL from a pre-war period gun. This is the torpedo-shaped forearm with 10 grooves. |
$89.00 CLICK HERE for More Info or to Order |
5 |
frm62f |
|
This is the forearm Winchester model 62-62A post war. On Dec 1st 1948 (around serial number 225,000) Winchester changed the forearm from the 17... |
$77.50 CLICK HERE for More Info or to Order
|
0 |
frm62f wop |
|
This is an ORIGINAL forearm for the Winchester model 62-62A post war. On Dec 1st 1948 (around serial number 225,000) Winchester changed the... |
$97.50 CLICK HERE for More Info or to Order |
4 |
frm62-pst |
|
This is a NEW forearm for the Winchester model 62-62A post war. After 1939 production Winchester changed the forearm from the smaller pre war... |
$78.50 CLICK HERE for More Info or to Order
|
0 |
frm62-pst ORIGINAL |
|
This is fa NEWan ORIGINAL Forearm for the Winchester model 62-62A post war. After 1939 production Winchester changed the forearm from the... |
$96.50 CLICK HERE for More Info or to Order |
4 |
wp20-a wop |
|
Hammer for 1890 and 1906 and 62 Winchester, Pump 22 rifles. Original Winchester manufacture. It is complete with the pin and stirrup that the main... |
$27.00 CLICK HERE for More Info or to Order |
36 |
wp28-a wop |
|
These are FACTORY NEW and ORIGINAL hammers model 62A Winchester.and Rossi model 62SA, 62SAC and model 59 Originally produced by the Winchester... |
$51.00 CLICK HERE for More Info or to Order |
5 |
wp13-a wop |
|
This is an ORIGINAL hammer spring (mainspring) abutment guide rod. the hammer spring (mainspring) (wp13s) goes around this bar and puts tension on... |
$19.50 CLICK HERE for More Info or to Order |
5 |
p113 |
|
This is the pin that holds the hammer spring (mainspring) abutment in place on the later production Winchester model 62A rifles. This pin goes right... |
$4.25 CLICK HERE for More Info or to Order |
30 |
wp13-a |
|
This is the hammer spring (mainspring) abutment late production Winchester 62A rifle. The hammer spring (mainspring) abutment guide rod (wp13g) sits... |
$9.35 CLICK HERE for More Info or to Order |
12 |
wp13-s |
|
This is the hammer spring (mainspring) that wraps around the hammer spring (mainspring) abutment guide rod (wp13g) late production Winchester model... |
$8.45 CLICK HERE for More Info or to Order
|
0 |
p104 |
|
This is the pin that holds the stirrup onto the hammer. The stirrup is what the mainspring (or hammer spring (mainspring)) attaches to putting... |
$3.25 CLICK HERE for More Info or to Order |
31 |
wp20-b wop |
|
This is an ORIGINAL hammer stirrup Winchester 1890, 1906 and model 62 hammer. It is held in place by a pin (p104) to the bottom of the hammer. It... |
$9.75 CLICK HERE for More Info or to Order |
6 |
wp28-a |
|
This is the hammer Winchester model 62/62A. This is the unique hammer that fits the models with the COIL style hammer spring (mainspring) also called... |
$31.25 CLICK HERE for More Info or to Order
|
0 |
wp202-a wop |
|
This is an ORIGINAL magazine follower Winchester for the 1890 WRF inner magazine tube. It will work for Winchester 1890 WRF outer tubes. |
$19.00 CLICK HERE for More Info or to Order |
5 |
wp586-a |
|
This is a magazine follower Winchester 1890 1906 62 62A 61 inner magazine tube in Sort, Long and Long Rifle. This parts is inside the inner magazine... |
$17.25 CLICK HERE for More Info or to Order |
6 |
wp586-b wop |
|
This is an ORIGINAL magazine follower for the Winchester Model 1890, 1906, 61 62 62A that fits into the inner magazine tube. It will work for... |
$21.00 CLICK HERE for More Info or to Order |
2 |
wp18-b |
|
New Magazine friction spring for 1890 and 1906 Winchester pump .22 rifles. This part fits model 90 - 06, 62A. If you have a new replacement outter... |
$28.25 CLICK HERE for More Info or to Order
|
0 |
wp18-a wop |
|
Magazine friction spring ORIGINAL for 1890 and 1906 Winchester pump .22 rifles. This part fits model 90 - 06, and some 61 and 62 rifles. If you have... |
$34.25 CLICK HERE for More Info or to Order |
23 |
wp725-a |
|
This is the front hanger with a slightly larger base for worn dove tail slots on the barrel. What can happen is if you don't know that the... |
$49.75 CLICK HERE for More Info or to Order |
30 |
wp200-b wop |
|
This is the hard to find ORIGINAL slotted front Magazine Hanger (magazine ring) for 1890 and 1906 and 62 Winchester pump .22 rifles. It has a groove... |
$58.75 CLICK HERE for More Info or to Order |
23 |
wp724 |
|
Front Magazine Hanger (magazine ring) for 1890,1906, 62, 62A and model 61 Winchester pump .22 rifles. This hanger does not have a slot for... |
$39.50 CLICK HERE for More Info or to Order |
7 |
wp200-a wop |
|
This is an ORIGINAL Front Magazine Hanger (magazine ring) for 1890 and 1906, 61 and 62 Winchester pump .22 rifles. It does NOT have a slot magazine... |
$55.75 CLICK HERE for More Info or to Order |
25 |
wp723 |
|
Rear Magazine Hanger (magazine ring) for 1890 and 1906 Winchester with hole for magazine securing pin. The pin (wp723pin) comes as an option and... |
$39.50 CLICK HERE for More Info or to Order |
35 |
wp199-a |
|
Rear Magazine Hanger (magazine ring) ORIGINAL for 1890 and 1906 Winchester with hole for magazine tube securing pin. The Magazine Hanger (magazine... |
$56.50 CLICK HERE for More Info or to Order |
36 |
wp3-b |
|
This magazine plug fits Winchester 1890 - 1906 and 62 - 62A, 61. 72 This plug is blued and knurled but, there is no hole drilled for the plug... |
$11.25 CLICK HERE for More Info or to Order |
7 |
wp585 wop |
|
This is an original Magazine plug for inner magazine tube. Fits models 90 - 06, 62A 61 and 72. This plug is blued and knurled but, and... |
$18.50 CLICK HERE for More Info or to Order |
14 |
ms22 |
|
Spring that fits inside of the inner magazine tube on the Winchester 90 - 06 - 62 - 61 74. If you are able to get the magazine plug out by removing... |
$9.75 CLICK HERE for More Info or to Order |
15 |
mt1-brass |
|
Complete Inner Magazine tube with spring, plunger and Forearm plug for .22 S, L, and LR .22 rifles. This fits models 1890/1906, 62, 62A, 61. The tube... |
$35.45 CLICK HERE for More Info or to Order
|
0 |
mt1 wop |
|
Inner Magazine tube ORIGINAL, including follower spring and follower-plug-- tube is is 17 1/2 inches in length, standard on all Winchester 22... |
$106.00 CLICK HERE for More Info or to Order |
17 |
mt3 |
|
This is a NEW Outer magazine tube replacement for S., L., and LR Winchester pump 22 guns. This fits models 1890, 1906, 61,62 , 62A 61. (All... |
$32.50 CLICK HERE for More Info or to Order |
14 |
mt2 |
|
Outer magazine tube replacement for S., L., and LR Winchester pump .22 models 1890, 1906, 62, 62A and 61 and 72. The slot is placed farther forward... |
$32.50 CLICK HERE for More Info or to Order |
28 |
mt2 wop |
|
This is the Outer magazine tube S., L., and LR Winchester pump .22 models 62, 62A and 61 and 72. It will also fit model 1890 and... |
$43.00 CLICK HERE for More Info or to Order |
50 |
mt1 |
|
This is a NEW Complete Inner Magazine tube Winchester models 1890, 1906, 62, 62A and 61 which shoot the SHORT, LONG or LONG RIFLE. This inner mag... |
$39.45 CLICK HERE for More Info or to Order |
86 |
wp731 |
|
hammer spring (mainspring) (also called the mainspring) that mounts on the lower tang and hammer stirrup. This spring provides the energy hammer to... |
$43.50 CLICK HERE for More Info or to Order |
39 |
wp47 |
|
This screw holds the main spring (hammer spring (mainspring)) in place. The screw goes through the lower tang and is attached to the anterior portion... |
$3.65 CLICK HERE for More Info or to Order |
31 |
wp58 |
|
This screw provides tension to the main spring (hammer spring (mainspring)) resulting in more pressure when the hammer strikes the firing pin when... |
$3.85 CLICK HERE for More Info or to Order |
318 |
wp206-a wop |
|
These are ORIGINAL hammer springs (mainspring --also called the mainspring) that mounts WITHIN the lower tang, attached by the mainspring screw... |
$56.00 CLICK HERE for More Info or to Order |
27 |
wp25-a |
|
This is a new Side plate also called Action Slide Cover for 1890 and 1906 62 or 62A Winchester pump 22 rifles. This plate slides from front to back... |
$23.50 CLICK HERE for More Info or to Order |
134 |
wp49 |
|
Screw that holds side plate in place on 1890 and 1906 Winchester pump .22 rifles. This part fits model 90 or model 06 or 62A |
$3.85 CLICK HERE for More Info or to Order |
275 |
wp25-b wop |
|
This is a ORIGINAL Side plate for 1890 and 1906 62 or 62A Winchester pump 22 rifles. This plate slides from front to back into the groove on the left... |
$39.00 CLICK HERE for More Info or to Order |
26 |
st130-a1 mbos |
|
Marble ORIGINAL No 6 front sight was used on LARGE CALIBER 1895 Winchester lever action rifles. Also sued on Model 56, 59,60,... |
$36.00 CLICK HERE for More Info or to Order
|
0 |
st42 |
|
This is a beautifully hand crafted front globe combination sight for your Winchester and Remington rifles. They were a special order option on the... |
$126.75 CLICK HERE for More Info or to Order
|
0 |
st202-c wop |
|
This was the Winchester factory issued ORIGINAL 75A front sight for the Winchester 1890 pump 22 rifle. Sights are in good condition, taken... |
$82.00 CLICK HERE for More Info or to Order |
2 |
st202-b wop |
|
Sight, Front ORIGINAL Winchester 75B - This front sight was used when greater post height was necessary on the Winchester Model 1903 and other 22... |
$76.50 CLICK HERE for More Info or to Order |
1 |
st202-a wop |
|
Sight, Front ORIGINAL Winchester 75C - At the Winchester factory this front sight was placed on Winchester model 74 rifles. This sight fits... |
$56.00 CLICK HERE for More Info or to Order |
1 |
st202-d wop |
|
Sight, Front ORIGINAL Winchester 75D - At the Winchester factory this front sight was placed on Winchester model 74 rifles. This sight fits... |
$76.00 CLICK HERE for More Info or to Order
|
0 |
st235-a wop |
|
Sight, Front ORIGINAL Winchester 77A - This sight fits into the standard Winchester 3/8 inch female dovetail and has a post that is 0.290 inches... |
$76.50 CLICK HERE for More Info or to Order |
3 |
st125 wop |
|
This was the Winchester factory issued ORIGINAL 77C front sight, the standard for Winchester 1906, 1902, and 1904, with some placed on the Model 61... |
$96.00 CLICK HERE for More Info or to Order |
7 |
st39 |
|
This is a NEW Rocky Mountain front sight that fits the Winchester 1873 1866 and other lever action rifles. It also fits into the Marlin, Mossberg and... |
$37.50 CLICK HERE for More Info or to Order |
13 |
st115 |
|
These are type 1 sight steps that fit all models of .22 rifles. There are three different thicknesses. .050, .060, and .085-.10. When ordering... |
$27.00 CLICK HERE for More Info or to Order
|
0 |
st211-b wop |
|
This is an ORIGINAL Winchester 2C elevator used principally on model 67 69 72 and model 74 model 32B rear sights. Also used for elevation on... |
$36.00 CLICK HERE for More Info or to Order |
56 |
st9869 |
|
Tang sight ORIGINAL Lyman for Winchester 1890, 1906 and 62. Has "WS" clearly stamped on underside of receiver base. |
$236.00 CLICK HERE for More Info or to Order
|
0 |
st9889 |
|
Marble tang sight ORIGINAL FOR Winchester 1890, 1906 AND 62. This sight has the correct W9 stamped underneath the base. Excellent condition. A very... |
$286.00 CLICK HERE for More Info or to Order
|
0 |
st9803 |
|
This is a marbles arms tang sight (aka Peep Sight) Winchester 1890 1906 62 and 62A. It comes with 3 different sight apertures (1/2 inch diameter with... |
$108.75 CLICK HERE for More Info or to Order
|
0 |
st11 |
|
This is a model 32-B rear replacement site with N0. 2B elevator for Winchester Model 1890 - 1906, 62A, 63, 67, 67A, 69, 60, 61, 63 and 1903... |
$23.75 CLICK HERE for More Info or to Order |
10 |
st200 wop |
|
Rear Sight Winchester model 32-B used on the majority of later production 22 rifles-- was placed on Model 59, 60, 61 62 62A 63 67 67A 69 69A72 74 75... |
$42.00 CLICK HERE for More Info or to Order |
106 |
st211-a wop |
|
A VERY RARE special order Rear Sight, the Winchester ORIGINAL No. 32C for Winchester 1906 and 75 Sporter, and was also used on Model 56, 57, 58,... |
$42.00 CLICK HERE for More Info or to Order |
2 |
st262-a wop |
|
This is the less-common ORIGINAL Winchester No. 32D Rear Sight. This sight was put on model 69 and 69A Winchester bolt action rifles. The blade is... |
$43.00 CLICK HERE for More Info or to Order |
3 |
stk62 |
|
This quality NEW black walnut stock that fits Winchester model 62 or 62A pump .22 rifles. The stock is slightly over sized to allow for fitting... |
$103.50 CLICK HERE for More Info or to Order |
5 |
stk62 E wop |
|
This is an original 62 or 62a stock in EXCELLENT condition. It it does not have the buttplate or screws. This is an ORIGINAL so color and finish... |
$138.00 CLICK HERE for More Info or to Order
|
0 |
wp40 |
|
This is the tang screw (also called the stock screw) Winchester 1890 and 1906 and model 62, 62A. This screw holds the stock to the receiver. |
$5.75 CLICK HERE for More Info or to Order |
231 |
wp66-a |
|
This is the long tang screw (stock bolt) that fits on the Winchester 1890, 1906, 62, 62A pump .22 rifle. This screw is a tad bit longer than the... |
$7.95 CLICK HERE for More Info or to Order |
22 |
wp71-i |
|
This is the screw that holds on the front of the Lyman and Marbles tang sight. It goes into the front hole (where the stock screw goes into the rear... |
$3.75 CLICK HERE for More Info or to Order |
72 |
wp53 |
|
Plug screw that fits into the upper tang on the 1890 or 1906, 1903, 62, 62A, 63 1866 1873 1876 1892 1894 1886 model 53 and 65 Winchester... |
$3.95 CLICK HERE for More Info or to Order |
198 |
wp497-b wop |
|
Here are some Winchester factory ORIGINAL triggers for Winchester model 61 Winchester FACTORY made not a reproduction |
$48.00 CLICK HERE for More Info or to Order |
3 |
wp271 wop |
|
Here are some Winchester factory ORIGINAL triggers for Winchester model 62A. These came FROM THE Winchester FACTORY to a gunsmith who specialized in... |
$48.00 CLICK HERE for More Info or to Order |
29 |
wp27-a wop |
|
This is an ORIGINAL Trigger for 1890 and 1906 Winchester. This part fits model 1890 or 1906 or 62. It is held in place by pin p112. (This trigger is... |
$19.00 CLICK HERE for More Info or to Order |
50 |
p112 |
|
This is the pin that holds the trigger in place on the Winchester 1890, 1906 , 62, 62A |
$4.50 CLICK HERE for More Info or to Order |
5 |
wp50 |
|
This is the trigger spring SCREW (Sear spring) - that fits the Winchester 1866, 1873, 1886, 1894, 1892, models 53, and 65. Also the 1890 1906 62 and... |
$3.85 CLICK HERE for More Info or to Order |
357 |
wp24-a |
|
Trigger spring for an 1890 - 1906 and model 62 pump 22 rifle. This spring sits in the lower tang and rest on the trigger. It is held in place by... |
$14.50 CLICK HERE for More Info or to Order |
6 |
wp30-b |
|
This is the coil style trigger spring LATE PRODUCTION Winchester 62A. This spring fits into the hole on the back of the trigger part number wp28B.... |
$4.50 CLICK HERE for More Info or to Order |
6 |
wp185-b wop |
|
Trigger spring 0RIGINAL for an 1890 - 1906 and model 62 pump 22 rifle. This spring sits in the lower tang and rests on the trigger. It is held in... |
$24.00 CLICK HERE for More Info or to Order |
9 |
wp185-a wop |
|
This is an ORIGINAL trigger spring screw (Sear spring) - that fits the Winchester 1866, 1873, 1886, 1894, 1892, models 53, and 65. Also the 1890 1906... |
$3.75 CLICK HERE for More Info or to Order |
33 |
wp28-b wop |
|
This is AN ORIGINAL trigger Winchester model 62/62A. This trigger has SERRATIONS on the trigger-pulling area and a hole in the back to accommodelate... |
$19.50 CLICK HERE for More Info or to Order |
2 |
manuals-62 62A |
|
This book is illustrated with many photos and very detailed directions about how to takedown your Winchester 62 or 62A firearm. It will first outline... |
CLICK HERE for More Info or to Order |
31 |