Item Id |
Origin |
Product Image |
Item Name+ |
Price |
Quantity |
set Scope |
|
|
If your rifle previously had a receiver mounted sight or scope it most likely used these holes. The screws that were used to hold the mount onto the... |
CLICK HERE for More Info or to Order |
101 |
set94post-c |
|
|
This is a discounted external screw set Winchester model 94 POST 64 Top eject Carbine. Your serial number should be from approximately 2,700,000 -... |
$55.75 CLICK HERE for More Info or to Order |
4 |
set94post-c wop |
Winchester Original Part |
|
This is an ORIGINAL discounted external screw set Winchester model 94 POST 64 Top eject Carbine. Your serial number should be from approximately... |
$82.00 CLICK HERE for More Info or to Order
|
0 |
manual-1894 |
|
|
This spiral bound book contains instructions on how to successfully disassemble your 1894 lever-action Winchester rifle. All 1894 rifles are... |
CLICK HERE for More Info or to Order |
46 |
wp278 wop |
Winchester Original Part |
|
This is and ORIGINAL front Barrel band Winchester 1894 and model 94 post 64 |
$53.00 CLICK HERE for More Info or to Order |
3 |
c167 |
|
|
This is the front barrel band screw Winchester 94 POST 64. This band uses the tapered screw part number c168. The regular front barrel band screw... |
$44.00 CLICK HERE for More Info or to Order |
5 |
c174 |
|
|
This is the front barrel band Winchester model 94 post 64 with a nickel finish. It will also fit the pre 64 1894 and the 1892 rifle. Use screw wp63 |
$38.00 CLICK HERE for More Info or to Order
|
0 |
c174-b |
|
|
This is the ORIGINAL front barrel band Winchester model 94 9422 . Tapered Original Barrel band screw included . |
$43.00 CLICK HERE for More Info or to Order
|
0 |
wp526 |
|
|
This is the front barrel band in GOLD Winchester 1892 or 1894 pre and post 64. It comes with a blued band screw. This is the band that sits behind... |
$38.50 CLICK HERE for More Info or to Order
|
0 |
wp277 wop |
Winchester Original Part |
|
This is an ORIGINAL rear barrel band Winchester 94 POST 64. This band goes around the wood forearm. |
$58.75 CLICK HERE for More Info or to Order |
2 |
c177-b |
|
|
This is the rear barrel band Winchester 94 POST 64 BIG BORE rifles. It fits big bore, trapper and trails Forearm models. The band is slightly larger... |
$37.00 CLICK HERE for More Info or to Order
|
0 |
c125-a |
Winchester Original Part |
|
This is the rear barrel band Winchester 94 POST 64. THis band goes around the forearm and uses screw C101A. |
$52.00 CLICK HERE for More Info or to Order
|
0 |
c175-b |
|
|
This is the screw front barrel band of the Winchester 94 POST 64 BIG BORE. It is slightly longer than the regular front band screw. the band is part... |
$4.25 CLICK HERE for More Info or to Order
|
0 |
c168 |
|
|
This is the TAPERED barrel band screw front band on the Winchester 94 POST 64. It fits band part number c167 |
$8.50 CLICK HERE for More Info or to Order
|
0 |
c103-a |
Winchester Original Part |
|
This is the screw that holds on the front barrel band Winchester model 94 POST 64 carbine. The front band sits behind the front sight. NOTE if you... |
$4.05 CLICK HERE for More Info or to Order |
1 |
c101-a |
Winchester Original Part |
|
This is the screw that holds on the rear barrel band on the Winchester model 94 POST 64 carbine rifle. It goes through the wooden forearm. NOTE ir... |
$4.25 CLICK HERE for More Info or to Order |
16 |
brl94-44c E 2886 |
Winchester Original Part |
|
This is an ORIGINAL 1894 Carbine barrel in EXCELLENT condition. The barrel length is 20 inches, round, and Winchester model 94 post 64 44-40 Caliber... |
$275.00 CLICK HERE for More Info or to Order
|
0 |
brlPOST64-375 N 3943 |
|
|
This originally purchased new, never on a gun, and is a 20 inch round barrel for the Winchester model 94 POST 64 . This is made for POST 64... |
$329.00 CLICK HERE for More Info or to Order |
1 |
brl94-44c-E 3947 |
Winchester Original Part |
|
This is a ORIGINAL used Winchester barrel in EXCELLENT condition. It is a 20 inch round barrel for the Winchester 94 (44-40 CALIBER) carbine.... |
$305.00 CLICK HERE for More Info or to Order
|
0 |
brlPOST64-3030c N 3943 |
Winchester Original Part |
|
This is a NEW 20 inch round barrel Winchester model 94 POST 64 (30-30). This is made POST 64 model carbines. This is not a cheap... |
$139.00 CLICK HERE for More Info or to Order |
1 |
brlPost94-30c-E 2877 |
Winchester Original Part |
|
This is a ORIGINAL used barrel in EXCELLENT condition 20 inch round barrel POST-64 Winchester 94 in 30 WCF (30-30 CALIBER). This barrel is made... |
$189.00 CLICK HERE for More Info or to Order |
3 |
brlPost94-30c G 2876 |
Winchester Original Part |
|
This is a ORIGINAL used barrel in GOOD condition 20 inch round barrel POST-64 Winchester 94 in 30 WCF (30-30 CALIBER). This barrel is made POST-64... |
$150.00 CLICK HERE for More Info or to Order |
1 |
wp217-a |
|
|
This is an original bolt Winchester 94 POST 64 TOP EJECT 30/30. It comes WITH the extractor, extractor pin, ejector, ejector spring and stop pin in... |
$113.00 CLICK HERE for More Info or to Order |
5 |
wp217-b wop |
Winchester Original Part |
|
This is an ORIGINAL bolt Winchester 94 POST 64 TOP EJECT 30/30. STRIPPED . Need is the firing pin, extractor, extractor pin, ejector,... |
$35.00 CLICK HERE for More Info or to Order |
4 |
wp217-d |
|
|
This is a complete bolt Winchester 94 post 64 Angle Eject (AE).Excellent condition , nice bluing. It is COMPLETE with everything, extractor ,... |
$95.00 CLICK HERE for More Info or to Order |
3 |
wp217-c wop |
Winchester Original Part |
|
This is a stripped bolt Winchester 94 post 64 Angle Eject (AE). This bolt uses the short ejector. |
$28.00 CLICK HERE for More Info or to Order |
8 |
c202 wop |
Winchester Original Part |
|
This is a stripped bolt Winchester 94 post 64 Angle Eject (AE). .357 cal ONLY This bolt uses the short ejector. part # c196 and extractor... |
$45.00 CLICK HERE for More Info or to Order |
2 |
bp879 |
|
|
This is the metal buttplate 1894 or 1892 Carbine lever action Winchester. It fits pre and post 64 1894 rifles. (The later pre 64 94's came with... |
$89.25 CLICK HERE for More Info or to Order
|
0 |
wp231 wop |
Winchester Original Part |
|
These are ORIGINAL large style slot head buttplate screws for regular black hardened plastic, crescent style and carbine style metal buttplates on... |
$9.25 CLICK HERE for More Info or to Order
|
0 |
wp57 |
|
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.95 CLICK HERE for More Info or to Order |
86 |
wp284 wop |
Winchester Original Part |
|
These are ORIGINAL style Phillips head buttplate screws FOR THE flat hard black plastic style buttplates found on the POST-64 Winchester... |
$5.75 CLICK HERE for More Info or to Order |
6 |
bp810 |
|
|
Buttplate Winchester model 94 post-64 and Winchester model 12 in 28 gauge. It is a reproduction of an original buttplate made from high quality... |
$21.25 CLICK HERE for More Info or to Order |
2 |
bp810 wop |
|
|
ORIGINAL Buttplate for the Winchester Model 94 post-64 and Winchester model 12 in 28 gauge. This is an original buttplate, made from high quality... |
$26.25 CLICK HERE for More Info or to Order |
1 |
bp803 |
|
|
This NEW buttplate fits Winchester models 60, 61, 1910, 67, 67A, 69, 72 and 1904. It is a reproduction of an original buttplate made from... |
$21.25 CLICK HERE for More Info or to Order
|
0 |
bp897 wop |
Winchester Original Part |
|
This is an ORIGINAL checkered metal buttplate that fits a number of Winchester rifles, including models 61, 1910, 67, 67A, 69, 72 and 1904 and the... |
$106.00 CLICK HERE for More Info or to Order |
1 |
c137 |
Winchester Original Part |
|
This is a newly machined carrier Winchester 94 POST 64 made here in the US. A very tallented gentelman fixed all of the money saving short-cuts... |
$86.00 CLICK HERE for More Info or to Order
|
0 |
c116 wop |
Winchester Original Part |
|
This is an ORIGINAL Winchester carrier for the POST 64 Winchester 94. This is a Milled ORIGINAL part! It IS FROM A top eject CARBINE and... |
$72.25 CLICK HERE for More Info or to Order |
5 |
c116 wop-b |
Winchester Original Part |
|
This is an ORIGINAL Winchester carrier for the POST 64 Winchester 94 in 30-30 (30WCF) caliber. This is a Stamped ORIGINAL part! |
$49.25 CLICK HERE for More Info or to Order
|
0 |
c134 |
Winchester Original Part |
|
This is a new milled carrier .357 mag Winchester 94 POST 64. |
$94.75 CLICK HERE for More Info or to Order |
23 |
c179 |
|
|
This is the carrier Winchester model 94 POST 64 angle/side and top eject 44 mag and 45LC. They are extremely well made from 4140 alloy steal (which... |
$104.00 CLICK HERE for More Info or to Order
|
0 |
c102-a |
Winchester Original Part |
|
This is the carrier screw Winchester model 94 POST 64. Also fits the 94 lever shotgun model 9410 |
$4.50 CLICK HERE for More Info or to Order |
171 |
c143 |
Winchester Original Part |
|
This is the carrier spring Winchester 94 POST 64 in 357 mag caliber. It is held in place by screw C105. |
$14.75 CLICK HERE for More Info or to Order |
15 |
c142 |
Winchester Original Part |
|
This is the cover carrier spring on the Winchester 94 POST 64 |
$14.25 CLICK HERE for More Info or to Order
|
0 |
c105-a |
Winchester Original Part |
|
This is the carrier spring screw Winchester model 94 POST 64. This holds the carrier spring (part number C117 or C143) to the receiver. |
$5.50 CLICK HERE for More Info or to Order |
171 |
c117 |
Winchester Original Part |
|
This is the carrier spring Winchester 94 POST 64 30-30 caliber rifles. |
$14.25 CLICK HERE for More Info or to Order |
38 |
c105-b |
Winchester Original Part |
|
This is the cartridge block 357 mag Winchester 94 POST 64. The screw used for this part is C104B |
$16.25 CLICK HERE for More Info or to Order |
6 |
c104-b |
Winchester Original Part |
|
This is the cartridge block screw .357 mag Winchester POST 64. It holds the cartridge block in place, part number C105B |
$5.25 CLICK HERE for More Info or to Order
|
0 |
c154 |
|
|
This is an ORIGINAL cartridge guide FOR THE LEFT side of a Winchester model 94 POST 64 30-30 cal receiver. |
$24.00 CLICK HERE for More Info or to Order |
18 |
c155 |
Winchester Original Part |
|
This is the LEFT cartridge guide Winchester model 94 POST 64 in 357 mag cal. |
$42.00 CLICK HERE for More Info or to Order |
1 |
c195-a |
Winchester Original Part |
|
This is the LEFT cartridge guide Winchester model 94 POST 64 44 caliber magnum. |
$36.50 CLICK HERE for More Info or to Order
|
0 |
c178-a |
|
|
This is the LEFT cartridge guide Winchester model 94 POST 64 45 colt caliber. The screw that holds the cartridge guide in place is part number C126A |
$39.00 CLICK HERE for More Info or to Order |
2 |
c159 |
|
|
This is an ORIGINAL RIGHT cartridge guide Winchester model 94 POST 64 30-30 cal (side with Loading gate (spring cover) This side... |
$38.75 CLICK HERE for More Info or to Order |
7 |
c157 |
Winchester Original Part |
|
This is the RIGHT cartridge guide Winchester model 94 POST 64 in 357 mag cal. |
$44.00 CLICK HERE for More Info or to Order |
1 |
c195-b |
Winchester Original Part |
|
This is the RIGHT SIDE cartridge guide Winchester model 94 POST 64 44 caliber magnum. |
$36.50 CLICK HERE for More Info or to Order
|
0 |
c191 |
|
|
This is the RIGHT cartridge guide Winchester model 94 POST 64 Angle Eject 45 colt caliber. The screw that holds the cartridge guide in place is part... |
$39.00 CLICK HERE for More Info or to Order |
1 |
c126-a |
|
|
This is the screw that holds in the cartridge guides on the 44 rem and 45 colt caliber Winchester 94 POST 64 angle eject rifles. |
$5.25 CLICK HERE for More Info or to Order
|
0 |
c118 |
Winchester Original Part |
|
This is the cartridge guide screw Winchester 94 POST 64. Will not work on cals 44 rem, 45C or 44-40 |
$4.50 CLICK HERE for More Info or to Order |
401 |
c126-b |
|
|
This is the cartridge stop Winchester 94 POST 64 top eject 44 mag. This part keeps the cartridges in the mag tube and stops them from going under the... |
$5.25 CLICK HERE for More Info or to Order
|
0 |
c196-EJECTOR |
|
|
This is the NEW and IMPROVED long-awaited ejector .357 cal Winchester model 94 POST 64. The talent and experience of a brilliant machinist who... |
$44.50 CLICK HERE for More Info or to Order
|
0 |
c198-wop |
|
|
This is the ejector .357 cal Winchester model 94 POST 64 ONLY . Original Item in excellent condition , hard to find. If you have a 30 30... |
$43.50 CLICK HERE for More Info or to Order |
2 |
c138-a |
Winchester Original Part |
|
This is the ejector spring Winchester 94 POST 64. It fits calibers 44 rem, 357 magnum and 45 colt. |
$6.75 CLICK HERE for More Info or to Order
|
0 |
c138-b |
|
|
This is the OUTER ejector spring 44 MAG ejector of the Winchester model 94 POST 64 Top eject. |
$6.50 CLICK HERE for More Info or to Order |
3 |
c102-b |
Winchester Original Part |
|
This is the ejector spring Winchester 94 post 64. It will NOT fit 44 rem, 45 colt or 357 mag |
$5.25 CLICK HERE for More Info or to Order |
2 |
c184 |
|
|
This is the pin that holds the ejector in place on the Winchester 94 POST 64 top eject bolt. Also fits the 94-22 |
$4.50 CLICK HERE for More Info or to Order |
8 |
c161 |
Winchester Original Part |
|
This is the ejector post 64 Winchester model 94 Angle eject series This is a short ejector , about 1 1/4 inch long . Ejector SPRING c102 ,... |
$41.00 CLICK HERE for More Info or to Order |
7 |
c201-a |
Winchester Original Part |
|
This is the ejector post 64 Winchester model 94 Angle eject series This is a LONG ejector , about 2 1/8 inch long . spring for it is... |
$35.00 CLICK HERE for More Info or to Order |
1 |
c178-b |
|
|
This is the ejector Winchester 94 POST 64 and for the 44 mag caliber. This ejector uses 2 ejector springs, unlike the other cal ejectors. |
$32.00 CLICK HERE for More Info or to Order |
2 |
c113 |
|
|
This is the extractor ANGLE eject Winchester 94 POST 64 in .357 caliber. (all other angle eject calibers use extractor part number C111) |
$39.75 CLICK HERE for More Info or to Order |
2 |
c111 |
|
|
This is the extractor ANGLE eject Winchester 94 POST 64 in all calibers Extractor retaining screw part # c141. WILL NOT... |
$38.75 CLICK HERE for More Info or to Order |
5 |
c128-b |
Winchester Original Part |
|
This is an ORIGINAL retaining pin (2 are required) that holds the extractor in place on the Winchester 94 POST 64. |
$5.50 CLICK HERE for More Info or to Order
|
0 |
c141 |
Winchester Original Part |
|
This is the retaining screw(s) that hold the extracor in place on the Winchester 94 POST 64. |
$4.50 CLICK HERE for More Info or to Order |
20 |
c128-a wop |
Winchester Original Part |
|
This is the extractor for all cals other than .357 magnum. It fits Winchester model 94 POST 64. (the .357 mag extractor is part number c113) this is... |
$27.25 CLICK HERE for More Info or to Order |
11 |
H105 wop |
Winchester Original Part |
|
This is an original finger lever Winchester 94 POST 64 ANGLE EJECT rifles. |
$67.00 CLICK HERE for More Info or to Order |
2 |
H101 |
|
|
This is the LARGE LOOP finger lever Winchester 1894 rifle. This is a replica of the figer lever that was used in the hit TV series The Rifleman. This... |
$131.25 CLICK HERE for More Info or to Order
|
0 |
c100-a |
|
|
This is the finger lever pin stop screw Winchester model 94 POST 64. The tip of this screw does not have threads on the Forearm. This screw is on the... |
$4.50 CLICK HERE for More Info or to Order |
37 |
c149 |
Winchester Original Part |
|
This is the pin that holds the finger lever into the bolt on the Winchester model 94 POST 64. The finger lever pin stop screw, part number C100A is... |
$6.75 CLICK HERE for More Info or to Order |
8 |
c162 |
|
|
This is the pin that attaches the finger lever to the link (part on under side of receiver) on the Winchester 94 POST 64. This is not the pin that... |
$7.75 CLICK HERE for More Info or to Order
|
0 |
c127-b |
Winchester Original Part |
|
This is the Rolled pin that attaches the finger lever to the link (part on under side of receiver) on the Winchester 94 POST 64. This is not... |
$4.25 CLICK HERE for More Info or to Order
|
0 |
H117 |
Winchester Original Part |
|
Gold Colored Finger lever TOP Eject Winchester 94 POST 64 Commemorative rifle. |
$79.00 CLICK HERE for More Info or to Order
|
0 |
H106 wop |
Winchester Original Part |
|
This is an ORIGINAL finger lever Winchester 94 POST 64 TOP Eject. Bluing varies due to these being original parts |
$72.00 CLICK HERE for More Info or to Order |
1 |
c119 wop |
Winchester Original Part |
|
This is the very hard to find firing pin Winchester model 94 POST 64. It fits the angle eject rifles. (will not work if your rifle was made before... |
$44.50 CLICK HERE for More Info or to Order
|
0 |
c150 |
Winchester Original Part |
|
This is the pin that holds the firing pin striker in place on the Winchester model 94 POST 64 |
$3.25 CLICK HERE for More Info or to Order
|
0 |
c148 |
Winchester Original Part |
|
This is the firing pin striker Winchester model 94 POST 64 |
$7.45 CLICK HERE for More Info or to Order |
14 |
c176-wop |
|
|
This is the hard to find firing pin Winchester model 94 POST 64 TOP EJECT ORIGINAL FIRING PIN . ready to install and use . If you have an later... |
$53.25 CLICK HERE for More Info or to Order |
1 |
c112 |
|
|
This is the for Forearm cap Winchester 94 POST 64 Rifle. It holds the wood forForearm on to the rifle with the OCTAGON barrel. This is different from... |
$90.00 CLICK HERE for More Info or to Order |
1 |
c125-b |
Winchester Original Part |
|
Forearm cap OCTAGON barrel Winchester 94 POST 64 Buffalo Bill Edition ORIGINAL wINCHESTER PART. This Forearm cap is for an octagon... |
$59.00 CLICK HERE for More Info or to Order
|
0 |
c101-b |
Winchester Original Part |
|
This is the screw that holds on the forearm cap Winchester model 94 POST 64 |
$6.50 CLICK HERE for More Info or to Order |
21 |
c114-a |
|
|
This is the Forearm cap for the Winchester 94 POST 64 Rifle. It holds the wood forearm onto the rifle with the ROUND barrel. This is different... |
$90.00 CLICK HERE for More Info or to Order |
1 |
c114-b |
|
|
This is the Forearm cap for the Winchester 94 POST 64 Rifle, large caliber (e.g., Lengendary Frontiers Man). It holds the wood forearm onto the... |
$62.00 CLICK HERE for More Info or to Order |
5 |
frm94com-r |
|
|
This is a high-quality black walnut forearm Winchester Commemorative 94 POST 64 ROUND barrel Rifle. 90 percent finished you will have to do a minimal... |
$92.00 CLICK HERE for More Info or to Order |
1 |
frm1894pre64 G wop |
Winchester Original Part |
|
Here is an ORIGINAL pre-64 Winchester 94 forearm CARBINE ROUND barrel, in GOOD condition. This is held on by the barrel band and all wood on this... |
$68.00 CLICK HERE for More Info or to Order |
2 |
frm94-p45 |
|
|
This is a high quality black walnut forearm Winchester 94 POST 64 carbine in calibers 44 and 45 cal. If you have the 30-30 cal carbine see frm94post.... |
$73.00 CLICK HERE for More Info or to Order
|
0 |
frm94-pc |
|
|
This is a high quality black walnut forearm Winchester 94 POST 64 carbine.(The carbines use the barrel bands that hold the forearm on and magazine... |
$76.00 CLICK HERE for More Info or to Order |
11 |
frm94-pc wop |
Winchester Original Part |
|
This is an original Forearm Winchester model 94 carbine that was made AFTER 1964. The finish varies due to the originality of the part. This forearm... |
$65.00 CLICK HERE for More Info or to Order |
3 |
frm94E-pc wop |
Winchester Original Part |
|
This is an EXCWELLENT condition like new ORIGINAL Forearm Winchester model 94 carbine that was made AFTER 1964. The finish varies... |
$96.00 CLICK HERE for More Info or to Order |
1 |
frm94PcomC wop |
Winchester Original Part |
|
A stunning Forearm, all checkerd and with original fininsh, Winchester 94 POST 64 Commemorative carbine ORIGINAL |
$96.00 CLICK HERE for More Info or to Order
|
0 |
frm94-pro |
|
|
This is a high quality black walnut forearm Winchester 94 POST 64 OCTAGON barrel Rifle. 90 percent finished you will have to do minimal fitting to... |
$76.50 CLICK HERE for More Info or to Order
|
0 |
frm94-prr |
|
|
This is a high quality black walnut forearm Winchester 94 POST 64 ROUND barrel Rifle. 90 percent finished you will have to do minimal fitting to your... |
$76.50 CLICK HERE for More Info or to Order
|
0 |
frm94Post64-e wop |
Winchester Original Part |
|
Here is an ORIGINAL post-64 Winchester 94 forearm CARBINE ROUND barrel, in EXCELLENT condition. This is held on by the barrel band and all wood on... |
$79.00 CLICK HERE for More Info or to Order |
1 |
frm94com-o |
|
|
This is a high-quality black walnut forearm Winchester Commemorative 94 POST 64 OCTAGON barrel Rifle. 90 percent finished you will have to do a... |
$92.00 CLICK HERE for More Info or to Order
|
0 |
frm94-9422-E wop |
Winchester Original Part |
|
Here is an ORIGINAL Winchester 9422 forearm with XX wood in EXCELLENT condition. This is held on by the barrel band and all wood on this... |
$84.00 CLICK HERE for More Info or to Order |
1 |
c160 |
Winchester Original Part |
|
This is the friction stude Winchester model 64 POST 64. This part helps keep the link in place when the lever is closed. |
$12.00 CLICK HERE for More Info or to Order |
1 |
c181 |
|
|
This is the friction stud that goes in the stock Forearm of the link (link is the part that the finger lever goes through) This little stud has a... |
$8.95 CLICK HERE for More Info or to Order
|
0 |
c153 |
Winchester Original Part |
|
This is the little spring that goes around the Forearm of the friction stud on the Winchester model 94 POST 64. |
$5.00 CLICK HERE for More Info or to Order
|
0 |
c180 |
|
|
This is the friction stud SPRING that goes in the stock Forearm of the link (link is the part that the finger lever goes through) This little... |
$4.15 CLICK HERE for More Info or to Order |
4 |
c158 |
Winchester Original Part |
|
This is the pin that holds the friction stud in place on the Winchester model 94 POST 64 link |
$3.65 CLICK HERE for More Info or to Order |
16 |
c147 |
Winchester Original Part |
|
This is the screw that holds the hammer in place on the Winchester model 94 POST 64 |
$4.25 CLICK HERE for More Info or to Order |
174 |
c166 |
|
|
This is the hammer spring (mainspring) guide rod Winchester 94 POST 64 |
$42.50 CLICK HERE for More Info or to Order |
2 |
c106 |
|
|
This is the hammer spring (mainspring) also called the mainspring Winchester 94 POST 64. This is the coil type mainspring that fits over the hammer... |
$7.50 CLICK HERE for More Info or to Order |
13 |
c194-b wop |
Winchester Original Part |
|
Hammer Spur Extension Winchester 94 post-64 ORIGINAL. This is for the 9410 series of angle and top eject rifles. The threaded end... |
$16.00 CLICK HERE for More Info or to Order
|
0 |
c170 |
|
|
This is the hammer stop plunger spring Winchester model 94 POST 64 |
$5.25 CLICK HERE for More Info or to Order
|
0 |
c192 |
|
|
This is the Hammer stop plunger Angle eject Winchester model 94 POST 64 |
$5.25 CLICK HERE for More Info or to Order |
9 |
c187 |
|
|
This is the hammer Winchester 94 POST 64 rifle. It fits serial numbers above 4,580,000. The mainspring and sear set up are pictured below. |
$38.00 CLICK HERE for More Info or to Order |
4 |
c194-a wop |
Winchester Original Part |
|
This is the hammer for Winchester 94 POST 64 AE (angle eject) rifle. It fits those guns that have a hammer spur extension (part... |
$43.00 CLICK HERE for More Info or to Order
|
0 |
c186 |
Winchester Original Part |
|
This is the hammer Winchester 94 POST 64 top eject rifle that is Nickel Plated for factory special models. This is a factory original... |
$58.75 CLICK HERE for More Info or to Order |
1 |
wp280 wop |
Winchester Original Part |
|
Here is an ORIGINAL used hammer POST-64 Winchester 94 top eject rifle. It looks to have been previously installed on a rifle with minor wear marks... |
$51.00 CLICK HERE for More Info or to Order |
1 |
c100-b |
Winchester Original Part |
|
This is the link pin stop screw Winchester 94 POST 64. It fits rifles with serial number above 5,500,001, It also fits the model 9410 shotgun |
$5.50 CLICK HERE for More Info or to Order |
36 |
c140 |
Winchester Original Part |
|
This is the link pin Winchester 94 POST 64 over serial number 5,500,001. This pin attaches your link to the receiver. The screw that holds this pin... |
$5.50 CLICK HERE for More Info or to Order |
21 |
c163 |
|
|
This is the link screw Winchester model 94 POST 64. It fits top eject and angle eject below serial number 5,550,001 |
$4.25 CLICK HERE for More Info or to Order |
131 |
c188 wop |
|
|
This is the link Winchester 94 POST 64 early top ejects.COMPLETE This link have the internals, If you are having problems with... |
$74.00 CLICK HERE for More Info or to Order |
1 |
c133 |
Winchester Original Part |
|
This is the link SPECIFICALLY 357 mag in POST 1964 PRODUCTION Winchester 94 rifles. This link does not have the internals, but you can choose on the... |
$63.75 CLICK HERE for More Info or to Order
|
0 |
c129 |
|
|
This is stripped link for the POST 64 Winchester 94. It fits Angle eject rifles in .450 marlin caliber. It does NOT have the friction stud,... |
$55.00 CLICK HERE for More Info or to Order |
1 |
c132 |
Winchester Original Part |
|
This is a link POST 64 Winchester 94. It fits rifles above serial number 5,550,001 This link does NOT have the internals, If you need the friction... |
$62.75 CLICK HERE for More Info or to Order
|
0 |
c145 |
Winchester Original Part |
|
This is the link Top Eject Winchester 94 POST 64 in cals 44 rem, 45 colt, 44-40 Winchester and 444 marlin. This link does not have the internals, but... |
$72.75 CLICK HERE for More Info or to Order
|
0 |
c175-a |
|
|
This is the Loading gate (spring cover), also called spring cover Winchester 94 POST 64 in.357 mag. It fits .357 mag angle eject above serial number... |
$37.50 CLICK HERE for More Info or to Order |
6 |
c136 |
|
|
This is the Loading gate (spring cover), also called spring cover Winchester 94 POST 64 angle eject in 44 rem and 45 colt caliber. Note: The Loading... |
$41.00 CLICK HERE for More Info or to Order |
2 |
c172 |
Winchester Original Part |
|
This is the brass plated Loading gate (also called spring cover) for the Winchester POST 64 model 94. The screw that holds the Loading gate... |
$44.00 CLICK HERE for More Info or to Order
|
0 |
c197 |
Winchester Original Part |
|
This is the nickel-plated Loading gate (also called spring cover) for the Winchester POST 64 model 94. The screw that holds the Loading gate... |
$45.00 CLICK HERE for More Info or to Order
|
0 |
c131 |
Winchester Original Part |
|
ORIGINAL Spring cover Winchester 94 POST 64 IN 30-30 CAL only. Note: The Loading gate (spring cover) for .357 is part number (c175-a)., 450 marlin,... |
$48.25 CLICK HERE for More Info or to Order |
4 |
c104-a |
Winchester Original Part |
|
This is the screw that attaches the Loading gate (spring cover) to the receiver of the Winchester model 94 POST 64. It is used with all... |
$4.25 CLICK HERE for More Info or to Order |
26 |