WinB

This is a discounted external screw set Winchester 1873 22 caliber rifle. This set includes 2 Forearm cap screws (wp56); 2 Finger lever spring/...

This is a newly made front barrel band Winchester 1866 and 1873 carbine Made for the original Winchester not reproduction and comes in the...

This is the rear barrel band screw Winchester 1886 lever action carbine. This is the screw that goes through the type 2 band that holds the wooden...

This is the CENTER barrel band screw Winchester 1873 MUSKET. It has been made LARGER than the standard screw for stripped out barrel bands. You will...

This is the REAR barrel band screw Winchester 1873. This screw is designed to fix stripped threads in the barrel band (which happForearms quite often...

This is the Carrier lever spring 1873 Winchester. This spring fits inside and on the bottm-right of the receiver(the side with the Loading gate...

Spring that puts tension on the carrier lever Winchester 1876. Use screw number 604 to attach to receiver.

This is the cartridge stop Winchester 1873 .22 cal carrier block. It screws into the side of the carrier with screw wp603-b. This part holds the...

This is a NEW Slide cover, also called the Dust or Mortise Cover, Winchester 1873. It slides onto the rail and keeps dust and dirt out of the...

This is the dust cover stop 1873 and 1876 Winchester lever action 2nd and 3rd model. (also called the mortise cover stop) This little part screws on...

This is the ejector collar Winchester 1886 lever action rifle. This part holds the ejector spring onto the ejector.

This is the ejector Winchester 1886 lever action rifle. This is an  ORIGINAL  It fits all calibers. This part sits in the breechbolt...

This is the extractor .32-20 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor itself is a spring....

This is the extractor Winchester 1876. There is no spring associated with this extractor because the extractor itself is a spring. It is CNC machined...

This is the finger lever bushing pin Winchester 1886.ORIGINAL  This split pin secures the bushing in place. One Forearm of the pin sits in one...

This is the finger lever cam Winchester 1876 rifle. This little part fits into your finger lever and is what the finger lever spring rides on. It...

This is the finger lever latch with a LARGE head for the early Winchester 1873. Before serial number 28,000. This latch is on the lower tang and...

This is the finger lever latch with a small head early Winchester 1873, before serial number 28,000. This was also the latch used on the model 1866....

This finger lever spring attaches inside on the left of the receiver.(the side with out the Loading gate (spring cover)) This replacement spring...

Spring that puts tension on the finger lever Winchester 1876. Use screw number wp604-a to attach to the receiver.

This is the pin that attaches the finger lever to the link on the Winchester 1876 lever action rifle.

This is an ORIGINAL firing pin Winchester 1886. This pin was will fit rifles with serial number 120,000 to 130,000. It was used interchangeably with...

This is the firing pin lock spring screw Winchester model 1895.  The screw fits into the firing pin lock spring on the underside of the...

This is the firing pin retractor Winchester 1876 lever action rifle. It is unique to this model. It is inserted into the breechbolt on lower left...

This is the firing pin Winchester 1873 .32-20 caliber lever action rifle. These are new firing pins.

This is a NEW firing pin 2nd and 3rd model Winchester 1873 .44 and .38 caliber lever action rifle. If you have a 1st model you need part number 748...

This is the forearm Cap for the Winchester 1886 lever action rifle. This is  NEW part made especially for the 1886 with an octagon barrel. ...

This is the forForearm tip tenon Winchester 1886. This part sits in a cut out on the under side of the barrel. There are NO screw hole tapped forearm...

This is the locking bolt pin Winchester 1892, model 65 and 53. This pin connects the left and right locking bolts with the finger lever. It has a cut...

This is the magazine ring (also called mag hanger) Winchester 1892 rifle in small caliber (25 and 32 cals etc),and model 53 It is take down version...

This is the magazine tube holder (mag hanger, mag ring) Winchester 1876 lever action rifle. It is unique to this model. The same mag hanger was used...

This is the button magazine plug Winchester model 1894, 1892, 1873 large cal rifles. If you have a rifle (that has the forearm cap--not the carbine...

This is the magazine plug Winchester 1886 rifles that have the 1/2 and 3/4 length magazine tube. This plug ha NO LIP on the edge and has the slot cut...

This is the magazine plug Winchester 1873 and 1892 small cal rifles (.25 and .32) that have the 1/2 and 3/4 length magazine tube. This plug HAS a lip...

This is the magazine plug first model Winchester 1873 lever action rifle. This plug fits the THREADED magazine tube of the large cal rifles. This...

This is the complete magazine tube plug Winchester 1886 TAKEDOWN version of the rifle. If is rifles that have the 1/2 and 3/4 length magazine tube....

This is the complete magazine tube plug Winchester 1886 takedown version of the rifle. It is rifles that have the full length magazine tube. It is...

This is the type 1 magazine plug used through out production of the 1876. FYI (type 2 plugs were also used through out production but did not have a...

This is the 25 3/4 inch magazine tube Winchester 1886 TAKEDOWN model gun . The tube is machined at the receiver Forearm with the coarse 8 threads per...

This is the complete inner magazine tube assembly Winchester 1873 .22 caliber rifle. This tube fits rifles with a 26 inch barrel. This is a hard to...

This is the 26 inch magazine tube Winchester 1892 TAKEDOWN model in 38 and 44 calibers. It is also the magazine tube Winchester 1894 TAKEDOWN...

This is the 27 3/4 inch magazine tube Early Winchester large cal FIRST model and some second model Rifles and carbines to serial number 50,000. It is...

This is the saddle ring and staple Winchesterchster 1866, 1873 and 1892. This came from the factory pressed into the receiver.

This is the sear spring screw Winchester model 1895. This hard to find little screw goes up through the lower tang and threads into your sear spring....

This is an exquisite replacement front sight Winchester rifles. It is modeled after the number 21 front sight with the silver blade and set screw....

This is the swivel 1 inch sling that attaches to the magazine tube on your Winchester 1873 1892 and 1894 rifles. It fits all of the 1894 models and...

These 3 screws are housed in the takedown extension of the 1892, 1894 and 1886 Winchester lever action rifles. They hold the union between the...

This is the Tenon for A Forearm cap on the Winchester 1873 1892 and 1894. 1866 uses this tenon after serial number 134,500. This part sits in a...

This is the toggle Link pin Winchester 1876. This pin slides along the grooves cut out on the sides of the toggle links. Front and rear pins are the...