| Item Id |
Origin |
Product Image |
Item Name+ |
Price |
Quantity |
wp48-a |
|
|
Takedown (Assembly)replacement (NEW) screw for either a Winchester 1890 - 1906 - 62 - 62A pump 22 rifle. This secures receiver to the trigger... |
$22.45
CLICK HERE
for More Info
or to Order |
9 |
s29-a |
|
|
A NEW Barrel (takedown) Screw for Stevens Crackshot (model 17) |
$23.00
CLICK HERE
for More Info
or to Order |
5 |
s30-b |
|
|
Screw for the Breech Block on a Stevens Crackshot. This screw goes across the receiver and holds the breech-block in place. |
$3.49
CLICK HERE
for More Info
or to Order |
8 |
s2-b |
|
|
NEW Screw for the Breech Block (Bolt) on a Stevens Favorite 1915 model. This screw is made here in the us for the vintage Stevens Favorite rifle.... |
$6.75
CLICK HERE
for More Info
or to Order
|
0 |
s59-b |
|
|
Buttplate Screw NEW for Stevens Junior, Crackshot, Maynard Jr, and other smaller Stevens 22 rifles. |
$6.95
CLICK HERE
for More Info
or to Order |
16 |
wp779-a |
|
|
This is the TYPE 1 carrier spring Winchester 1895. This spring was used with the type one flatside receiver to circa serial number 50,000. |
$30.25
CLICK HERE
for More Info
or to Order
|
0 |
wp71-c86 |
Winchester Original Part |
|
This is AN ORIGINAL carrier spring Winchester model 1886. It is located on the underside of the upper tang and put pressure on the carrier to... |
$52.00
CLICK HERE
for More Info
or to Order
|
0 |
wp71-c |
|
|
This is a new carrier spring made specifically for the PRE 64 Winchester models 1894, 64 and 55. It fastens to the inside of the receiver... |
$33.75
CLICK HERE
for More Info
or to Order
|
0 |
wp564 |
|
|
This is a new carrier Winchester model 1894 (PRE 64)and model 64 and model 55. It is milled- not stamped- Very well made! |
$89.00
CLICK HERE
for More Info
or to Order
|
0 |
c179 |
|
|
This is the carrier Winchester model 94 POST 64 angle/side and top eject 44 mag and 45LC. They are extremely well made from 4140 alloy steal (which... |
$104.00
CLICK HERE
for More Info
or to Order |
7 |
wp758 |
|
|
This is the cartridge stop spring Winchester 1892, model 53 and model 65 . It sits in the left cartridge guide and fits all calibers. This spring is... |
$16.25
CLICK HERE
for More Info
or to Order |
84 |
wp729 |
|
|
This is a NEW extractor for Models 1892, 1894, 64, 53 and 55 Winchester. It fits all calibers model 1894, 64, 53 and 55. This will fit on... |
$35.50
CLICK HERE
for More Info
or to Order
|
0 |
wp26-a |
|
|
This is an Extractor for 1890 and 1906, 6 or 62A Winchester pump 22 rifles (also fits Rossi model 62 rifles). This part sits on the right side of the... |
$48.25
CLICK HERE
for More Info
or to Order
|
0 |
s161-a |
|
|
Extractor 1st variation for mid-production 1894 Stevens Favorite NEW -- this is a NEW part. This extractor type is the center style and is 0.200... |
$49.00
CLICK HERE
for More Info
or to Order |
8 |
s160-a |
|
|
Extractor 2nd variation for mid-production 1894 Stevens Favorite NEW This type is the center style and is 0.200 inches wide from top to... |
$39.00
CLICK HERE
for More Info
or to Order |
6 |
s164-a |
|
|
Extractortor for the 2nd variation mid production 1894 Stevens Favorite rifles. This type is the center style and is 0.200 inches wide... |
$42.00
CLICK HERE
for More Info
or to Order |
12 |
wp132 |
|
|
This is the SPRING for the extractor plunger Winchester model 63 |
$5.50
CLICK HERE
for More Info
or to Order
|
0 |
rp11 |
|
|
Spring that puts tension on the extractor Remington pump .22 rifles. It fits model 12, 12A, 12B, 12C and model 121 It is .5 inches long and the OD is... |
$4.50
CLICK HERE
for More Info
or to Order |
11 |
s33-a2 |
|
|
Extractor for the Stevens 26 Crackshot .22 rifle. This is a NEW quality reproduction part and is being sold with the pin. |
$29.00
CLICK HERE
for More Info
or to Order
|
0 |
wp737 |
|
|
This is the extractor Winchester 1892 25.20 and 32.20 cal rifles. (The extractor large cal 1892 rifle is part number 729) The extractor is held in... |
$32.50
CLICK HERE
for More Info
or to Order |
18 |
wp26-b |
|
|
Extractor(ejector) 1890 WRF pump 22 rifle. This extractor wil NOT work on the SHORT and LONG - LONG RIFLE 1890 models, (only the WRF models) If your... |
$32.50
CLICK HERE
for More Info
or to Order
|
0 |
s159-a |
|
|
Extractortor for the 1915 Stevens Favorite. This is a NEW part and this part is for the last group on Favorite rifles produced from 1915... |
$46.00
CLICK HERE
for More Info
or to Order
|
0 |
s9-b |
|
|
NEW Screw for Finger lever Stevens Favorite 22 rifle. Late production 1915 version with a thin (0.065") head. - also Breech bolt screw... |
$6.75
CLICK HERE
for More Info
or to Order |
12 |
s9-a |
|
|
Screw NEW for Finger lever Stevens Favorite 22 rifle. This screwfits early production rifles, and has a thick head (0.95")-with strong threads. |
$6.75
CLICK HERE
for More Info
or to Order |
18 |
wp502-c wop |
Winchester Original Part |
|
This is an ORIGINAL finger lever pin. The pin fits Winchester model 1894/64/55 and holds the finger lever to the bolt, providing a pivot lever to... |
$7.50
CLICK HERE
for More Info
or to Order |
1 |
p146 |
|
|
Fits Winchester model 1894/64/55 and Winchester 1892/65/53. This is the pin that goes through the Forearm of the finger lever and attaches it to the... |
$5.75
CLICK HERE
for More Info
or to Order |
14 |
s110-b |
|
|
Firing Pin with rounded tip for the later production Stevens 1915 Favorite. If you have an erlier model you will need a longer firing pin. |
$18.00
CLICK HERE
for More Info
or to Order |
2 |
wp741 |
|
|
This is a New Firing pin Winchester 22 pump rifle. This part fits model 1890 or 1906 (the firing pin 62 or 62A model is part numBer 742) The firing... |
$48.75
CLICK HERE
for More Info
or to Order
|
0 |
s6-a |
|
|
This is a NEW firing for your Stevens favorite.Firing pin with chisel tip for the 1889/1894 Stevens Favorite. |
$17.50
CLICK HERE
for More Info
or to Order |
13 |
s26-b |
|
|
This is a New Firing pin for your Stevens Crackshot Mod 26. |
$19.75
CLICK HERE
for More Info
or to Order
|
0 |
wp2-a |
|
|
Firing pin stop for 1890 and 1906 and early model 62 Winchester pump .22 rifles. This goes on the left side of the bolt and keeps the firing pin in... |
$29.25
CLICK HERE
for More Info
or to Order |
171 |
wp2-c |
|
|
This is the firing pin stop Winchester 62A. It takes the firing pin stop pins and the holes are located in a slightly different place unlike the 90 -... |
$13.75
CLICK HERE
for More Info
or to Order |
21 |
p144 |
|
|
This is the Firing pin striker stop pin Winchester 1894 and model 64 and model 55 . This is not a solid pin alloWinchesterg it to be press-fitted... |
$2.25
CLICK HERE
for More Info
or to Order |
23 |
wp599 |
|
|
This part fits the Winchester 1894 lever action rifle and model 64 and model 55 . The striker is the part of the firing pin assamebly that is sruck... |
$12.00
CLICK HERE
for More Info
or to Order |
2 |
wp740 |
|
|
This is the firing pin Winchester model 1886. It fits all serial number ranges. |
$39.50
CLICK HERE
for More Info
or to Order
|
0 |
wp750 |
|
|
This is the firing pin Winchester 1892 and model 65. It is for smokeless powder rounds. The tip diam is .070 |
$36.50
CLICK HERE
for More Info
or to Order
|
0 |
wp751 |
|
|
This is the firing pin Winchester 1892 lever action rifle. It is made for shooting the black powder rounds. The tip diam is .106 |
$32.75
CLICK HERE
for More Info
or to Order |
9 |
wp749 |
|
|
This is the firing pin for Winchester 1894 lever action rifle also for model 64 and model 55. It fits all calibers. Note: Winchester made 2 types of... |
$40.50
CLICK HERE
for More Info
or to Order
|
0 |
rp2 |
|
|
This screw holds the scalloped forearm screw (rp1, rp61-b) in place on the Remington model 12 and 12c. If you would prefer a original screw see part... |
$5.85
CLICK HERE
for More Info
or to Order |
16 |
s7-a long |
|
|
Screw for the later and longer Forearm on a Stevens Favorite. The screw fits Favorite MODELS that have the 8" wood forearm to the barrel. |
$9.50
CLICK HERE
for More Info
or to Order |
1 |
rp38 |
|
|
This is the SCALLOPED forearm screw Remington model 121 (it is different than the model 12 scalloped screw) |
$5.25
CLICK HERE
for More Info
or to Order |
20 |
rp1 |
|
|
A new Scalloped forearm screw Remington model 12, 12c. The forearm lock screw ( rp 2 ) holds the scalloped screw in place. If you would like an... |
$6.25
CLICK HERE
for More Info
or to Order |
13 |
s7-a short |
|
|
Screw for Forearm on a Stevens Favorite. The screw fits Favorite MODELS 1889, 1894, AND 1915. This screw holds the 6" wood forearm to... |
$9.50
CLICK HERE
for More Info
or to Order |
11 |
s174-a sop |
|
|
Forearm Screw for the Visible Loader Stevens Model 70. This screw holds the wooden forearm to the action slide. This is a NEW part. |
$7.50
CLICK HERE
for More Info
or to Order |
4 |
s12-b |
|
|
This is a NEW thick head Screw for the Hammer/trigger on 1889/1894 Stevens Favorite rifles. The head is 0.095 inches thick |
$3.25
CLICK HERE
for More Info
or to Order |
24 |
s40-d |
|
|
Hammer Screw for the Stevens Crackshot 22 rifle. This is for the side lever model and can also be used for the trigger and lever pin roll screw. also... |
$6.25
CLICK HERE
for More Info
or to Order |
5 |
wp731 |
|
|
hammer spring (mainspring) (also called the mainspring) that mounts on the lower tang and hammer stirrup. This spring provides the energy hammer to... |
$39.50
CLICK HERE
for More Info
or to Order |
2 |
wp621-a |
|
|
This is the screw that holds the hammer spring (also called mainspring) in place on the Winchester 1873 AND 1866 lever action rifle. |
$5.25
CLICK HERE
for More Info
or to Order |
52 |
s40-b |
|
|
This screw fits ALL of the Following ---Hammer, Trigger and Lever Pin Roll Screw -- on the the Stevens Crackshot 22 rifle. This replacement... |
$6.25
CLICK HERE
for More Info
or to Order
|
0 |
p141 |
|
|
This is the pin that secures the link to the bottom front of the receiver on the Winchester 1894 and model 64 and model 55 . The lateral groove in... |
$6.50
CLICK HERE
for More Info
or to Order |
27 |
wp9-c |
|
|
Spring cover (Loading gate (spring cover) cover) Winchester 1892 lever action. This fits the 25-20 and 32-20 cal rifles as well as model 53 and 65. |
$53.50
CLICK HERE
for More Info
or to Order
|
0 |
wp9-b |
|
|
Spring cover (Loading gate (spring cover) cover) Winchester 1892 lever action. This fits the 38-40 and 44-40 cal, and model 53 |
$57.50
CLICK HERE
for More Info
or to Order
|
0 |
wp9-a |
|
|
Spring cover (Loading gate (spring cover) cover) Winchester Pre 64 1894, model 64 and model 55 lever action rifle. This fits all calibers... |
$44.50
CLICK HERE
for More Info
or to Order
|
0 |
wp484 |
|
|
This is a NEW locking bolt for the pre 64 Winchester 1894 and Model 64 and Model 55 . It is .005 oversized to compensate for excessive head space on... |
$68.00
CLICK HERE
for More Info
or to Order |
10 |
wp509 |
|
|
This is a locking bolt pre 64 Winchester 1894 and model 64 and model 55 . It is .010 oversized to compensate for excessive head space on your rifle |
$68.00
CLICK HERE
for More Info
or to Order
|
0 |
wp483 |
|
|
This is a locking bolt pre 64 Winchester 1894 and model 64 and model 55 . It is .015 oversized to compensate for excessive head space on your rifle |
$68.00
CLICK HERE
for More Info
or to Order |
8 |
wp717-a |
|
|
This is a NEW magazine follower for 38/40 and 44/40 caliber Winchester 1866 and also fits 1873. This is the second type of follower 1866... |
$23.75
CLICK HERE
for More Info
or to Order |
28 |
wp711-b |
|
|
This is the magazine follower for all models of the the 32/20 Winchester 1873.This part sits toward the receiver Forearm of the magazine tube and... |
$22.75
CLICK HERE
for More Info
or to Order
|
0 |
wp718-a |
|
|
This is the magazine follower Winchester 1892 .25-.20 /.32-.20. also model 65 and 53. This part sits in the receiver Forearm of the magazine tube and... |
$17.85
CLICK HERE
for More Info
or to Order |
12 |
wp722 |
|
|
This is the older machine type magazine follower Winchester 1892 and 1894 (all cals in 1894, large cals- .38, .44 in the 1892) this is also the... |
$18.00
CLICK HERE
for More Info
or to Order |
25 |
wp175-b |
Winchester Original Part |
|
This is an ORIGINAL older MACHINED style magazine follower for the Winchester model 1886 and model 71 lever action rifle. |
$44.50
CLICK HERE
for More Info
or to Order
|
0 |
wp728 |
|
|
This is the hanger that attaches to the underside of the barrel on the Winchester 1873 and 1892 rifle or carbine in 25-20 or 32-20 cal. This will not... |
$32.50
CLICK HERE
for More Info
or to Order |
6 |
wp471 |
|
|
This is the magazine ring (also called mag hanger) Winchester 1892 rifle in small caliber (25 and 32 cals etc),and model 55 and 64. It is take down... |
$36.00
CLICK HERE
for More Info
or to Order |
6 |
wp725-a |
|
|
This is the front hanger with a slightly larger base for worn dove tail slots on the barrel. What can happen is if you don't know that the... |
$49.75
CLICK HERE
for More Info
or to Order
|
0 |
wp724 |
|
|
Front Magazine Hanger (magazine ring) for 1890,1906, 62, 62A and model 61 Winchester pump .22 rifles. This hanger does not have a slot for... |
$39.50
CLICK HERE
for More Info
or to Order |
2 |
wp725-b |
|
|
This is the hard to find slotted front Magazine Hanger (magazine ring) for 1890 and 1906 Winchester pump .22 rifles. It has a groove cut in the... |
$27.50
CLICK HERE
for More Info
or to Order |
24 |
wp723 |
|
|
Rear Magazine Hanger (magazine ring) for 1890 and 1906 Winchester with hole for magazine securing pin. The pin (wp723pin) comes as an option and... |
$39.50
CLICK HERE
for More Info
or to Order |
11 |
wp792-b |
|
|
This is the magazine ring (also called mag hanger) Winchester 1892 and 1894 rifles in large caliber (30 30; .38 .44 etc),and model 53. It is take... |
$38.00
CLICK HERE
for More Info
or to Order
|
0 |
wp796-b |
|
|
This is the magazine ring (also called mag hanger) Winchester 1892 and 1894 rifles in large caliber (30 30; .38 .44 etc),and model 53. It is take... |
$37.25
CLICK HERE
for More Info
or to Order
|
0 |
wp727-b |
|
|
This is the magazine ring (also called mag hanger) Winchester model 1886 lever action TAKE DOWN model. This ring is unique to the 1886 and has a... |
$34.50
CLICK HERE
for More Info
or to Order |
22 |
wp726 |
|
|
This magazine ring (mag hanger) will fit Winchester 1894 (all calibers) It will also fit the 1866 (after 16,000) and 1873 in .38 and .44 cal. Also... |
$38.50
CLICK HERE
for More Info
or to Order
|
0 |
wp727-a |
|
|
This is the magazine ring (also called mag hanger) Winchester model 1886 lever action rifle. This ring is unique to the 1886 solid frame and has a... |
$34.50
CLICK HERE
for More Info
or to Order |
8 |
wp710-b |
|
|
This is the button magazine plug Winchester model 1892, 1873 small cal rifles. If you have a rifle (that has the forearm cap--not the carbine with... |
$28.00
CLICK HERE
for More Info
or to Order
|
0 |
wp711-a |
|
|
This is a magazine plug Winchester 1873, 1894, 1892 .25-.20 and .32-.20 caliber lever action. This plug has NO LIP. This plug fits into the barrel... |
$21.25
CLICK HERE
for More Info
or to Order |
12 |
wp712 |
|
|
This is a magazine plug Winchester 1873 and 1892 .25, .20 and .32, .20 caliber lever action. This plug has the lip which fits into the slot on the... |
$25.25
CLICK HERE
for More Info
or to Order |
17 |
wp716 |
|
|
This magazine plug is slotted and takes the short magazine plug screw. It has a lip and will fit Winchester model 1873, 1894,1892 .44-.38... |
$26.25
CLICK HERE
for More Info
or to Order |
27 |
wp720-a |
|
|
This is the magazine plug small cal magazie tubes. it is the button style short tubes. The forForearm cap holds this peice on. |
$20.25
CLICK HERE
for More Info
or to Order |
1 |
wp720-b |
|
|
This is an magazine plug that will fit the Winchester model 1894. Winchester started using this plug on the 94's around serial number... |
$19.25
CLICK HERE
for More Info
or to Order |
15 |
wp713-b |
|
|
This is the long magazine plug screw Winchester 1886 and model 71. It is longer than the standard mag plug screws used on the other lever actions.... |
$5.75
CLICK HERE
for More Info
or to Order |
52 |
wp64-a |
|
|
This is the screw (long) that goes into the magazine plug on the Winchester 1866, 1873, 1892, 1894 lever action rifles, and model 53. This screw goes... |
$4.25
CLICK HERE
for More Info
or to Order |
329 |
wp714-b |
|
|
This is the magazine plug screw TAKE DOWN model of the Winchester 1894,model 64 and 55. |
$5.25
CLICK HERE
for More Info
or to Order |
12 |
wp713-a |
|
|
This is the magazine plug Winchester model 1886 rifle. This plug has a tapped hole long magazine plug screw (part number 713B) and does NOT have a... |
$22.50
CLICK HERE
for More Info
or to Order
|
0 |
wp714-a |
|
|
This is the magazine plug Winchester model 1886 rifle. This plug has a tapped hole magazine plug screw and has a lip that fits into the under side of... |
$22.50
CLICK HERE
for More Info
or to Order
|
0 |
mt1-wrf |
|
|
This is the complete inner magazine tube specifically 1890 WRF (Winchester rim fire cartridge) model. The tube its self, not including follower or... |
$44.50
CLICK HERE
for More Info
or to Order |
34 |
mt3 |
|
|
This is a NEW Outer magazine tube replacement for S., L., and LR Winchester pump 22 guns. This fits models 1890, 1906, 61,62 , 62A 61. (All... |
$28.50
CLICK HERE
for More Info
or to Order
|
0 |
mt2 |
|
|
Outer magazine tube replacement for S., L., and LR Winchester pump .22 models 1890, 1906, 62, 62A and 61 and 72. The slot is placed farther forward... |
$28.50
CLICK HERE
for More Info
or to Order
|
0 |
mt11 |
|
|
This is the complete inner magazine tube Remington model 12 pump .22 S, L, LR. It fits the Remington model 12 12c with a octagon barrel. The tube is... |
$39.75
CLICK HERE
for More Info
or to Order
|
0 |
mt14 |
|
|
This is a complete inner magazine tube Remington model 12A pump .22 S, L, LR. It fits the Remington model 12A with a round barrel. The tube is... |
$44.75
CLICK HERE
for More Info
or to Order
|
0 |
mt14 rop |
Remington Original Part |
|
This is an ORIGINAL complete inner magazine tube Remington model 12 pump .22 S, L, LR. It fits the Remington model 12 12c with a round barrel. The... |
$48.00
CLICK HERE
for More Info
or to Order
|
0 |
mt13 |
|
|
This is the outer magazine tube Remington model 12 pump .22 S, L, LR. This is rifle that has the round barrel. The tube is 11 3/4 inches long and... |
$28.25
CLICK HERE
for More Info
or to Order |
5 |
mt86 |
|
|
This is the magazine tube Winchester model 1886. It is drilled through on the end for the magazine plug screw. Use magazine spring part number ms86... |
CLICK HERE
for More Info
or to Order |
11 |
s39-a1 |
Stevens Original Part |
|
Mainspring coiled type for the later production Stevens Crackshot rifle. |
$29.00
CLICK HERE
for More Info
or to Order |
1 |
wp745-c |
|
|
This is the mainspring also known as the hammer spring (mainspring) that is UNIQUE to the Winchester 1873 SET TRIGGER (straight grip). These were... |
$41.00
CLICK HERE
for More Info
or to Order |
6 |
wp739 |
|
|
This is the hammer spring (mainspring), also called the mainspring Winchester model 1886. It lacks the hole mainspring screw unlike other models and... |
$34.25
CLICK HERE
for More Info
or to Order
|
0 |
wp653-a |
|
|
This is the hammer spring (mainspring), also called the mainspring Winchester model 1886. The spring is what puts tension on your hammer and is... |
$41.50
CLICK HERE
for More Info
or to Order |
11 |
wp734-b |
|
|
This is the hammer spring (mainspring), also called the mainspring Winchester model 1886 SET TRIGGER. The spring is what puts tension on your hammer... |
$39.00
CLICK HERE
for More Info
or to Order |
2 |
wp734-a |
|
|
This is the hammer spring, also called the mainspring for the Winchester rifle. It fits the Winchester model 1866, 1876 and the 1886 Rifles that... |
$32.50
CLICK HERE
for More Info
or to Order
|
0 |
wp732 |
|
|
hammer spring (mainspring) for 1873, 1892 and 1894 (pre 64) Winchester. This is the spring that puts tension on the hammer. These springs are CNC... |
$32.50
CLICK HERE
for More Info
or to Order
|
0 |
wp636 |
|
|
This is the very hard to find mainspring (hammer spring (mainspring)) rare Winchester 1876 Pistol grip rifle. |
$42.00
CLICK HERE
for More Info
or to Order |
1 |
wp736 |
|
|
This is the mainspring also called the hammer spring (mainspring) Winchester model 1892, 1894 and models 64 and 55, 53 PISTOL GRIP lever action... |
$39.00
CLICK HERE
for More Info
or to Order |
1 |
s85-b |
|
|
Mainspring plunger (seat) bracket fits late 1915 Favorite, Stevens Model 70, Ideal NEW |
$14.00
CLICK HERE
for More Info
or to Order |
1 |
s38-a sop |
|
|
ORIGINAL Mainspring Plunger Sleeve for the later production Stevens Crackshot rifles that have a coiled mainspring. This fits into the coiled... |
$12.25
CLICK HERE
for More Info
or to Order |
46 |
s38-b |
|
|
A NEW Mainspring Plunger for the later production Stevens Crackshot rifles that did not have a leaf mainspring. This fits into the coiled... |
$10.95
CLICK HERE
for More Info
or to Order |
5 |
s117 |
|
|
Mainspring plunger fits the late 1915 Favorite. This is a NEW part |
$28.00
CLICK HERE
for More Info
or to Order
|
0 |
s118-a |
|
|
Mainspring sSCREW for the Stevens Favorite that has mainspring with hole. This part was used in the late 1894 Stevens Favorite rifles... |
$5.95
CLICK HERE
for More Info
or to Order |
1 |
s86-a |
Stevens Original Part |
|
Mainspring Screw Stevens model 70 NEW. This part also was used in the late Stevens Favorite rifles (e.g., Model 1915 Favorites) |
$7.95
CLICK HERE
for More Info
or to Order |
12 |
wp733 |
|
|
This is the mainspring (hammer spring (mainspring)) set trigger (straight grip) version of the Winchester 1892 and 1894, and model 53. Use mainspring... |
$39.25
CLICK HERE
for More Info
or to Order |
1 |
wp743 |
|
|
This is the mainspring (also called the hammer spring (mainspring)) Winchester 1892 and 1894,and model 53 This fits the models that have a set... |
$37.50
CLICK HERE
for More Info
or to Order
|
0 |
s165-a |
|
|
NEW Mainspring Stevens Favorite flat spring with NO screw hole -- for early production 1889 and early 1894 Favorite rifles. This spring has an... |
$39.00
CLICK HERE
for More Info
or to Order
|
0 |
s167 |
|
|
NEW Mainspring Stevens Favorite flat spring with screw hole and raised tip -- for intermediate 1894 production Favorite rifles. See... |
$42.00
CLICK HERE
for More Info
or to Order |
3 |
s169-a |
|
|
Mainspring Stevens Favorite flat spring with screw hole for later 1894 production rifles. This is a NEW part. See the attached pdf diagram... |
$39.00
CLICK HERE
for More Info
or to Order |
2 |
s171-a |
|
|
Mainspring Stevens Favorite -- coil mainspring for later 1915 Fvorite production rifles, and also used in the Model 70 visible loader and Ideal... |
$32.00
CLICK HERE
for More Info
or to Order |
36 |
s11-c |
|
|
Stud for Mainspring without hole on Stevens Favorite 1889 and early 1894 production rifles. This is a NEW part and is for the spring that... |
$32.00
CLICK HERE
for More Info
or to Order |
3 |
wp735 |
|
|
This is the Mainspring (hammer spring (mainspring)) Winchester model 1895. Spring that puts tension on your hammer. The screw that holds it in place... |
$35.25
CLICK HERE
for More Info
or to Order |
59 |
s16-b |
|
|
Screw for the Breech Block on a Stevens Crackshot model 26 . This screw goes across the receiver and holds the breech-block in place. |
$6.49
CLICK HERE
for More Info
or to Order |
15 |
wp187 |
Winchester Original Part |
|
This is an ORIGINAL sear for the Winchester 1894, Model 64 and Model 55 lever action rifles. The sear spring rests on this piece putting tension on... |
$29.00
CLICK HERE
for More Info
or to Order |
21 |
wp29-a |
|
|
This is a NEW sear for the Winchester 1894, model 64 and model 55 lever action rifle. The sear spring rests on this piece putting tension on the... |
$27.50
CLICK HERE
for More Info
or to Order |
2 |
wp25-a |
|
|
This is a new Side plate also called Action Slide Cover for 1890 and 1906 62 or 62A Winchester pump 22 rifles. This plate slides from front to back... |
$23.50
CLICK HERE
for More Info
or to Order
|
0 |
rp6 |
|
|
Assembly screw or takedown screw for Remington model 12 and models 121/25. |
$22.75
CLICK HERE
for More Info
or to Order |
25 |
wp66-a |
|
|
This is the long tang screw (stock bolt) that fits on the Winchester 1890, 1906, 62, 62A pump .22 rifle. This screw is a tad bit longer than the... |
$7.95
CLICK HERE
for More Info
or to Order |
9 |
wp23-b |
|
|
This is the tang screw (stock screw) Winchester 1906 EXPERT and the very rare 1890 pistol grip pump THAT IS USED TO ATTACH A TANG SIGHT. The screw... |
$8.25
CLICK HERE
for More Info
or to Order |
18 |
wp543 |
|
|
This is the tang screw, also called stock screw Winchester 1886 PISTOL GRIP. This screw holds your stock on and is longer to compensate curve on the... |
$6.95
CLICK HERE
for More Info
or to Order |
74 |
wp66-b |
|
|
This is the tang screw (stock screw) Winchester 1890 Special or the 1906 EXPERT pump .22. It is longer than a standard tang screw, and attaches the... |
$6.50
CLICK HERE
for More Info
or to Order |
40 |
s118-b |
|
|
Lower Tang WOOD Screw on a Stevens model 70 , Favorite and other models that have wood screws for tang attachment |
$4.95
CLICK HERE
for More Info
or to Order |
14 |
wp24-a |
|
|
Trigger spring for an 1890 - 1906 and model 62 pump 22 rifle. This spring sits in the lower tang and rest on the trigger. It is held in place by... |
$14.50
CLICK HERE
for More Info
or to Order |
12 |
s14-b |
|
|
Screw that holds the trigger spring in place on a Stevens Favorite. This is a QUALITY NEW part. Also fits the trigger spring on the... |
$4.50
CLICK HERE
for More Info
or to Order |
10 |
wp706-a |
|
|
This is a NEW flat trigger spring Winchester model 1892, also model 53 and 65. This spring sits inside the lower tang and puts tension on... |
$19.00
CLICK HERE
for More Info
or to Order
|
0 |
wp651 |
|
|
This is new flat trigger spring Winchester model 1886. This spring sits inside the lower tang and puts tension on the trigger. It is held... |
$22.50
CLICK HERE
for More Info
or to Order |
7 |
s14-c |
Stevens Original Part |
|
NEW Long leaf Trigger Spring for a Stevens Favorite 1889, 1894 and 1915, also fits the Model 70 Visible Loader and Ideal rifles. |
$25.25
CLICK HERE
for More Info
or to Order |
3 |
