Item Id |
Origin |
Product Image |
Item Name |
Price |
Quantity+ |
st117-a wop |
Winchester Original Part |
|
This is the hard-to-find ORIGINAL elevator rear sporting rifle sight on early production Winchester lever action rifles (Predominantly Winchester... |
$56.00 CLICK HERE for More Info or to Order |
6 |
p115-b |
|
|
This is the pin that holds the firing pin into the bolt. Type 2 breechbolts used after serial number 110,000 to end of production utilize this... |
$6.00 CLICK HERE for More Info or to Order |
8 |
mt-Large |
|
|
This is the LARGE CALIBER magazine tube for Winchester lever action rifle and carbine in models 1866, 1873, 1892, 1894 (pre and post 64), in... |
CLICK HERE for More Info or to Order |
8 |
wp550 |
|
|
This is the ejector spring Winchester 1886 lever action rifle. It fits over the neck of the ejector and was held in place by the ejector collar. |
$8.75 CLICK HERE for More Info or to Order |
9 |
mt86-xl |
|
|
This is the magazine tube Winchester model 1886 rifle that has a special order barrel longer than 26 inches. It is drilled through for the... |
$115.00 CLICK HERE for More Info or to Order |
9 |
wp400 wop |
Winchester Original Part |
|
Winchester 1 inch Rear sling swivel stud. For Models 70 pre 64, Model 100 and 770 This is a Winchester original Part Fits 1... |
$25.00 CLICK HERE for More Info or to Order |
9 |
wp651 |
|
|
This is new flat trigger spring Winchester model 1886. This spring sits inside the lower tang and puts tension on the trigger. It is held... |
$22.50 CLICK HERE for More Info or to Order |
9 |
mt86 |
|
|
This is the magazine tube Winchester model 1886. It is drilled through on the end for the magazine plug screw. Use magazine spring part number ms86... |
CLICK HERE for More Info or to Order |
10 |
p172 |
|
|
This is the PIN for the trigger on a Winchester 1886 lever action rifle. The pin holds the trigger into the tang on the 1886 rifle and carbine. |
$6.50 CLICK HERE for More Info or to Order |
10 |
wp653-a |
|
|
This is the hammer spring (mainspring), also called the mainspring Winchester model 1886. The spring is what puts tension on your hammer and is... |
$41.50 CLICK HERE for More Info or to Order |
11 |
set1886-r |
|
|
This discounted set consists of all of the external screws on the Winchester 1886 lever-action RIFLE (if you have 2 barrel bands that hold on forearm... |
$32.50 CLICK HERE for More Info or to Order |
13 |
mt-86 |
Winchester Original Part |
|
This is magazine tube Winchester model 1886 rifle WITH A 26" BARREL. It is drilled through on the end for the magazine plug screw. ... |
$49.00 CLICK HERE for More Info or to Order |
15 |
wp64-b |
|
|
This is the screw (short) that goes into the magazine plug on the Winchester 1873/1892/1894/1886/ 1866 and model 53 lever action rifles. If you have... |
$3.85 CLICK HERE for More Info or to Order |
16 |
wp231 wop |
Winchester Original Part |
|
These are ORIGINAL large style slot head buttplate screws for regular black hardened plastic, crescent style and carbine style metal buttplates on... |
$8.25 CLICK HERE for More Info or to Order |
18 |
wp595 |
|
|
This is the wood swivel stud that screws into forearm on rifles to attach sling to. |
$4.50 CLICK HERE for More Info or to Order |
18 |
wp71-n |
|
|
This is the tang screw Winchester 1886. It is longer than the normal tang screw and made to hold on the Lyman tang site along with attaching the... |
$10.00 CLICK HERE for More Info or to Order |
18 |
set1886-r |
|
|
This discounted set consists of all of the external screws on the Winchester 1886 lever-action RIFLE (if you have 2 barrel bands that hold on forearm... |
$32.50 CLICK HERE for More Info or to Order |
21 |
wp721-a |
|
|
This is the older MACHINED style magazine follower Winchester model 1886 and model 71 lever action rifle. The magazine spring fits into the... |
$21.50 CLICK HERE for More Info or to Order |
22 |
wp727-b |
|
|
This is the magazine ring (also called mag hanger) Winchester model 1886 lever action TAKE DOWN model. This ring is unique to the 1886 and has a... |
$34.50 CLICK HERE for More Info or to Order |
22 |
wp64-b1 |
|
|
This is the screw that attaches the Spring brass trap door on the buttplate of the Winchester 1866, 1876 and 1873 lever action rifles. The... |
$4.50 CLICK HERE for More Info or to Order |
25 |
wp548 wop |
|
|
This is an ORIGINAL front barrel band screw Winchester 1886 lever action carbine. This is the screw that goes through the band that holds... |
$11.75 CLICK HERE for More Info or to Order |
27 |
wp727-a |
|
|
This is the magazine ring (also called mag hanger) Winchester model 1886 lever action rifle. This ring is unique to the 1886 solid frame and has a... |
$34.50 CLICK HERE for More Info or to Order |
30 |
wp71-p |
|
|
This is the tang screw that mounts the Lyman tang sight on the Winchester model 1886 WITH A PISTOL GRIP STOCK. It is longer than the normal tang... |
$10.00 CLICK HERE for More Info or to Order |
32 |
wp107 |
|
|
This is the hammer screw Winchester 1886 lever action rifle. This screw attaches the hammer to the receiver. |
$4.49 CLICK HERE for More Info or to Order |
34 |
wp727-a pin |
|
|
This is the pin that holds the hanger on the Winchester model 1886 lever action rifle. |
$3.10 CLICK HERE for More Info or to Order |
35 |
wp68 |
|
|
This is the screw that adjusts the tension on the hammer spring (mainspring) It is located in the middle of the lower tang. If your mainspring is... |
$3.00 CLICK HERE for More Info or to Order |
35 |
wp349-a |
|
|
These are NEW BUTTPLATE SCREWS for THE 1903 AND 63 Winchester metal buttplate. These screws are shorter screw so they will not split the... |
$6.25 CLICK HERE for More Info or to Order |
37 |
wp106 |
|
|
This is the carrier Spring screw Winchester lever action model 1886 rifle. This screw hold on the carrier spring on the underside of the upper tang.... |
$4.25 CLICK HERE for More Info or to Order |
39 |
wp105 |
|
|
This is the screw used to hold the Loading gate (spring cover) on the Winchester 1886 and the Winchester model 71. This is also called... |
$5.75 CLICK HERE for More Info or to Order |
40 |
wp4-a |
|
|
The complete saddle ring and stud fit (screw) directly into the left receiver side of any (pre 64) 1894, 1886, 1873 Winchester saddle ring carbine.... |
$32.00 CLICK HERE for More Info or to Order |
48 |
ms86 |
|
|
This is the magazine spring Winchester 1886 lever action rifle. It is identicle to the 1876 spring and the same for all of the calibers. rifle the... |
$8.75 CLICK HERE for More Info or to Order |
49 |
wp713-b |
|
|
This is the long magazine plug screw Winchester 1886 and model 71. It is longer than the standard mag plug screws used on the other lever actions.... |
$5.75 CLICK HERE for More Info or to Order |
51 |
wp6 |
|
|
This saddle ring stud, screws directly into the left receiver side in any 1876, 1894, 1895, & 1886 saddle ring carbine. It can also be used on... |
$21.25 CLICK HERE for More Info or to Order |
51 |
set1886-c |
|
|
This discounted set consists of all of the external screws on the Winchester 1886 and lever action CARBINE (if you have a Forearm cap that uses 2... |
$38.75 CLICK HERE for More Info or to Order |
53 |
wp5 |
|
|
This saddle ring fits into the saddle ring stud or the U-shaped staple on the side of the model 1866, 1876, 1873, 1892, 1894 and 1895 Winchester... |
$12.00 CLICK HERE for More Info or to Order |
56 |
ms73 |
|
|
This is a NEW magazine spring for the Winchester 1866/1873/1894/ 1892 rifle. It fits the .38 and .44 cal in the 1873 and 1892 models. This... |
$10.75 CLICK HERE for More Info or to Order |
60 |
wp108 |
|
|
this is the cartridge guide screw Winchester 1886 lever action rifle. Will also fit the model 71 This screw holds on the cartridge guide on to the... |
$3.00 CLICK HERE for More Info or to Order |
67 |
wp726 pin |
|
|
This pin goes through the base of the Magazine Hanger (magazine ring) (part number 726) and holds the outer magazine tube from sliding out. This part... |
$3.65 CLICK HERE for More Info or to Order |
67 |
wp543 |
|
|
This is the tang screw, also called stock screw Winchester 1886 PISTOL GRIP. This screw holds your stock on and is longer to compensate curve on the... |
$6.95 CLICK HERE for More Info or to Order |
74 |
manual-1886 |
|
|
About 1886 Winchester Rifles (REVISED EDITION) The 1886 Winchester was a successor to the 1873 Winchester rifle, and had one of the strongest... |
CLICK HERE for More Info or to Order |
77 |
wp626-a |
|
|
NEWLY ARRIVED! This is the wood screw lower tang on the Winchester 1866, 1873, 1876, 1886 and model 1885 rifle. It is located at the very back of the... |
$6.25 CLICK HERE for More Info or to Order |
186 |
wp54-b |
|
|
This is the XTRA LONG screw that attaches the forForearm cap to the forForearm cap tenon. NOTE: There are few instances where longer forForearm cap... |
$5.25 CLICK HERE for More Info or to Order |
207 |
wp520 |
|
|
Tang Screw custom made extra LONG so it can be fit to any number of Winchester Lever Action rifles. It retains all... |
$8.25 CLICK HERE for More Info or to Order |
344 |
wp50 |
|
|
This is the trigger spring SCREW (Sear spring) - that fits the Winchester 1866, 1873, 1886, 1894, 1892, models 53, and 65. Also the 1890 1906 62 and... |
$3.85 CLICK HERE for More Info or to Order |
366 |
wp65 |
|
|
This is the upper tang screw (also called stock screw) Winchester 1876. 1886. This screw holds the stock on regular/ straight grip stocks. If you... |
$5.75 CLICK HERE for More Info or to Order |
441 |
wp64-a |
|
|
This is the screw (long) that goes into the magazine plug on the Winchester 1866, 1873, 1892, 1894 lever action rifles, and model 53. This screw goes... |
$4.25 CLICK HERE for More Info or to Order |
564 |
wp57 |
|
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.95 CLICK HERE for More Info or to Order |
729 |