Winchester 1906

The Winchester Model 1906 was designed as a more inexpensive companion to the popular Model 1890, the main differences being the 1906's flat shotgun-style butt plate and rounded barrel, as opposed to the 1890s crescent butt plate and octagon barrel. When the Model 1906 first became available, it was chambered exclusively for the .22 Short cartridge, however this was modified after serial number 113,000 (in the second year of production, 1908) when it was made to cycle .22 Long and .22 Long Rifle interchangeably in order to ensure the rifle's continued popularity There were three different variants produced by Winchester; the .22 Short Model, the Standard Model, and the Expert Model.  Although production ended officially in 1932, a small number of Model 1906 rifles were built out of spare parts left in the factory until 1936. The last known serial number is 847,997.



Item Id Origin Product Image Item Name Price- Quantity
p107
Cartridge Stop Pin 1906, 62 or 62A

Cartridge Stop Pin 1906, 62 or 62A

This is the pin that holds the cartridge stop (wp3A) in the carrier of the Winchester 1906 and 62 or 62A. If you have a carrier that only holds the...
$3.75

CLICK HERE

for More Info
or to Order
5
wp45
Sight - Rear elevator screw Winchester 1890 and 1906

Sight - Rear elevator screw Winchester 1890 and 1906

This small screw raises and lowers the original rear sight 30-B on the 1890 and 1906 Winchester pump 22. It screws in just in front of the V-notch on...
$3.75

CLICK HERE

for More Info
or to Order
35
wp71-i
Tang sight screw front vintage Lyman and Marbles tang sight Winchester 1873 1890 - 1906 62 1892 1894, and model 53

Tang sight screw front vintage Lyman and Marbles tang sight Winchester 1873 1890 - 1906 62 1892 1894, and model 53

This is the screw that holds on the front of the Lyman and Marbles tang sight. It goes into the front hole (where the stock screw goes into the rear...
$3.75

CLICK HERE

for More Info
or to Order
108
wp47
Mainspring screw Winchester 1906, 62,1894, 1892,and model 53

Mainspring screw Winchester 1906, 62,1894, 1892,and model 53

This screw holds the main spring (hammer spring (mainspring)) in place. The screw goes through the lower tang and is attached to the anterior portion...
$3.65

CLICK HERE

for More Info
or to Order
68
wp199-b wop
Magazine Hanger PIN Winchester 1890 or 1906 - 62 - 61 -72 ORIGINAL

Magazine Hanger PIN Winchester 1890 or 1906 - 62 - 61 -72 ORIGINAL

This is AN ORIGINAL magazine hanger pin - this pin holds the outer magazine tube tight against the rear Magazine Hanger (magazine ring). It slides...
$3.56

CLICK HERE

for More Info
or to Order
1
wp22-a
Escutcheon 1890 and 1906 Winchester pump handles

Escutcheon 1890 and 1906 Winchester pump handles

Escutcheon for 1890 and 1906 Winchester pump handle. This part is blued metal. This will fit directly into the forearm and will keep the pump handle...
$3.55

CLICK HERE

for More Info
or to Order
50
p111
Extractor pin Winchester 1890, 1906, 62 or 62A

Extractor pin Winchester 1890, 1906, 62 or 62A

This extractor pin is used on the Winchester models 1890, 1906, 62 and 62A. It goes in to0 the top of the bolt on the right side and down...
$3.50

CLICK HERE

for More Info
or to Order
36
wp244-aa wop
Winchester Original Part
Extractor pin Winchester 1890, 1906, 62 or 62A ORIGINAL

Extractor pin Winchester 1890, 1906, 62 or 62A ORIGINAL

This is an ORIGINAL pin that fits into the bolt holding the extractor in on the 1890, 1906 62 62A Winchester pump .22
$3.25

CLICK HERE

for More Info
or to Order
55
p104
Hammer stirrup PIN Winchester 1890, 1906 62

Hammer stirrup PIN Winchester 1890, 1906 62

This is the pin that holds the stirrup onto the hammer. The stirrup is what the mainspring (or hammer spring (mainspring)) attaches to putting...
$3.25

CLICK HERE

for More Info
or to Order
31
wp69
Buttplate screw Winchester 1906, Remington .22, Marlin, Stevens (SINGLE screw) flat head NEW

Buttplate screw Winchester 1906, Remington .22, Marlin, Stevens (SINGLE screw) flat head NEW

Buttplate screw Winchester 1906, along with the Remington .22 rifles, Marlin and Stevens 22 rifles. These screws are one inch long with the FLAT...
$3.20

CLICK HERE

for More Info
or to Order

  
0
wp185-a wop
Winchester Original Part
Trigger spring and safety bar spring SCREW 1890 1906 62/62A 1866 1873 1886 1892 1894 ORIGINAL

Trigger spring and safety bar spring SCREW 1890 1906 62/62A 1866 1873 1886 1892 1894 ORIGINAL

This is an ORIGINAL trigger spring screw (Sear spring) - that fits the Winchester 1866, 1873, 1886, 1894, 1892, models 53, and 65. Also the 1890 1906...
$2.75

CLICK HERE

for More Info
or to Order
29
p110
Assembly (Take Down )screw PIN for the Winchester 1890 1903 1906 62 62A

Assembly (Take Down )screw PIN for the Winchester 1890 1903 1906 62 62A

This is the tiny little pin that goes into the end of the assembly screw (take down screw) on the Winchester 1890 - 1906, mod  62 and also fits...
$2.55

CLICK HERE

for More Info
or to Order
31
info1890
.Parts Diagram - Winchester 1890

.Parts Diagram - Winchester 1890

This useful diagram outlines all of the parts of a Winchester 1890 with their names. It will be invaluable if you want to do any work on your...
$2.25

CLICK HERE

for More Info
or to Order

  
0
wp723 pin
Magazine Hanger (magazine ring) PIN Winchester 1890 or 1906 - 62 - 61 -72

Magazine Hanger (magazine ring) PIN Winchester 1890 or 1906 - 62 - 61 -72

This is the pin the holds the magazine tight against the rear Magazine Hanger (magazine ring). It slides into a hole in the base of the rear mag...
$2.25

CLICK HERE

for More Info
or to Order
317
manuals-1890 06
A Disassembly Manual for the Winchester 1890 and 1906 pump .22 rifles

A Disassembly Manual for the Winchester 1890 and 1906 pump .22 rifles

This spiral-bound manual contains instructions on how to successfully take down your 1890 Winchester pump .22 rifle. All 1890 and 1906 rifles are...

CLICK HERE

for More Info
or to Order
46

Copyright © 2024 Homestead Parts. Parts for Antique Firearms of the Old West: Winchester and Remington
repair gunsmith restore