Item Id |
Origin |
Product Image |
Item Name- |
Price |
Quantity |
wp502-a early wop |
Winchester Original Part |
|
This is an ORIGINAL 1894 magazine plug, that is slotted and takes the earlier short magazine plug screw. It has NO LIP and will fit Winchester... |
$76.00 CLICK HERE for More Info or to Order |
2 |
wp196-c later wop |
Winchester Original Part |
|
This is an ORIGINAL 1894 magazine plug, that does not have a lip and takes the long magazine plug screw. It has NO LIP and will fit Winchester model... |
$49.00 CLICK HERE for More Info or to Order |
1 |
wp536-b |
|
|
This is the magazine plug Winchester 1873 and 1892 small cal rifles (.25 and .32) that have the 1/2 and 3/4 length magazine tube. This plug HAS a lip... |
$28.50 CLICK HERE for More Info or to Order
|
0 |
wp719-b |
|
|
This is the magazine plug Winchester 1873 1892 and 1894 .38 and .44 cal rifles that have the 1/2 AND 3/4 inch length magazine tube. This plug HAS a... |
$29.75 CLICK HERE for More Info or to Order |
2 |
wp718-b |
|
|
This is the magazine plug Winchester 1873 and 1892 small cal rifles (.25 and .32) that have the 1/2 and 3/4 length magazine tube. This plug has NO... |
$28.50 CLICK HERE for More Info or to Order
|
0 |
wp719-a |
|
|
This is the magazine plug Winchester 1873 1892 and 1894 .38 and .44 cal rifles that have the 1/2 and 3/4 length magazine tube. This plug has NO LIP... |
$29.50 CLICK HERE for More Info or to Order
|
0 |
wp710-b |
|
|
This is the button magazine plug Winchester model 1892, 1873 small cal rifles. If you have a rifle (that has the forearm cap--not the carbine with... |
$28.00 CLICK HERE for More Info or to Order
|
0 |
wp710-a |
|
|
This is the button magazine plug Winchester model 1894, 1892, 1873 large cal rifles. If you have a rifle (that has the forearm cap--not the carbine... |
$29.25 CLICK HERE for More Info or to Order
|
0 |
wp726 |
|
|
This magazine ring (mag hanger) will fit Winchester 1894 (all calibers) It will also fit the 1866 (after 16,000) and 1873 in .38 and .44 cal. Also... |
$38.50 CLICK HERE for More Info or to Order
|
0 |
wp726 pin |
|
|
This pin goes through the base of the Magazine Hanger (magazine ring) (part number 726) and holds the outer magazine tube from sliding out. This part... |
$3.65 CLICK HERE for More Info or to Order |
67 |
wp172-a wop |
Winchester Original Part |
|
Magazine Hanger (magazine ring) ORIGINAL for 32-20 Winchester 1873. The pin that goes through this hanger is part wp726 pin. |
$36.00 CLICK HERE for More Info or to Order
|
0 |
wp206-b wop |
Winchester Original Part |
|
This an ORIGINAL hanger that attaches to the underside of the barrel on the Winchester 1873 and 1892 rifle (or carbine) in larger calibers. This... |
$58.00 CLICK HERE for More Info or to Order
|
0 |
wp204 wop |
Winchester Original Part |
|
This an ORIGINAL hanger that attaches to the underside of the barrel on the Winchester 1873 and 1892 rifle (or carbine) in 25-20 or 32-20 cal. This... |
$63.00 CLICK HERE for More Info or to Order
|
0 |
wp728 |
|
|
This is the hanger that attaches to the underside of the barrel on the Winchester 1873 and 1892 rifle or carbine in 25-20 or 32-20 cal. This will not... |
$32.50 CLICK HERE for More Info or to Order |
5 |
wp170-b wop |
Winchester Original Part |
|
Follower ORIGINAL for 32-20 Winchester 1873. This is an ORIGINAL Winchester part that fits inside the magazine tube. These... |
$56.00 CLICK HERE for More Info or to Order
|
0 |
wp170-a wop |
Winchester Original Part |
|
Follower ORIGINAL for 38&44-40 Winchester 1873 |
$56.00 CLICK HERE for More Info or to Order
|
0 |
wp711-b |
|
|
This is the magazine follower for all models of the the 32/20 Winchester 1873.This part sits toward the receiver Forearm of the magazine tube and... |
$22.75 CLICK HERE for More Info or to Order
|
0 |
wp717-a |
|
|
This is a NEW magazine follower for 38/40 and 44/40 caliber Winchester 1866 and also fits 1873. This is the second type of follower 1866... |
$23.75 CLICK HERE for More Info or to Order |
27 |
wp589-b wop |
Winchester Original Part |
|
This is an ORIGINAL Loading gate (spring cover) 2nd and 3rd model Winchester 1873. The bluing varies being that these are ORIGINAL parts |
$98.25 CLICK HERE for More Info or to Order
|
0 |
wp795 |
|
|
This is a reproduction Loading gate (spring cover) Winchester 1873. This is 2nd and 3rd model 73s. (the first model Loading gate (spring cover) has a... |
$68.00 CLICK HERE for More Info or to Order
|
0 |
wp589-a wop |
Winchester Original Part |
|
This is an ORIGINAL Screw Loading gate (spring cover) on the 2nd and 3rd model Winchester 1873. The bluing varies being that these are ORIGINAL parts. |
$9.95 CLICK HERE for More Info or to Order
|
0 |
wp762 |
|
|
This is the Loading gate screw also called spring cover screw Winchester 1873. This unique screw has an OVAL head and is designed to fit rifles with... |
$6.00 CLICK HERE for More Info or to Order |
33 |
wp71-f |
|
|
Spring cover screw Winchester 1892 , 1894 , 1873 lever action. It also fits Winchester model 65, 66, 55, 53,1876 and model 53. This screw... |
$3.75 CLICK HERE for More Info or to Order |
368 |
wp80-a wop |
Winchester Original Part |
|
This is a ORIGINAL hammer That fits on the Winchester model 1866 and the 1873 lever action rifles. These are NOT reproductions so the finish... |
$90.25 CLICK HERE for More Info or to Order |
2 |
wp167-b wop |
Winchester Original Part |
|
This is a ORIGINAL hammer comlete that fits on the Winchester model 1866 and the 1873 lever action rifles. These are NOT reproductions so the finish... |
$129.25 CLICK HERE for More Info or to Order |
1 |
wp261-a wop |
Winchester Original Part |
|
This is the hammer stirrup Winchester 1866 1873 1876 1886 lever-action rifles and the 1897 and 1893 shotgun. This part attaches to the... |
$12.95 CLICK HERE for More Info or to Order
|
0 |
p148 |
|
|
This is the pin that holds the stirrup (part number 513) onto the hammer Winchester 1873 1892 1894 lever action rifles. |
$4.50 CLICK HERE for More Info or to Order |
2 |
wp261-b wop |
Winchester Original Part |
|
This is the Hammer Stirrup PIN Winchester for the Winchester 1866 1873 1876 1886 1892 and 1894 lever-action rifle. |
$3.50 CLICK HERE for More Info or to Order |
1 |
wp621-a |
|
|
This is the screw that holds the hammer spring (also called mainspring) in place on the Winchester 1873 AND 1866 lever action rifle. |
$5.25 CLICK HERE for More Info or to Order |
51 |
wp701-a |
|
|
This is a hammer Winchester 1873 set trigger model. The stirrup rides on the outside of the hammer. |
$92.00 CLICK HERE for More Info or to Order
|
0 |
wp786 |
|
|
The hammer screw holds the hammer in place on the very early model 1873 rifles (up to ~ 89,000 serial number). This screw goes through the frame and... |
$5.75 CLICK HERE for More Info or to Order |
161 |
p124 |
|
|
This is the pin that holds the hammer in place on the Winchester model 1873 |
$4.05 CLICK HERE for More Info or to Order |
47 |
wp167-a wop |
Winchester Original Part |
|
This is an ORIGINAL Hammer PIN Winchester 1873. If you prefer to have a new PIN please see part number p124. Note: after approximately serial number... |
$9.50 CLICK HERE for More Info or to Order |
3 |
frm76E-ros wop |
Winchester Original Part |
|
This is A high quality ORIGINAL forearm for the Winchester 1876 rifle. If fits rifles with the OCTAGON barrel . Excellent... |
$147.50 CLICK HERE for More Info or to Order |
1 |
frm73-rrs G wop |
|
|
This is A GOOD quality ORIGINAL forearm for the Winchester 1873 rifle. If fits rifles with a Round barrel in Small... |
$109.50 CLICK HERE for More Info or to Order
|
0 |
frm73-rrs E wop |
|
|
This is A high quality ORIGINAL forearm for the Winchester 1873 rifle. If fits rifles with a Round barrel in Small... |
$125.50 CLICK HERE for More Info or to Order
|
0 |
frm73-rrl G wop |
Winchester Original Part |
|
This is an ORIGINAL forearm for the Winchester 1873 rifle. It will fit all large-caliber rifles with a ROUND barrel in (.38... |
$109.50 CLICK HERE for More Info or to Order
|
0 |
frm73-rrl E wop |
Winchester Original Part |
|
This is an ORIGINAL forearm for the Winchester 1873 rifle. It will fit all large-caliber rifles with a ROUND barrel in (.38... |
$129.50 CLICK HERE for More Info or to Order
|
0 |
frm73-ros repaired wop |
Winchester Original Part |
|
This is an ORIGINAL forearm from a Winchester 1873 rifle that has been repaired. It will fit all small-caliber rifles with... |
$87.50 CLICK HERE for More Info or to Order
|
0 |
frm73-rrl repaired wop |
Winchester Original Part |
|
This is an ORIGINAL forearm from a Winchester 1873 rifle that has been repaired. It will fit all large-caliber rifles with... |
$87.50 CLICK HERE for More Info or to Order
|
0 |
frm73-rrorol repaired wop |
Winchester Original Part |
|
This is an ORIGINAL forearm from a Winchester 1873 rifle that has been repaired. It will fit all large-caliber rifles with... |
$87.50 CLICK HERE for More Info or to Order
|
0 |
frm73-ros G wop |
Winchester Original Part |
|
This is GOOD quality ORIGINAL forearm for the Winchester 1873 rifle. If fits rifles with the OCTAGON barrel in Small calibers (.32-20,.32... |
$115.50 CLICK HERE for More Info or to Order
|
0 |
frm73-ros E wop |
Winchester Original Part |
|
This is A high quality ORIGINAL forearm for the Winchester 1873 rifle. If fits rifles with the OCTAGON barrel in Small calibers... |
$135.50 CLICK HERE for More Info or to Order
|
0 |
frm73-rol G wop |
Winchester Original Part |
|
This is an ORIGINAL forearm for the Winchester 1873 rifle. It will fit all large-caliber rifles with an OCTAGON barrel in ... |
$119.50 CLICK HERE for More Info or to Order
|
0 |
frm73-rol E wop |
Winchester Original Part |
|
This is an ORIGINAL forearm for the Winchester 1873 rifle. It will fit all large-caliber rifles with an OCTAGON barrel in ... |
$139.50 CLICK HERE for More Info or to Order
|
0 |
frm73-rrs |
|
|
This is the high quality NEW black walnut forearm Winchester 1873 and 1866 RIFLE (not carbine). If fits rifles with the ROUND barrel in... |
$93.50 CLICK HERE for More Info or to Order |
9 |
frm73-rrl |
|
|
This is the high quality NEW black walnut forearm Winchester 1873 and 1866 RIFLE (not carbine). If fits rifles with the ROUND barrel in Large... |
$96.50 CLICK HERE for More Info or to Order |
12 |
frm73-rol |
|
|
This is the high quality black walnut forearm Winchester 1873 and 1866 RIFLE. If fits rifles with the OCTAGON barrel in Large calibers (.44-40,.44... |
$93.50 CLICK HERE for More Info or to Order |
10 |
frm73-cs |
|
|
This is a high quality black walnut replacement forearm with marbling for the Winchester 1873 and 1866 CARBINE round barrel SMALL CAL (32 WCF). This... |
$96.50 CLICK HERE for More Info or to Order |
6 |
frm73-cl |
|
|
This is a high quality black walnut replacement forearm Winchester 1873 and 1866 CARBINE LARGE CAL (38-44) Round barrel rifle. This is held on by the... |
$94.50 CLICK HERE for More Info or to Order |
1 |
frm73-ros |
|
|
This is the high quality black walnut forearm Winchester 1873. If fits rifles with the OCTAGON barrel in Small calibers (.32-20,.32 WCF). 98 percent... |
$89.50 CLICK HERE for More Info or to Order |
2 |
wp56 |
|
|
This is the screw that attaches the forForearm cap (which holds your wooden forForearm/ foregrip onto the rifle) to the forForearm cap tenon. There... |
$3.75 CLICK HERE for More Info or to Order |
9 |
wp54-b |
|
|
This is the XTRA LONG screw that attaches the forForearm cap to the forForearm cap tenon. NOTE: There are few instances where longer forForearm cap... |
$5.25 CLICK HERE for More Info or to Order |
213 |
wp151-a wop |
Winchester Original Part |
|
This is an ORIGINAL forarm tip (cap) Winchester 1873 lever action rifle. It fits the SMALL calibers in .32 WCF. This part is for a Sporting rifle... |
$96.00 CLICK HERE for More Info or to Order
|
0 |
wp166-b wop |
Winchester Original Part |
|
This is an ORIGINAL forarm tip (cap) Winchester 1873 lever action rifle. It fits the large calibers in .38 & .44 WCF. This part is for a Sporting... |
$105.00 CLICK HERE for More Info or to Order
|
0 |
wp166-a wop |
Winchester Original Part |
|
This is an ORIGINAL forearm tip (cap) Winchester 1873 lever action rifle. It fits the LARGE caliber .. This part is For a ROUNBD barrel. |
$109.00 CLICK HERE for More Info or to Order
|
0 |
wp259 wop |
Winchester Original Part |
|
This is an ORIGINAL firing pin for the 2nd and 3rd model Winchester 1873 lever-action rifles in the .44-40 or .38-40 caliber. If you have a 1st... |
$76.00 CLICK HERE for More Info or to Order
|
0 |
wp747 |
|
|
This is a NEW firing pin 2nd and 3rd model Winchester 1873 .44 and .38 caliber lever action rifle. If you have a 1st model you need part number 748... |
$43.25 CLICK HERE for More Info or to Order
|
0 |
wp156 wop |
Winchester Original Part |
|
Firing Pin Winchester 1873 32-20 cal ORIGINAL |
$76.00 CLICK HERE for More Info or to Order
|
0 |
wp292 wop |
|
|
This is the hard to find ORIGINAL firing pin for the FIRST model Winchester 1873 .44 and .38 caliber lever action rifle. First... |
$74.25 CLICK HERE for More Info or to Order
|
0 |
wp748 |
|
|
This is the hard to find firing pin FIRST model Winchester 1873 .44 and .38 caliber lever action rifle. First model 1873 rifles used a unique firing... |
$42.25 CLICK HERE for More Info or to Order
|
0 |
wp746 |
|
|
This is the firing pin Winchester 1873 .32-20 caliber lever action rifle. These are new firing pins. |
$38.75 CLICK HERE for More Info or to Order
|
0 |
wp157-a wop |
Winchester Original Part |
|
This is an ORIGINAL firing pin retractor Winchester 1873 lever action rifle. This little part goes into the breech bolt on the lower left bottom side... |
$36.00 CLICK HERE for More Info or to Order
|
0 |
wp615-a |
|
|
This is the hard to find firing pin retractor Winchester 1873 lever action rifle. This litle part goes into the breechbolt on the lower left bottom... |
$28.25 CLICK HERE for More Info or to Order |
43 |
p121 |
|
|
This is the pin that holds the Winchester 1873 .22 cal firing pin, or piston to the breech bolt. The firing pin set up was different on the .22 cals... |
$4.15 CLICK HERE for More Info or to Order |
23 |
wp643 |
|
|
This is the breech pin base extension also called the firing pin Winchester 1873 .22 caliber rifle. The breech bolt and firing pin is different... |
$25.25 CLICK HERE for More Info or to Order
|
0 |
H102 wop |
Winchester Original Part |
|
This is an ORIGINAL finger lever from a Winchester 1873 Rifle or carbine. These are for guns that are after serial number 28,000 and have the spur... |
$187.50 CLICK HERE for More Info or to Order |
6 |
wp175-a |
Winchester Original Part |
|
This ORIGINAL PART is the pin that holds the finger lever into the receiver of the Winchester 1873 rifles. This pin goes through the receiver and... |
$9.95 CLICK HERE for More Info or to Order
|
0 |
p125 |
|
|
This is the pin that holds the finger lever into the receiver of the Winchester 1873 rifles. This pin goes through the receiver and finger lever and... |
$3.50 CLICK HERE for More Info or to Order |
3 |
wp179 wop |
Winchester Original Part |
|
This finger lever spring that attaches to the inside on the left side of the receiver.(the side without the Loading gate (spring cover)) This ... |
$73.00 CLICK HERE for More Info or to Order
|
0 |
wp604-a |
|
|
This screw secures the finger lever spring and the carrier lever spring to the bottom of the receiver behind the brass carrier Winchester model 1866,... |
$4.00 CLICK HERE for More Info or to Order |
230 |
wp624-a |
|
|
This finger lever spring attaches inside on the left of the receiver.(the side with out the Loading gate (spring cover)) This replacement spring... |
$38.50 CLICK HERE for More Info or to Order
|
0 |
wp168-c wop |
Winchester Original Part |
|
This is an ORIGINAL finger lever latch (also called the finger lever catch) Winchester 1873 2nd and 3rd model. It fits all 1876 model... |
$56.00 CLICK HERE for More Info or to Order
|
0 |
wp625-b |
|
|
This is the finger lever latch (also called the finger lever catch) Winchester 1873 2nd and 3rd model. It fits all 1876 model rifles. This part is... |
$25.50 CLICK HERE for More Info or to Order
|
0 |
wp784 |
|
|
This is the finger lever latch with a small head early Winchester 1873, before serial number 28,000. This was also the latch used on the model 1866.... |
$16.75 CLICK HERE for More Info or to Order
|
0 |
wp624-b |
|
|
Spring that maintains tension on the finger lever latch on the Winchester 1873 3rd model. On the 1876 This spring was used after serial number 400.... |
$10.25 CLICK HERE for More Info or to Order
|
0 |
p120 |
|
|
This pin sits in the goove on the finger lever latch spring and holds the finger lever latch on to the receiver Winchester 1873 3rd model. And on... |
$4.50 CLICK HERE for More Info or to Order |
65 |
wp168-a wop |
Winchester Original Part |
|
Finger Lever catch pin ORIGINAL for the Winchester 1873. This small pointed pin inserts through the finger-lever latch post and holds the... |
$6.40 CLICK HERE for More Info or to Order |
1 |
wp785 |
|
|
This is the finger lever latch with a LARGE head for the early Winchester 1873. Before serial number 28,000. This latch is on the lower tang and... |
$17.25 CLICK HERE for More Info or to Order
|
0 |
wp168-b wop |
Winchester Original Part |
|
Finger Lever catch spring ORIGINAL for all Winchester 1873 guns. |
$32.00 CLICK HERE for More Info or to Order
|
0 |
wp607-b |
|
|
This is the finger lever cam Winchester 1873 rifle. This little part fits into your finger lever and is what the finger lever spring rides on. It... |
$36.25 CLICK HERE for More Info or to Order
|
0 |
wp603-a |
|
|
This is the screw that holds on the finger lever on the Winchester 1873 rifle. It goes through the left side of the receiver below the sideplate and... |
$5.25 CLICK HERE for More Info or to Order |
82 |
p119 |
|
|
This is the extractor pin Winchester 1873 large .38 and .44 cal extractor. |
$3.50 CLICK HERE for More Info or to Order |
7 |
p118 |
|
|
This is the pin that holds the .32 cal extractor onto the top of the breech bolt on the Winchester .32 cal 1873 Rifles. |
$3.50 CLICK HERE for More Info or to Order |
8 |
p117 |
|
|
This is the pin that holds the .22 cal extractor onto the top of the breech bolt on the Winchester .22 cal 1873 Rifle. |
$3.50 CLICK HERE for More Info or to Order |
16 |
wp236 wop |
Winchester Original Part |
|
This is an ORIGINAL extractor .38-40 or 44-40 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor... |
$106.00 CLICK HERE for More Info or to Order |
2 |
wp620-a |
|
|
This is the extractor .38 and .44 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor itself is a... |
$76.00 CLICK HERE for More Info or to Order
|
0 |
wp235 wop |
Winchester Original Part |
|
This is an ORIGINAL extractor .32-20 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor itself is a... |
$54.00 CLICK HERE for More Info or to Order
|
0 |
wp619-a |
|
|
This is the extractor .32-20 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor itself is a spring.... |
$66.50 CLICK HERE for More Info or to Order
|
0 |
wp618-a |
|
|
This is the extractor Winchester .22 cal 1873 rifle. This is the one piece extractor. There is no spring associated with this extractor because the... |
$43.50 CLICK HERE for More Info or to Order
|
0 |
wp160-a wop |
Winchester Original Part |
|
Dust Cover Winchester 1873 Third model ORIGINAL part. The amount of original Bluing varies. |
$196.00 CLICK HERE for More Info or to Order
|
0 |
wp160-b1 s&d wop |
Winchester Original Part |
|
Dust Cover Winchester 1873 Third model ORIGINAL part. The amount of original Bluing varies and has some dings and... |
$136.00 CLICK HERE for More Info or to Order
|
0 |
wp161-b wop |
Winchester Original Part |
|
This is the dust cover stop 1873 and 1876 Winchester lever action 2nd and 3rd model. (also called the mortise cover stop) This little part screws on... |
$34.79 CLICK HERE for More Info or to Order
|
0 |
wp602-b |
|
|
An ORIGINAL Stop for the Winchester 1873 1st model Dust cover (wp602-a). This part attaches to the end of the dust cover. The top extractor... |
$29.00 CLICK HERE for More Info or to Order
|
0 |
wp608-a |
|
|
This is the NEW REPRODUCTION dust cover stop 1873 and 1876 Winchester lever action 2nd and 3rd model. (also called the mortise cover stop) This... |
$29.50 CLICK HERE for More Info or to Order
|
0 |
wp161-a wop |
Winchester Original Part |
|
Dust Cover Stop screw ORIGINAL, Winchester 1873 2nd or 3rd model rifle and 1876 |
$6.75 CLICK HERE for More Info or to Order
|
0 |
wp610-x |
Winchester Original Part |
|
This is an ORIGINAL screw dust cover stop on the Winchester 1873 and 1876 second and third model rifle. This screw holds the dustcover stop,... |
$9.25 CLICK HERE for More Info or to Order
|
0 |
wp617-a |
|
|
This is the screw dust cover stop on the Winchester 1873 and 1876 second and third model rifle. This screw holds the dustcover stop, part number... |
$4.00 CLICK HERE for More Info or to Order |
251 |
wp161-c wop |
Winchester Original Part |
|
This is An ORIGINAL dust cover (mortise cover) spring Winchester 1873. AND 1876 it is held in place by a screw (wp607-a or the original... |
$8.75 CLICK HERE for More Info or to Order
|
0 |
wp610-a |
|
|
This is the dust cover (mortise cover) spring Winchester 1873. It is held in place by a screw (wp607A) in a rectangular cut out on the front of the... |
$11.75 CLICK HERE for More Info or to Order
|
0 |
wp161-d wop |
Winchester Original Part |
|
Dust Cover spring screw ORIGINAL Winchester 1873 rifle and 1876 |
$6.75 CLICK HERE for More Info or to Order
|
0 |
wp607-a |
|
|
This little screw holds on the dust cover (mortise cover) SPRING (part number 610A) on the Winchester 1873 and 1876 lever action rifle. It sits in... |
$4.25 CLICK HERE for More Info or to Order |
11 |
wp616-a |
|
|
This is the rail that attaches to the top of the receiver on the Winchester 1873 2nd model. This is what your dust cover slides on and the dust cover... |
$25.25 CLICK HERE for More Info or to Order
|
0 |
wp296-a |
Winchester Original Part |
|
This is an ORIGINAL dust (mortise cover) cover for the Winchester 1873 1st model lever-action Rifle and carbine. has the ... |
$192.00 CLICK HERE for More Info or to Order
|
0 |
wp602-a |
|
|
This is a dust (mortise cover) cover for the Winchester 1873 1st model lever-action Rifle and carbine. Each cover has the correct serrated thumb area... |
$92.00 CLICK HERE for More Info or to Order
|
0 |
wp606 |
|
|
This is a NEW Slide cover, also called the Dust or Mortise Cover, Winchester 1873. It slides onto the rail and keeps dust and dirt out of the... |
$85.00 CLICK HERE for More Info or to Order
|
0 |
cr103 |
|
|
A set of a 5-piece cleaning rod 1873 Winchester MUSKET. These are made in the USA. These rods will fit in the 38-40 or 44-40 stock through the trap... |
$125.75 CLICK HERE for More Info or to Order
|
0 |
cr101 |
|
|
A set of a 4-piece cleaning rod 1866 and 1873 Winchester sporting rifle. These are made in the USA. These rods will fit in the 38-40 or 44-40 stock... |
$109.00 CLICK HERE for More Info or to Order
|
0 |
cr102 |
|
|
A set of a 3-piece cleaning rod 1866 and 1873 Winchester CARBINE with a 20 inch barrel. These are made in the USA. These rods will fit in the 38-40... |
$94.50 CLICK HERE for More Info or to Order
|
0 |
wp604-b |
|
|
This is the cartridge stop Winchester 1873 .22 cal carrier block. It screws into the side of the carrier with screw wp603-b. This part holds the... |
$37.50 CLICK HERE for More Info or to Order
|
0 |
wp603-b |
|
|
This is the screw that attaches the cartridge stop (part number wp604-b) to the side of the Winchester 1873 .22 cal carrier block. |
$8.25 CLICK HERE for More Info or to Order |
3 |
wp799 wop |
Winchester Original Part |
|
This is an ORIGINAL carrier lever Winchester 1873 lever action rifle. This is the part that fits into the brass carrier and lifts it up and down. The... |
$94.50 CLICK HERE for More Info or to Order |
1 |
wp165-a wop |
Winchester Original Part |
|
Carrier Lever spring ORIGINAL Winchester 1873 (wp165a wop). There are two springs required, one left (Finger Lever) and this carrier lever spring on... |
$73.75 CLICK HERE for More Info or to Order
|
0 |
wp625-a |
|
|
This is the Carrier lever spring 1873 Winchester. This spring fits inside and on the bottm-right of the receiver(the side with the Loading gate... |
$18.50 CLICK HERE for More Info or to Order
|
0 |
wp588 |
|
|
This is a carrier BLOCK for the Winchester 1873 rifle or carbine. It fits the large cal rounds (44/38 cal)excellent condition used .has minor... |
$148.00 CLICK HERE for More Info or to Order |
1 |
wp587 |
|
|
This is a NEW carrier block Winchester model 1873. It fits the small cal rounds .32-20, 25-20. |
$78.00 CLICK HERE for More Info or to Order
|
0 |
wp627 wop |
Winchester Original Part |
|
This is an EXCELLENT condition almost impossible to find 1876 Carrier Block ORIGINAL 45-60 cal. Large Caliber Winchester... |
$308.00 CLICK HERE for More Info or to Order |
1 |
wp260-a wop |
Winchester Original Part |
|
Carrier Block ORIGINAL 44-40 Large Caliber Winchester model 1873. Lettering OF CALIBER DESIGNATION IS VISIBLE, but at different stages of wear. Will... |
$189.00 CLICK HERE for More Info or to Order |
1 |
wp291-a wop |
Winchester Original Part |
|
Carrier Block ORIGINAL 44-40 Large Caliber Winchester model 1873. no CALIBER DESIGNATION VISIBLE, has custom engraving on it by carrier... |
$79.00 CLICK HERE for More Info or to Order |
1 |
wp260-b wop |
Winchester Original Part |
|
Carrier Block ORIGINAL 38-40 Large Caliber Winchester model 1873. Still has some lettering. but do to age it is vary piece by... |
$148.00 CLICK HERE for More Info or to Order |
3 |
wp163 wop |
Winchester Original Part |
|
Carrier Block brass ORIGINAL Winchester 1873 in 32-20 Very good condition ORIGINAL part . p;atina and lettering vary do to age of item. |
$136.00 CLICK HERE for More Info or to Order |
3 |
bp842 |
|
|
This is A NEW crescent metal buttplate forthe Winchester 1890 pump .22, model 1904, 1892, 1894, 1895, and late 1886 RIFLES. The Winchester... |
CLICK HERE for More Info or to Order
|
0 |
bp862 |
|
|
This is the BLUED crescent metal buttplate Winchester 1890 pump .22 and the LEVER ACTION 1894 - 1892 - 1895 and late 1886 RIFLE. The Winchester 1873... |
$108.00 CLICK HERE for More Info or to Order
|
0 |
bp869 wop |
Winchester Original Part |
|
This is the ORIGINAL crescent metal buttplate for the Winchester 1890 pump .22 and also was used on the1892, 1894, 1892 and 1895 and late 1886... |
$155.00 CLICK HERE for More Info or to Order |
6 |
bp921 wop |
Winchester Original Part |
|
This is the ORIGINAL crescent metal buttplate that is COMPLETE for the large caliber Winchester 1873 RIFLE. The Winchester 1873 large caliber... |
$326.00 CLICK HERE for More Info or to Order
|
0 |
bp918 |
|
|
This is a LONG TANG crescent metal buttplate Winchester 1873 RIFLE. The Winchester 1873 .22 RIFLE and 32-20 used this buttplate (this is considered... |
$196.00 CLICK HERE for More Info or to Order |
1 |
wp180-b wop |
Winchester Original Part |
|
This is an ORIGINAL Buttplate Trap door SPRING for the 2ND AND 3RD model 38-40 and 44-40 Winchester 1873 Sporting Rifles. This will not... |
$36.50 CLICK HERE for More Info or to Order
|
0 |
wp374-b wop |
|
|
Buttplate Trap door SPRING for the 1866 and the 1st model 38-40 and 44-40 Winchester 1873 Sporting Rifles. This will not fit the carbine... |
$24.50 CLICK HERE for More Info or to Order
|
0 |
wp64-b1 |
|
|
This is the screw that attaches the Spring brass trap door on the buttplate of the Winchester 1866, 1876 and 1873 lever action rifles. The... |
$4.50 CLICK HERE for More Info or to Order |
25 |
wp349-a |
|
|
These are NEW BUTTPLATE SCREWS for THE 1903 AND 63 Winchester metal buttplate. These screws are shorter screw so they will not split the... |
$6.25 CLICK HERE for More Info or to Order |
37 |