Item Id+ |
Origin |
Product Image |
Item Name |
Price |
Quantity |
wp161-a wop |
Winchester Original Part |
|
Dust Cover Stop screw ORIGINAL, Winchester 1873 2nd or 3rd model rifle and 1876 |
$6.75 CLICK HERE for More Info or to Order
|
0 |
wp161-b wop |
Winchester Original Part |
|
This is the dust cover stop 1873 and 1876 Winchester lever action 2nd and 3rd model. (also called the mortise cover stop) This little part screws on... |
$34.79 CLICK HERE for More Info or to Order
|
0 |
wp161-c wop |
Winchester Original Part |
|
This is An ORIGINAL dust cover (mortise cover) spring Winchester 1873. AND 1876 it is held in place by a screw (wp607-a or the original... |
$8.75 CLICK HERE for More Info or to Order
|
0 |
wp161-d wop |
Winchester Original Part |
|
Dust Cover spring screw ORIGINAL Winchester 1873 rifle and 1876 |
$6.75 CLICK HERE for More Info or to Order
|
0 |
wp162 |
|
|
Left side plate for Winchester 1873 2nd and 3rd models. MACHINED in the USA SPECIFICALLY for the Antique... |
$69.75 CLICK HERE for More Info or to Order |
1 |
wp163 wop |
Winchester Original Part |
|
Carrier Block brass ORIGINAL Winchester 1873 in 32-20 Very good condition ORIGINAL part . p;atina and lettering vary do to age of item. |
$136.00 CLICK HERE for More Info or to Order |
3 |
wp165-a wop |
Winchester Original Part |
|
Carrier Lever spring ORIGINAL Winchester 1873 (wp165a wop). There are two springs required, one left (Finger Lever) and this carrier lever spring on... |
$75.75 CLICK HERE for More Info or to Order |
3 |
wp166-a wop |
Winchester Original Part |
|
This is an ORIGINAL forearm tip (cap) Winchester 1873 lever action rifle. It fits the LARGE caliber .. This part is For a ROUNBD barrel. |
$109.00 CLICK HERE for More Info or to Order
|
0 |
wp166-b wop |
Winchester Original Part |
|
This is an ORIGINAL forarm tip (cap) Winchester 1873 lever action rifle. It fits the large calibers in .38 & .44 WCF. This part is for a Sporting... |
$105.00 CLICK HERE for More Info or to Order
|
0 |
wp167-a wop |
Winchester Original Part |
|
This is an ORIGINAL Hammer PIN Winchester 1873. If you prefer to have a new PIN please see part number p124. Note: after approximately serial number... |
$9.50 CLICK HERE for More Info or to Order |
3 |
wp167-b wop |
Winchester Original Part |
|
This is a ORIGINAL hammer comlete that fits on the Winchester model 1866 and the 1873 lever action rifles. These are NOT reproductions so the finish... |
$129.25 CLICK HERE for More Info or to Order |
1 |
wp168-a wop |
Winchester Original Part |
|
Finger Lever catch pin ORIGINAL for the Winchester 1873. This small pointed pin inserts through the finger-lever latch post and holds the... |
$6.40 CLICK HERE for More Info or to Order |
1 |
wp168-b wop |
Winchester Original Part |
|
Finger Lever catch spring ORIGINAL for all Winchester 1873 guns. |
$32.00 CLICK HERE for More Info or to Order
|
0 |
wp168-c wop |
Winchester Original Part |
|
This is an ORIGINAL finger lever latch (also called the finger lever catch) Winchester 1873 2nd and 3rd model. It fits all 1876 model... |
$56.00 CLICK HERE for More Info or to Order
|
0 |
wp169-a wop |
Winchester Original Part |
|
Toggle Link Pin ORIGINAL for all Winchester 1873 rifles. |
$9.95 CLICK HERE for More Info or to Order
|
0 |
wp169-b wop |
Winchester Original Part |
|
Toggle Link Left ORIGINAL Winchester 1873 |
$156.00 CLICK HERE for More Info or to Order
|
0 |
wp169-c wop |
Winchester Original Part |
|
Right Toggle Link ORIGINAL for Winchester 1873. |
$156.00 CLICK HERE for More Info or to Order
|
0 |
wp17-a wop |
Winchester Original Part |
|
This is an ORIGINAL trigger that fits the Winchester models 1873/1876 and 1894. Note: In 1873 guns manufactured before number 28,000, the trigger and... |
$48.00 CLICK HERE for More Info or to Order |
22 |
WP17-a-pin |
Winchester Original Part |
|
This is an ORIGINAL pin that holds the trigger and sear in place on the Winchester model 1873 lower tang. Up to serial number 28,000 this pin was... |
$4.95 CLICK HERE for More Info or to Order |
3 |
wp17-a1 wop |
Winchester Original Part |
|
This is AN ORIGINAL pin that holds the trigger and sear in place on the Winchester model 1873 lower tang. Up to serial number 28,000 this pin... |
$5.25 CLICK HERE for More Info or to Order |
3 |
wp170-a wop |
Winchester Original Part |
|
Follower ORIGINAL for 38&44-40 Winchester 1873 |
$56.00 CLICK HERE for More Info or to Order
|
0 |
wp170-b wop |
Winchester Original Part |
|
Follower ORIGINAL for 32-20 Winchester 1873. This is an ORIGINAL Winchester part that fits inside the magazine tube. These... |
$56.00 CLICK HERE for More Info or to Order
|
0 |
wp171-a wop |
Winchester Original Part |
|
This is a Magazine Plug 38-40 & 44-40 caliber Winchester 1873 rifles. This magazine plug has a lip which locks into the underside of the barrel. |
$58.00 CLICK HERE for More Info or to Order
|
0 |
wp172-a wop |
Winchester Original Part |
|
Magazine Hanger (magazine ring) ORIGINAL for 32-20 Winchester 1873. The pin that goes through this hanger is part wp726 pin. |
$36.00 CLICK HERE for More Info or to Order
|
0 |
wp173-b wop |
Winchester Original Part |
|
This is an ORIGINAL Mainspring (also called hammer spring for a SET TRIGGER on 1873, 1892 and 1894 (pre-64) and model 53 Winchester lever action... |
$78.00 CLICK HERE for More Info or to Order
|
0 |
wp175-a |
Winchester Original Part |
|
This ORIGINAL PART is the pin that holds the finger lever into the receiver of the Winchester 1873 rifles. This pin goes through the receiver and... |
$9.95 CLICK HERE for More Info or to Order
|
0 |
wp176-b wop |
Winchester Original Part |
|
These are ORIGINAL NICKEL PLATED left and right side plates Winchester 1873 2nd and 3rd models. These are matched sets that were taken from... |
$170.00 CLICK HERE for More Info or to Order |
1 |
wp176CH wop |
Winchester Original Part |
|
These are ORIGINAL left and right side plates Winchester 1873 2nd and 3rd models. CASE HARDENED These are matched sets that were taken from ORIGINAL... |
$195.00 CLICK HERE for More Info or to Order
|
0 |
wp177 wop |
Winchester Original Part |
|
Side Plate for the left receiver side on the 1873 Winchester. This is an ORIGINAL. Winchester part so the bluing condition varies. |
$86.00 CLICK HERE for More Info or to Order
|
0 |
wp178-a wop |
Winchester Original Part |
|
Side Plate RIGHT 1873 Winchester ORIGINAL . Amount of original bluing varies. |
$96.00 CLICK HERE for More Info or to Order |
8 |
wp179 wop |
Winchester Original Part |
|
This finger lever spring that attaches to the inside on the left side of the receiver.(the side without the Loading gate (spring cover)) This ... |
$79.00 CLICK HERE for More Info or to Order |
2 |
wp180-b wop |
Winchester Original Part |
|
This is an ORIGINAL Buttplate Trap door SPRING for the 2ND AND 3RD model 38-40 and 44-40 Winchester 1873 Sporting Rifles. This will not... |
$36.50 CLICK HERE for More Info or to Order
|
0 |
wp180-c wop |
Winchester Original Part |
|
Buttplate Trap door Winchester 1873, This is an ORIGINAL Winchester part. |
$89.00 CLICK HERE for More Info or to Order
|
0 |
wp193-a wop |
Winchester Original Part |
|
ORIGINAL Screw that holds the safety bar into the lower tang |
$3.75 CLICK HERE for More Info or to Order |
6 |
wp193-b wop |
Winchester Original Part |
|
This is an ORIGINAL safety bar, also called the safety catch Winchester 1894-1873-1876 lever action rifles. This part sits down in the lower tang... |
$36.50 CLICK HERE for More Info or to Order |
6 |
wp193-c wop |
Winchester Original Part |
|
This is an ORIGINAL PIN for the safety bar, also called the safety catch Winchester 1894-1873-1876 lever-action rifles. This part fits... |
$4.50 CLICK HERE for More Info or to Order |
7 |
wp193-c wop |
|
|
This is AN ORIGINAL safety catch PIN for the Winchester 1873, 1894 and 1876 lever action rifle. This pin holds the safety bar in the lower tang... |
$3.95 CLICK HERE for More Info or to Order |
8 |
wp196-c later wop |
Winchester Original Part |
|
This is an ORIGINAL 1894 magazine plug, that does not have a lip and takes the long magazine plug screw. It has NO LIP and will fit Winchester model... |
$49.00 CLICK HERE for More Info or to Order |
1 |
wp204 wop |
Winchester Original Part |
|
This an ORIGINAL hanger that attaches to the underside of the barrel on the Winchester 1873 and 1892 rifle (or carbine) in 25-20 or 32-20 cal. This... |
$63.00 CLICK HERE for More Info or to Order
|
0 |
wp206-b wop |
Winchester Original Part |
|
This an ORIGINAL hanger that attaches to the underside of the barrel on the Winchester 1873 and 1892 rifle (or carbine) in larger calibers. This... |
$58.00 CLICK HERE for More Info or to Order
|
0 |
wp211-c |
Winchester Original Part |
|
This is an ORIGINAL trigger spring, also called the sear spring for the Winchester 1873 and early 1894 rifles. This spring sits under the safety... |
$26.75 CLICK HERE for More Info or to Order
|
0 |
wp214-a wop |
Winchester Original Part |
|
PHOTO IS AN EXAMPLE OF An ORIGINAL stripped receiver for a large caliber (38-40 or 44-40) Winchester 1873 These Third model receivers do not... |
$326.00 CLICK HERE for More Info or to Order
|
0 |
wp214-b wop |
Winchester Original Part |
|
An ORIGINAL stripped receiver for a small caliber (32-20) Winchester 1873. These Third model receivers do not have serial numbers and were made... |
$296.00 CLICK HERE for More Info or to Order |
2 |
wp231 wop |
Winchester Original Part |
|
These are ORIGINAL large style slot head buttplate screws for regular black hardened plastic, crescent style and carbine style metal buttplates on... |
$8.25 CLICK HERE for More Info or to Order |
18 |
wp235 wop |
Winchester Original Part |
|
This is an ORIGINAL extractor .32-20 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor itself is a... |
$54.00 CLICK HERE for More Info or to Order
|
0 |
wp236 wop |
Winchester Original Part |
|
This is an ORIGINAL extractor .38-40 or 44-40 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor... |
$106.00 CLICK HERE for More Info or to Order |
2 |
wp243-a wop |
Winchester Original Part |
|
Sear ORIGINAL Winchester model 1873. Fits with the trigger on the lower tang. This sear only fits 73 Winchester rifles. |
$59.00 CLICK HERE for More Info or to Order
|
0 |
wp259 wop |
Winchester Original Part |
|
This is an ORIGINAL firing pin for the 2nd and 3rd model Winchester 1873 lever-action rifles in the .44-40 or .38-40 caliber. If you have a 1st... |
$76.00 CLICK HERE for More Info or to Order
|
0 |
wp260-a wop |
Winchester Original Part |
|
Carrier Block ORIGINAL 44-40 Large Caliber Winchester model 1873. Lettering OF CALIBER DESIGNATION IS VISIBLE, but at different stages of wear. Will... |
$189.00 CLICK HERE for More Info or to Order |
1 |
wp260-b wop |
Winchester Original Part |
|
Carrier Block ORIGINAL 38-40 Large Caliber Winchester model 1873. Still has some lettering. but do to age it is vary piece by... |
$148.00 CLICK HERE for More Info or to Order |
3 |
wp261-a wop |
Winchester Original Part |
|
This is the hammer stirrup Winchester 1866 1873 1876 1886 lever-action rifles and the 1897 and 1893 shotgun. This part attaches to the... |
$12.95 CLICK HERE for More Info or to Order
|
0 |
wp261-b wop |
Winchester Original Part |
|
This is the Hammer Stirrup PIN Winchester for the Winchester 1866 1873 1876 1886 1892 and 1894 lever-action rifle. |
$3.50 CLICK HERE for More Info or to Order |
1 |
wp275-a wop |
Winchester Original Part |
|
This is an ORIGINAL smll caliber magazine plug Winchester 1873 and 1892, fitting caliers .25, .20 and .32, .20 lever action rifles. This plug has the... |
$52.00 CLICK HERE for More Info or to Order
|
-2 |
wp291-a wop |
Winchester Original Part |
|
Carrier Block ORIGINAL 44-40 Large Caliber Winchester model 1873. no CALIBER DESIGNATION VISIBLE, has custom engraving on it by carrier... |
$79.00 CLICK HERE for More Info or to Order |
1 |
wp292 wop |
|
|
This is the hard to find ORIGINAL firing pin for the FIRST model Winchester 1873 .44 and .38 caliber lever action rifle. First... |
$74.25 CLICK HERE for More Info or to Order
|
0 |
wp294-a |
|
|
This is the hard to find ORIGINAL sling swivel with the base and wire loop. It is placed on the buttstock of the Winchester 1866, 1876, 1873, 1892,... |
$48.75 CLICK HERE for More Info or to Order
|
0 |
wp296-a |
Winchester Original Part |
|
This is an ORIGINAL dust (mortise cover) cover for the Winchester 1873 1st model lever-action Rifle and carbine. has the ... |
$192.00 CLICK HERE for More Info or to Order
|
0 |
wp296-b wop |
Winchester Original Part |
|
This is an ORIGINAL Breech Bolt Winchester model 1873 in the LARGE cal (38-40 and 44-40). The bolt is stripped and the extractor, part number wp620,... |
$175.00 CLICK HERE for More Info or to Order |
2 |
wp298-b |
|
|
This is an ORIGINAL Mainspring (also called hammer spring (mainspring)) for 1873, 1892 and 1894 (pre-64) and model 53 Winchester lever action rifles.... |
$76.00 CLICK HERE for More Info or to Order |
2 |
wp349-a |
|
|
These are NEW BUTTPLATE SCREWS for THE 1903 AND 63 Winchester metal buttplate. These screws are shorter screw so they will not split the... |
$6.25 CLICK HERE for More Info or to Order |
37 |
wp369-a wop |
Winchester Original Part |
|
This is an ORIGINAL sear and safety catch spring from a Winchester 1894 (also called the trigger stop spring). They used this one piece type from... |
$19.00 CLICK HERE for More Info or to Order |
3 |
wp374-b wop |
|
|
Buttplate Trap door SPRING for the 1866 and the 1st model 38-40 and 44-40 Winchester 1873 Sporting Rifles. This will not fit the carbine... |
$24.50 CLICK HERE for More Info or to Order
|
0 |
wp400 wop |
Winchester Original Part |
|
Winchester 1 inch Rear sling swivel stud. For Models 70 pre 64, Model 100 and 770 This is a Winchester original Part Fits 1... |
$25.00 CLICK HERE for More Info or to Order |
9 |
wp5 |
|
|
This saddle ring fits into the saddle ring stud or the U-shaped staple on the side of the model 1866, 1876, 1873, 1892, 1894 and 1895 Winchester... |
$12.00 CLICK HERE for More Info or to Order |
56 |
wp502-a early wop |
Winchester Original Part |
|
This is an ORIGINAL 1894 magazine plug, that is slotted and takes the earlier short magazine plug screw. It has NO LIP and will fit Winchester... |
$76.00 CLICK HERE for More Info or to Order |
2 |
wp503 |
|
|
This is the CENTER barrel band screw Winchester 1873 MUSKET. It has been made LARGER than the standard screw for stripped out barrel bands. You will... |
$10.00 CLICK HERE for More Info or to Order
|
0 |
wp504 |
|
|
This is the CENTER barrel band screw Winchester 1873 MUSKET. OAL 1.135 in. |
$7.75 CLICK HERE for More Info or to Order
|
0 |
wp520 |
|
|
Tang Screw custom made extra LONG so it can be fit to any number of Winchester Lever Action rifles. It retains all... |
$8.25 CLICK HERE for More Info or to Order |
344 |
wp53 |
|
|
Plug screw that fits into the upper tang on the 1890 or 1906, 1903, 62, 62A, 63 1866 1873 1876 1892 1894 1886 model 53 and 65 Winchester... |
$3.95 CLICK HERE for More Info or to Order |
264 |
wp536-b |
|
|
This is the magazine plug Winchester 1873 and 1892 small cal rifles (.25 and .32) that have the 1/2 and 3/4 length magazine tube. This plug HAS a lip... |
$28.50 CLICK HERE for More Info or to Order
|
0 |
wp54-b |
|
|
This is the XTRA LONG screw that attaches the forForearm cap to the forForearm cap tenon. NOTE: There are few instances where longer forForearm cap... |
$5.25 CLICK HERE for More Info or to Order |
207 |
wp557 wop |
Winchester Original Part |
|
This is an ORIGINAL set of Toggle links Winchester 1873 antique rifle. These parts will NOT fit the newer reproduction 1873s. They come with 2 toggle... |
$305.00 CLICK HERE for More Info or to Order
|
0 |
wp56 |
|
|
This is the screw that attaches the forForearm cap (which holds your wooden forForearm/ foregrip onto the rifle) to the forForearm cap tenon. There... |
$3.75 CLICK HERE for More Info or to Order |
5 |
wp57 |
|
|
These are the exact replicas of the large original style slot head buttplate screws crescent style and carbine style metal buttplates on the... |
$4.95 CLICK HERE for More Info or to Order |
729 |
wp573 |
|
|
This tenon fits the Winchester 1873/1892/1894. This part sits in a dove-tailed cut out on the underside of the barrel. There are NO screw hole tapped... |
$29.50 CLICK HERE for More Info or to Order
|
0 |
wp587 |
|
|
This is a NEW carrier block Winchester model 1873. It fits the small cal rounds .32-20, 25-20. |
$78.00 CLICK HERE for More Info or to Order
|
0 |
wp588 |
|
|
This is a carrier BLOCK for the Winchester 1873 rifle or carbine. It fits the large cal rounds (44/38 cal)excellent condition used .has minor... |
$148.00 CLICK HERE for More Info or to Order |
1 |
wp589-a wop |
Winchester Original Part |
|
This is an ORIGINAL Screw Loading gate (spring cover) on the 2nd and 3rd model Winchester 1873. The bluing varies being that these are ORIGINAL parts. |
$9.95 CLICK HERE for More Info or to Order
|
0 |
wp589-b wop |
Winchester Original Part |
|
This is an ORIGINAL Loading gate (spring cover) 2nd and 3rd model Winchester 1873. The bluing varies being that these are ORIGINAL parts |
$98.25 CLICK HERE for More Info or to Order
|
0 |
wp591 |
|
|
This is the swivel 1 inch sling that attaches to the magazine tube on your Winchester 1873 1892 and 1894 rifles. It fits all of the 1894 models and... |
$15.25 CLICK HERE for More Info or to Order
|
0 |
wp595 |
|
|
This is the wood swivel stud that screws into forearm on rifles to attach sling to. |
$4.50 CLICK HERE for More Info or to Order |
18 |
wp601-b |
|
|
This is the receiver side tang screw FIRST model 1873. This screw attatches the lower receiver tang to the main frame on the rifle. The length is... |
$6.00 CLICK HERE for More Info or to Order |
13 |
wp602-a |
|
|
This is a dust (mortise cover) cover for the Winchester 1873 1st model lever-action Rifle and carbine. Each cover has the correct serrated thumb area... |
$92.00 CLICK HERE for More Info or to Order
|
0 |
wp602-b |
|
|
An ORIGINAL Stop for the Winchester 1873 1st model Dust cover (wp602-a). This part attaches to the end of the dust cover. The top extractor... |
$29.00 CLICK HERE for More Info or to Order
|
0 |
wp603-a |
|
|
This is the screw that holds on the finger lever on the Winchester 1873 rifle. It goes through the left side of the receiver below the sideplate and... |
$5.25 CLICK HERE for More Info or to Order |
82 |
wp603-b |
|
|
This is the screw that attaches the cartridge stop (part number wp604-b) to the side of the Winchester 1873 .22 cal carrier block. |
$8.25 CLICK HERE for More Info or to Order |
3 |
wp604-a |
|
|
This screw secures the finger lever spring and the carrier lever spring to the bottom of the receiver behind the brass carrier Winchester model 1866,... |
$4.00 CLICK HERE for More Info or to Order |
230 |
wp604-b |
|
|
This is the cartridge stop Winchester 1873 .22 cal carrier block. It screws into the side of the carrier with screw wp603-b. This part holds the... |
$37.50 CLICK HERE for More Info or to Order
|
0 |
wp605-a |
|
|
This is the screw that holds on the side plate on the Winchester 1873 3rd model. Serial number above 90,000 (thread is 3/16-36)If you have a 1st or... |
$6.95 CLICK HERE for More Info or to Order |
43 |
wp605-b |
|
|
This is the screw that holds on the side plate on the FIRST and second model Winchester 1873. This only fits rifles that have a serial number below... |
$9.45 CLICK HERE for More Info or to Order |
22 |
wp606 |
|
|
This is a NEW Slide cover, also called the Dust or Mortise Cover, Winchester 1873. It slides onto the rail and keeps dust and dirt out of the... |
$85.00 CLICK HERE for More Info or to Order
|
0 |
wp607-a |
|
|
This little screw holds on the dust cover (mortise cover) SPRING (part number 610A) on the Winchester 1873 and 1876 lever action rifle. It sits in... |
$4.25 CLICK HERE for More Info or to Order |
11 |
wp607-b |
|
|
This is the finger lever cam Winchester 1873 rifle. This little part fits into your finger lever and is what the finger lever spring rides on. It... |
$36.25 CLICK HERE for More Info or to Order
|
0 |
wp608-a |
|
|
This is the NEW REPRODUCTION dust cover stop 1873 and 1876 Winchester lever action 2nd and 3rd model. (also called the mortise cover stop) This... |
$29.50 CLICK HERE for More Info or to Order
|
0 |
wp608-b |
|
|
This tension screw sits in the lower tang of the Winchester model 1873 and 1876. On the 1873 model, it sits right in front of the mainspring screw.... |
$4.25 CLICK HERE for More Info or to Order |
46 |
wp609 |
|
|
This is a new LEFT side plate Winchester 1873 3rd model. (This will fit 2nd model if 3rd model side plate screw is used). It has a hole for side... |
$60.95 CLICK HERE for More Info or to Order
|
0 |
wp610-a |
|
|
This is the dust cover (mortise cover) spring Winchester 1873. It is held in place by a screw (wp607A) in a rectangular cut out on the front of the... |
$11.75 CLICK HERE for More Info or to Order
|
0 |
wp610-x |
Winchester Original Part |
|
This is an ORIGINAL screw dust cover stop on the Winchester 1873 and 1876 second and third model rifle. This screw holds the dustcover stop,... |
$9.25 CLICK HERE for More Info or to Order
|
0 |
wp611 |
|
|
This is a new Right side plate Winchester 1873 second and third model. It has threaded holes for spring cover screw and side plate screw. THIS IS... |
$62.75 CLICK HERE for More Info or to Order
|
0 |
wp612-b wop |
Winchester Original Part |
|
Tenon ORIGINAL holds on the Forearm cap and fits the Winchester 1873, Winchester 1866, 1873,1892, and 1894. This is an ORIGINAL Winchester part... |
$48.59 CLICK HERE for More Info or to Order |
4 |
wp613 |
|
|
This screw attaches the lower tang to the main receiver on the rifle. There is one screw on each side. On the 2nd model lower tang the... |
$3.25 CLICK HERE for More Info or to Order |
18 |
wp614-a |
Winchester Original Part |
|
This is the safety bar (trigger stop) spring, also called the safety catch spring, used on the Winchester 1894 (up to serial num 400,000)... |
$22.75 CLICK HERE for More Info or to Order
|
0 |
wp614-aa |
|
|
This is A NEW safety bar spring, also called the safety catch spring. used on the Winchester 1894 (up to serial num 400,000) and on the... |
$12.75 CLICK HERE for More Info or to Order
|
0 |
wp615-a |
|
|
This is the hard to find firing pin retractor Winchester 1873 lever action rifle. This litle part goes into the breechbolt on the lower left bottom... |
$28.25 CLICK HERE for More Info or to Order |
43 |
wp616-a |
|
|
This is the rail that attaches to the top of the receiver on the Winchester 1873 2nd model. This is what your dust cover slides on and the dust cover... |
$25.25 CLICK HERE for More Info or to Order
|
0 |
wp616-b |
|
|
This is the trigger spring, also called the sear spring Winchester 1873 and early 1894 rifles. This spring sits under the safety bar (trigger block)... |
$11.75 CLICK HERE for More Info or to Order
|
0 |
wp617-a |
|
|
This is the screw dust cover stop on the Winchester 1873 and 1876 second and third model rifle. This screw holds the dustcover stop, part number... |
$4.00 CLICK HERE for More Info or to Order |
251 |
wp618-a |
|
|
This is the extractor Winchester .22 cal 1873 rifle. This is the one piece extractor. There is no spring associated with this extractor because the... |
$43.50 CLICK HERE for More Info or to Order
|
0 |
wp619-a |
|
|
This is the extractor .32-20 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor itself is a spring.... |
$66.50 CLICK HERE for More Info or to Order
|
0 |
wp620-a |
|
|
This is the extractor .38 and .44 cal Winchester 1873 rifle. There is no spring associated with this extractor because the extractor itself is a... |
$76.00 CLICK HERE for More Info or to Order
|
0 |
wp620-b |
|
|
This is a newly made front barrel band Winchester 1866 and 1873 carbine Made for the original Winchester not reproduction and comes in the... |
$88.75 CLICK HERE for More Info or to Order
|
0 |
wp621-a |
|
|
This is the screw that holds the hammer spring (also called mainspring) in place on the Winchester 1873 AND 1866 lever action rifle. |
$5.25 CLICK HERE for More Info or to Order |
51 |
wp624-a |
|
|
This finger lever spring attaches inside on the left of the receiver.(the side with out the Loading gate (spring cover)) This replacement spring... |
$38.50 CLICK HERE for More Info or to Order
|
0 |
wp624-b |
|
|
Spring that maintains tension on the finger lever latch on the Winchester 1873 3rd model. On the 1876 This spring was used after serial number 400.... |
$10.25 CLICK HERE for More Info or to Order
|
0 |
wp625-a |
|
|
This is the Carrier lever spring 1873 Winchester. This spring fits inside and on the bottm-right of the receiver(the side with the Loading gate... |
$18.50 CLICK HERE for More Info or to Order
|
0 |
wp625-b |
|
|
This is the finger lever latch (also called the finger lever catch) Winchester 1873 2nd and 3rd model. It fits all 1876 model rifles. This part is... |
$25.50 CLICK HERE for More Info or to Order
|
0 |
wp626-a |
|
|
NEWLY ARRIVED! This is the wood screw lower tang on the Winchester 1866, 1873, 1876, 1886 and model 1885 rifle. It is located at the very back of the... |
$6.25 CLICK HERE for More Info or to Order |
186 |
wp627 wop |
Winchester Original Part |
|
This is an EXCELLENT condition almost impossible to find 1876 Carrier Block ORIGINAL 45-60 cal. Large Caliber Winchester... |
$308.00 CLICK HERE for More Info or to Order |
1 |
wp628-a |
|
|
This is the hard to find sling swivel with the base and wire loop. It is placed on the buttstock of the Winchester 1866, 1876, 1873, 1892, 1894 and... |
$41.75 CLICK HERE for More Info or to Order
|
0 |
wp631 |
|
|
This is the screw that goes through the front barrel band on the Winchester 1873. The threads are right under the head of the screw 6-48 thread. |
$8.45 CLICK HERE for More Info or to Order |
407 |
wp632 |
|
|
This is the rear band screw for a Winchester 1873. This screw goes through the rear barrel band that holds on the forearm. The threads are 6-48... |
$9.45 CLICK HERE for More Info or to Order |
420 |
wp633 |
|
|
This is the magazine plug first model Winchester 1873 lever action rifle. This plug fits the THREADED magazine tube of the large cal rifles. This... |
$32.50 CLICK HERE for More Info or to Order
|
0 |
wp64-a |
|
|
This is the screw (long) that goes into the magazine plug on the Winchester 1866, 1873, 1892, 1894 lever action rifles, and model 53. This screw goes... |
$4.25 CLICK HERE for More Info or to Order |
564 |
wp64-b |
|
|
This is the screw (short) that goes into the magazine plug on the Winchester 1873/1892/1894/1886/ 1866 and model 53 lever action rifles. If you have... |
$3.85 CLICK HERE for More Info or to Order |
16 |
wp64-b1 |
|
|
This is the screw that attaches the Spring brass trap door on the buttplate of the Winchester 1866, 1876 and 1873 lever action rifles. The... |
$4.50 CLICK HERE for More Info or to Order |
25 |
wp643 |
|
|
This is the breech pin base extension also called the firing pin Winchester 1873 .22 caliber rifle. The breech bolt and firing pin is different... |
$25.25 CLICK HERE for More Info or to Order
|
0 |
wp644 |
|
|
This is the hard to find sling swivel wire LOOP only. It fits into the buttstock sling mount on the Winchester 1866, 1876, 1873, 1892, 1894 and 1895.... |
$12.25 CLICK HERE for More Info or to Order
|
0 |
wp67 |
|
|
This is the tang screw (also called the stock bolt) which attaches the stock to the gun. This screw goes down through the upper tang behind the... |
$5.75 CLICK HERE for More Info or to Order |
168 |
wp71-f |
|
|
Spring cover screw Winchester 1892 , 1894 , 1873 lever action. It also fits Winchester model 65, 66, 55, 53,1876 and model 53. This screw... |
$3.75 CLICK HERE for More Info or to Order |
366 |
wp71-i |
|
|
This is the screw that holds on the front of the Lyman and Marbles tang sight. It goes into the front hole (where the stock screw goes into the rear... |
$3.75 CLICK HERE for More Info or to Order |
110 |